260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air bubbles was 1415 g and the weight of pycnometer filled with water alone was 1275 g. The moisture content in the soil is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture
content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining
water filled in pycnometer without air bubbles was 1415 g and the weight of pycnometer filled
with water alone was 1275 g. The moisture content in the soil is
(A) 24.2 %
(B) 18.2 %
(C) 53.8 %
(D) None of these
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The weight of a pycnometer containing 400 g sand and water full to the top is 2150 g. The weight of pycnometer full of clean water is 1950 g. If specific gravity of the soil is 2.5, the water content is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Description : The weight of a pycnometer containing 400 g sand and water full to the top is 2150 g. The weight of pycnometer full of clean water is 1950 g. If specific gravity of the soil is 2.5, the water content is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (D) 20 %

The total weight of a pycnometer with water and oven dried soil 20 (g) is 1600 g. The pycnometer filled with water alone weighs 1500 g. The specific gravity of the soil, is (A) 1.0 (B) 1.5 (C) 2.0 (D) 2.5

Description : The total weight of a pycnometer with water and oven dried soil 20 (g) is 1600 g. The pycnometer filled with water alone weighs 1500 g. The specific gravity of the soil, is (A) 1.0 (B) 1.5 (C) 2.0 (D) 2.5

Last Answer : (C) 2.0

For determine the specific gravity of soil solids, using a pycnometer of 500 cc., the following data is available : Weight of dry empty pycnometer = 125 g Weight of dried soil and pycnometer = 500 g Weight of dried soil and distilled = 850 g water filled in pycnometer up to top The specific gravity of soil solids, is (A) 2.0 (B) 2.25 (C) 2.50 (D) 2.75

Description : For determine the specific gravity of soil solids, using a pycnometer of 500 cc., the following data is available : Weight of dry empty pycnometer = 125 g Weight of dried soil and pycnometer = 500 g Weight of dried soil and distilled ... of soil solids, is (A) 2.0 (B) 2.25 (C) 2.50 (D) 2.75

Last Answer : (C) 2.50

A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Description : A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Last Answer : (B) 55.6 %

For determining the moisture content of a soil sample, the following data is available Weight of container = 260 g, Weight of soil sample and = 320 g container, Weight of soil sample (dried) and = 310 g container. The moisture content of the soil sample, is (A) 15 % (B) 18 % (C) 20 % (D) 25 %

Description : For determining the moisture content of a soil sample, the following data is available Weight of container = 260 g, Weight of soil sample and = 320 g container, Weight of soil sample (dried) and = 310 g container. The moisture content of the soil sample, is (A) 15 % (B) 18 % (C) 20 % (D) 25 %

Last Answer : (C) 20 %

A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Description : A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Last Answer : Answer: Option C

A soil sample of mass specific gravity 1.92 has moisture content 30%. If the specific gravity of solids is 2.75, the degree of saturation, is (A) 95.4 % (B) 95.5 % (C) 95.6 % (D) 95.7 %

Description : A soil sample of mass specific gravity 1.92 has moisture content 30%. If the specific gravity of solids is 2.75, the degree of saturation, is (A) 95.4 % (B) 95.5 % (C) 95.6 % (D) 95.7 %

Last Answer : Option D

Degree of saturation of a natural soil deposit having water content 15%, specific gravity 2.50 and void ratio 0.5, is (A) 50 % (B) 60 % (C) 75 % (D) 80 %

Description : Degree of saturation of a natural soil deposit having water content 15%, specific gravity 2.50 and void ratio 0.5, is (A) 50 % (B) 60 % (C) 75 % (D) 80 %

Last Answer : (C) 75 %

If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Description : If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Last Answer : Answer: Option D

A soil sample of mass specific gravity 1.92 has moisture content 30%. If the specific gravity of solids is 2.75, the void ratio, is (A) 0.858 (B) 0.860 (C) 0.862 (D) 0.864

