The reaction at the supports will be vertical to the plane of the support if the frame structure rests on (A) Roller supports (B) Free supports (C) Hinged supports (D) All the above

The reaction at the supports will be vertical to the plane of the support if the frame structure rests 

on 

(A) Roller supports 

(B) Free supports 

(C) Hinged supports 

(D) All the above 

by

1 Answer

Answer :

(D) All the above 

by

Related questions

The fixed support in a real beam becomes in the conjugate beam a (A) Roller support (B) Hinged support (C) Fixed support (D) Free end

Description : The fixed support in a real beam becomes in the conjugate beam a (A) Roller support (B) Hinged support (C) Fixed support (D) Free end

Last Answer : (D) Free end

There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be in the ratio of (A) 1 : 1½ : 2 (B) 2 : 1½ : 1 (C) 1 : 1 : 2(D) None of these

Description : There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and  each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be  in the ratio of  (A) 1 ... (B) 2 : 1½ : 1  (C) 1 : 1 : 2 (D) None of these

Last Answer : (C) 1 : 1 : 2 

A three hinged arch is generally hinged at its supports and (A) At one quarter span (B) At the crown (C) Anywhere in the rib (D) None of these

Description : A three hinged arch is generally hinged at its supports and  (A) At one quarter span  (B) At the crown  (C) Anywhere in the rib  (D) None of these 

Last Answer : (C) Anywhere in the rib 

For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Description : For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (B) Is decreased

For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Description : For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg

Description : A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg

Last Answer : (A) 1250 kg

An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of span 2l and rise h hinged at the crown, the horizontal reaction at the support, is (A) Wa/h (B) Wa/2h(C) 2W/ha(D) 2h/W

Description : An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of  span 2l and rise h hinged at the crown, the horizontal reaction at the support, is  (A) Wa/h  (B) Wa/2h (C) 2W/ha (D) 2h/W

Last Answer : (B) Wa/2h

Reactions at the supports of a structure can be determined by equating the algebraic sum of (A) Horizontal forces to zero (B) Vertical forces to zero (C) Moment about any point to zero (D) All the above

Description : Reactions at the supports of a structure can be determined by equating the algebraic sum of (A) Horizontal forces to zero (B) Vertical forces to zero (C) Moment about any point to zero (D) All the above

Last Answer : (D) All the above

Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For hinged condition C. Deep groove ball bearing 3. For pure radial load D. Thrust ball bearing 4. For axial and radial load A B C D A B C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Description : Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For ... C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Last Answer : (c) 2 4 3 1

The vertical faces of a door opening which support frame of the door, are (A) Jambs (B) Posts (C) Reveals (D) Styles

Description : The vertical faces of a door opening which support frame of the door, are (A) Jambs (B) Posts (C) Reveals (D) Styles

Last Answer : Answer: Option A

When loads are applied proportionately to a frame structure containing its members in one plane, the structure is called (A) Grid frame (B) Plane frame (C) Space frame (D) Truss frame

Description : When loads are applied proportionately to a frame structure containing its members in one plane, the structure is called (A) Grid frame (B) Plane frame (C) Space frame (D) Truss frame

Last Answer : (C) Space frame

For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD' and AD' when measured were 4 cm, 3 cm and 5 cm respectively. The angle between the reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90

Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined  and produced to intersect the load line at D and a line parallel to the load line through A at D'.  Distances AD, DD ... reactions at A and B is  (A) 30°  (B) 45°  (C) 60°  (D) 90

Last Answer : (D) 90

A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half left hand span. The horizontal thrust at the support will be (A) 10.8 tonnes (B) 1.08 tonnes (C) 1.8 tonnes (D) 0.8 tonnes

Description : A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m  and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half  left hand span ... A) 10.8 tonnes  (B) 1.08 tonnes  (C) 1.8 tonnes  (D) 0.8 tonnes 

Last Answer : (B) 1.08 tonnes 

In a three hinged arch, the third hinge is generally kept at (A) Crown of the arch (B) Midpoint of the crown and left support hinge (C) Midpoint of the crown and right support hinge (D) None of these

Description : In a three hinged arch, the third hinge is generally kept at  (A) Crown of the arch  (B) Midpoint of the crown and left support hinge  (C) Midpoint of the crown and right support hinge  (D) None of these 

Last Answer : (A) Crown of the arch

A three-hinged arch is said to be: (A) Statically determinate structure (B) Statically indeterminate structure (C) A bent beam (D) None of these

Description : A three-hinged arch is said to be:  (A) Statically determinate structure  (B) Statically indeterminate structure  (C) A bent beam  (D) None of these

Last Answer : (A) Statically determinate structure 

.In a free moment diagram support assumption is a. Simply supported ends b.free free ends c. fixed ends d.hinged ends

Description : .In a free moment diagram support assumption is a. Simply supported ends b.free free ends c. fixed ends d.hinged ends

Last Answer : a. Simply supported ends

Degree of static indeterminacy of a rigid-jointed plane frame having 15 members, 3 reaction components and 14 joints is (A) 2 (B) 3 (C) 6 (D) 8

Description : Degree of static indeterminacy of a rigid-jointed plane frame having 15 members, 3 reaction components and 14 joints is (A) 2 (B) 3 (C) 6 (D) 8

Last Answer : (C) 6

A pin-jointed plane frame is unstable if (A) (m + r) < 2j (B) (m + r) = 2j (C) (m + r) > 2j (D) None of the above Where m is number of members, r is reaction components and j is number of joints

Description : A pin-jointed plane frame is unstable if (A) (m + r) < 2j (B) (m + r) = 2j (C) (m + r) > 2j (D) None of the above Where m is number of members, r is reaction components and j is number of joints

Last Answer : (A) (m + r) < 2j

If there are m unknown member forces, r unknown reaction components and j number of joints, then the degree of static indeterminacy of a pin-jointed plane frame is given by (A) m + r + 2j (B) m - r + 2j (C) m + r - 2j (D) m + r - 3j

Description : If there are m unknown member forces, r unknown reaction components and j number of joints, then the degree of static indeterminacy of a pin-jointed plane frame is given by (A) m + r + 2j (B) m - r + 2j (C) m + r - 2j (D) m + r - 3j

Last Answer : (C) m + r - 2j

A rigid-jointed plane frame is stable and statically determinate if (A) (m + r) = 2j (B) (m + r) = 3j (C) (3m + r) = 3j (D) (m + 3r) = 3j Where m is number of members, r is reaction components and j is number of joints

Description : A rigid-jointed plane frame is stable and statically determinate if (A) (m + r) = 2j (B) (m + r) = 3j (C) (3m + r) = 3j (D) (m + 3r) = 3j Where m is number of members, r is reaction components and j is number of joints

Last Answer : (C) (3m + r) = 3j

The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum reactions on the ground would be a.3.6 tonnes b.2.4 tonnes c.4.0 tonnes d.4.8 tonnes e.4.4 tonnes

Description : The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum ... would be a.3.6 tonnes b.