Description : A soil sample of mass specific gravity 1.92 has moisture content 30%. If the specific gravity of solids is 2.75, the void ratio, is (A) 0.858 (B) 0.860 (C) 0.862 (D) 0.864

Last Answer : Option C

A pycnometer is used to determine (A) Water content and voids ratio (B) Specific gravity and dry density (C) Water content and specific gravity (D) Voids ratio and dry density

Description : A pycnometer is used to determine (A) Water content and voids ratio (B) Specific gravity and dry density (C) Water content and specific gravity (D) Voids ratio and dry density

Last Answer : (C) Water content and specific gravity

If water content of a soil is 40%, G is 2.70 and void ratio is 1.35, the degree of saturation is (A) 70 % (B) 75 % (C) 80 % (D) 85 %

Description : If water content of a soil is 40%, G is 2.70 and void ratio is 1.35, the degree of saturation is (A) 70 % (B) 75 % (C) 80 % (D) 85 %

Last Answer : Answer: Option C

Write step by step procedure to determine specific gravity of soil by pycnometer in laboratory.

Description : Write step by step procedure to determine specific gravity of soil by pycnometer in laboratory.

Last Answer : 1. Clean the pycnometer and dry it, find the mass of pycnometer, brass cap and washer accurate to 1g. say M1 2. Put about 200gm to 400gm of wet soil sample in pycnometer and find its mass with its cap ... it top of cap and find its weight say M4. 5. The specific gravity is calculated by 

Define specific gravity of soil. Explain the stepwise procedure of determination of specific gravity of soil by pycnometer.

Description : Define specific gravity of soil. Explain the stepwise procedure of determination of specific gravity of soil by pycnometer. 

Last Answer : Specific Gravity: It is ratio of unit weight in air of a given volume of soil solids at a specific temperature to unit weight in air of an equal volume of distilled water at same temperature. ... Repeat all above steps two more times to calculate average specific gravity of given soil sample.

A saturated soil sample has water content of 40% and specific gravity of soil particles 2.7. The void ratio of the soil, is (A) 0.4 (B) 0.52 (C) 1.08 (D) None of these

Description : A saturated soil sample has water content of 40% and specific gravity of soil particles 2.7. The void ratio of the soil, is (A) 0.4 (B) 0.52 (C) 1.08 (D) None of these

Last Answer : (C) 1.08

PROBLEM EA Sample of moist soil has a water content of 20.0% and the moist unit weight of 21.09 KN/cu.meter. The specific gravity of the soil is 2.75. Compute the degree of saturation and the value of porosity?

Description : PROBLEM EA Sample of moist soil has a water content of 20.0% and the moist unit weight of 21.09 KN/cu.meter. The specific gravity of the soil is 2.75. Compute the degree of saturation and the value of porosity?

Last Answer : two seconds

Two jars having a capacity of 3 and 5 litres respectively are filled with mixtures of milk and water. In the smaller jar 25% of the mixture is milk and in the larger 25% of the mixture is water. The jars are emptied into a 10 litre cask whose remaining capacity is filled up with water. Find the percentage of milk in the cask. a) 55% b) 50% c) 45% d) 25% e) None of these

Description : Two jars having a capacity of 3 and 5 litres respectively are filled with mixtures of milk and water. In the smaller jar 25% of the mixture is milk and in the larger 25% of the mixture is water. The jars are emptied ... the percentage of milk in the cask. a) 55% b) 50% c) 45% d) 25% e) None of these

Last Answer : Answer: D 0.75+3.75=4.5/10+8*100=4.5/18*100=25%

If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Description : If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Last Answer : (B) 250 kg

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

The average price of 10 books is Rs. 12 while the average price of 8 of these books is Rs. 11.75. Of the remaining two books, if the price of one book is 60% more than the price of the other, what is the price of each of these two books? A.Rs 10 and Rs 16 B.Rs 12 and Rs 24 C.Rs 24 and Rs 18 D.Rs 28 and Rs 12 E.None of these

Description : The average price of 10 books is Rs. 12 while the average price of 8 of these books is Rs. 11.75. Of the remaining two books, if the price of one book is 60% more than the price of the other, what is the price of ... and Rs 16 B.Rs 12 and Rs 24 C.Rs 24 and Rs 18 D.Rs 28 and Rs 12 E.None of these

Last Answer : Answer - A (Rs 10 and Rs 16) Explanation - Total price of the two books = Rs. [(12 x 10) - (11.75 x 8)] = Rs. (120 - 94) = Rs. 26 Let the price of one book be Rs.x Then, the price of other book = Rs. (x ... /5)x= (8/5)x so, x +(8/5)x=26 , x=10 The prices of the two books are Rs. 10 and Rs. 16

Which of the following methods is most accurate for the determination of the water content of soil? (A) Oven drying method (B) Sand bath method (C) Calcium carbide method (D) Pycnometer method

Description : Which of the following methods is most accurate for the determination of the water content of soil? (A) Oven drying method (B) Sand bath method (C) Calcium carbide method (D) Pycnometer method

Last Answer : Option A

You are given a sample of soil containing coarse grains to determine its water content, you will use (A) Pycnometer (B) Oven-drying method (C) Calcium carbide method (D) Alcohol method

Description : You are given a sample of soil containing coarse grains to determine its water content, you will use (A) Pycnometer (B) Oven-drying method (C) Calcium carbide method (D) Alcohol method

Last Answer : Answer: Option A

A sample of saturated soil has 30% water content and the specific gravity of soil grains is 2.6. The dry density of the soil mass in g/cm3 , is (A) 1.47 (B) 1.82 (C) 1.91 (D) None of these

Description : A sample of saturated soil has 30% water content and the specific gravity of soil grains is 2.6. The dry density of the soil mass in g/cm3 , is (A) 1.47 (B) 1.82 (C) 1.91 (D) None of these

Last Answer : (D) None of these

In a liquid limit test, the moisture content at 10 blows was 70% and that at 100 blows was 20%. The liquid limit of the soil, is (A) 35 % (B) 50 % (C) 65 % (D) None of these

Description : In a liquid limit test, the moisture content at 10 blows was 70% and that at 100 blows was 20%. The liquid limit of the soil, is (A) 35 % (B) 50 % (C) 65 % (D) None of these

Last Answer : Answer: Option C

A candidate scoring 50% in an examination fails by 60 marks , while another candidate scores 75 % mark, gets 40 marks more than the minimum pass marks . Find the minimum pass mark. a) 125 b) 220 c) 140 d) 260 e) 298

Description :  A candidate scoring 50% in an examination fails by 60 marks , while another candidate scores 75 % mark, gets 40 marks more than the minimum pass marks . Find the minimum pass mark. a) 125 b) 220 c) 140 d) 260 e) 298

Last Answer : Answer: B  Let x be the maximum marks,  Then (50% of x)+60 = (75% of x)-40  x/2 +60 = 3x/4 -20  60+20 = 3x/4 – x/ 2 X=320  Hence maximum marks = 320  Minimum pass marks = 320/2 + 60 = 220

Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination of the moisture content (C) The absorption and porosity of an aggregate influence the property of the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination ... and porosity of an aggregate influence the property of the concrete (D) All the above

Last Answer : Answer: Option D

Fundamental relationship between dry density ( d), specific gravity (G), water content ( ) and percentage of air voids (na) is: (A) d = (1 - na) G (1 + ) (B) d = (1 + na) G (1 + ) (C) d = (1 + na) G (1 - ) (D) d = (1 - na) G (1 - )

Description : Fundamental relationship between dry density ( d), specific gravity (G), water content ( ) and percentage of air voids (na) is: (A) d = (1 - na) G (1 + ) (B) d = (1 + na) G (1 + ) (C) d = (1 + na) G (1 - ) (D) d = (1 - na) G (1 - )

Last Answer : Answer: Option A

The practical limit of moisture content achieved in air drying of timber is (A) 5 % (B) 15 % (C) 25 % (D) 35

Description : The practical limit of moisture content achieved in air drying of timber is (A) 5 % (B) 15 % (C) 25 % (D) 35 %

Last Answer : Answer: Option B

Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Description : Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Last Answer : Answer: Option D

Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Description : Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Last Answer : (D) All 'a', 'b' & 'c

A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Description : A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Last Answer : Option B

Write step by step procedure for determination of specific gravity by pycnometer bottle.

Description : Write step by step procedure for determination of specific gravity by pycnometer bottle. 

Last Answer : Procedure for determination of specific gravity by pycnometer bottle: 1. Clean the pycnometer bottle and dry it. Take the weight of empty pycnometer with conical cap as W1' gm. 2. Oven dry the ... 8. Repeat all above steps two more times to calculate average specific gravity of given soil sample.

The ratio of the weight of given volume of soil solids to the weight of an equal volume of distilled water at the given temperature, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Description : The ratio of the weight of given volume of soil solids to the weight of an equal volume of distilled water at the given temperature, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (B) Specific gravity

The ratio of the weight of water to the weight of solids in a given mass of soil, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Description : The ratio of the weight of water to the weight of solids in a given mass of soil, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : Answer: Option D

A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Description : A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Last Answer : Answer: Option B

3 faucet P,Q & R can fill a cistern in 12 hrs. After working together for 4hrs, R is closed P and Q can fill the remaining part in 14 hrs. The number of hrs taken by R alone to fill the cistern is. A) 18 hrs B) 20 hrs C) 28hrs D) 30hrs

Description :  3 faucet P,Q & R can fill a cistern in 12 hrs. After working together for 4hrs, R is closed P and Q can fill the remaining part in 14 hrs. The number of hrs taken by R alone to fill the cistern is. A) 18 hrs B) 20 hrs C) 28hrs D) 30hrs

Last Answer : C  Part filled in 4 hrs = 4/12 = 1/3 Remaining part = 2/3 (P+Q)’s 14 hrs work = 2/3 (P+Q)’s 1 hr work = 2/ 3 *14 = 1/21 R’s 1 hr work = (P+Q+R)’s 1 hr work – (P+Q)’s 1 hr work = 1/12 – 1/21 = 7-4/84 = 3/84 = 1/28 R alone can fill the tank in 28 hrs.

If G is the specific gravity of particles of diameter d, the velocity of settlement V in still water at T°C, according to Stoke's law, is (A) V = 418 (G - 1) d² [(3T + 70)/100] (B) V = 418 (G - 1) d [(3T - 70)/100] (C) V = 418 (G - 1) d² [(2T + 70)/100] (D) V = 418 (G - 1) d 4 [(3T + 70)/100]

Description : If G is the specific gravity of particles of diameter d, the velocity of settlement V in still water  at T°C, according to Stoke's law, is  (A) V = 418 (G - 1) d² [(3T + 70)/100]  (B) V = 418 (G - 1) d [(3T - ... 1) d² [(2T + 70)/100]  (D) V = 418 (G - 1) d 4  [(3T + 70)/100] 

Last Answer : (A) V = 418 (G - 1) d² [(3T + 70)/100] 

1000 kg of wet solids are to be dried from 60% to 20% moisture (by weight). The mass of moisture removed in kg is (A) 520 (B) 200(C) 400 (D) 500

Description : 1000 kg of wet solids are to be dried from 60% to 20% moisture (by weight). The mass of moisture removed in kg is (A) 520 (B) 200 (C) 400 (D) 500

Last Answer : (C) 400

If is specific gravity of sand particles, is porosity, the critically hydraulic gradient (A) ic = (G + 1)/(1 - e) (B) ic = (G + 1)/(1 + e) (C) ic = (G - 1)/(1 + e) (D) ic = (G - 1)/(1 - e)

Description : If is specific gravity of sand particles, is porosity, the critically hydraulic gradient (A) ic = (G + 1)/(1 - e) (B) ic = (G + 1)/(1 + e) (C) ic = (G - 1)/(1 + e) (D) ic = (G - 1)/(1 - e)

Last Answer : Answer: Option C

A soil has a bulk density of 22 kN/m3 and water content 10 %. The dry density of soil is (A) 18.6 kN/m3 (B) 20.0 kN/m3 (C) 22.0 kN/m3 (D) 23.2 kN/m3 Answer: Option

Description : A soil has a bulk density of 22 kN/m3 and water content 10 %. The dry density of soil is (A) 18.6 kN/m3 (B) 20.0 kN/m3 (C) 22.0 kN/m3 (D) 23.2 kN/m3

Last Answer : (B) 20.0 kN/m3

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

Sedimentation analysis is based on the assumption: (A) Soil particles are spherical (B) Particles settle independent of other particles (C) Walls of the jar do not affect the settlement (D) All the above

Description : Sedimentation analysis is based on the assumption: (A) Soil particles are spherical (B) Particles settle independent of other particles (C) Walls of the jar do not affect the settlement (D) All the above

Last Answer : (D) All the above

1275.42 + 8624.6 – 894.54 – 24.71 = ? a) 8620.27 b) 8738.57 c) 8890.93 d) 8980.77 e) 9012.17

Description : 1275.42 + 8624.6 – 894.54 – 24.71 = ? a) 8620.27 b) 8738.57 c) 8890.93 d) 8980.77 e) 9012.17

Last Answer : d) 8980.77

A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Description : A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Last Answer : (D) 1.00

A pycnometer is used to determine (A) Voids ratio (B) Dry density (C) Water content (D) Density index

Description : A pycnometer is used to determine (A) Voids ratio (B) Dry density (C) Water content (D) Density index

Last Answer : (C) Water content

A fundamental equation of void ratio (e), specific gravity (G), water content and degree of saturation (Sr ) is (A) e = /Sr(B) = eG/Sr(C) G = /S(D) Sr = /G

Description : A fundamental equation of void ratio (e), specific gravity (G), water content and degree of saturation (Sr ) is (A) e = /Sr (B) = eG/Sr (C) G = /S (D) Sr = /G

Last Answer : (A) e = /Sr

The cement becomes useless if its absorbed moisture content exceeds (A) 1 % (B) 2 % (C) 3 % (D) 5 %

Description : The cement becomes useless if its absorbed moisture content exceeds (A) 1 % (B) 2 % (C) 3 % (D) 5 %

Last Answer : Answer: Option D

Bulking of sand is maximum if moisture content is about (A) 2 % (B) 4 % (C) 6 % (D) 10 %

Description : Bulking of sand is maximum if moisture content is about (A) 2 % (B) 4 % (C) 6 % (D) 10 %

Last Answer : Answer: Option B

The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %

Description : The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %

Last Answer : Answer: Option B

When a girl weighing 90 kgs left a class, the average weight of the remaining 119 students increased by 400 g. What is the average weight of the remaining 119 students? A) 124 B) 138 C) 145 D) 116

Description : When a girl weighing 90 kgs left a class, the average weight of the remaining 119 students increased by 400 g. What is the average weight of the remaining 119 students? A) 124 B) 138 C) 145 D) 116

Last Answer :  B Let the average weight of the 119 students be X. Therefore, the total weight of the 119 of them will be 119X. The questions states that when the weight of this student who left is added, the total ... , the average weight decreases by 0.4 kgs. (119X+90)/120=X−0.4 ⇒119X+90=120X−48  ⇒X=138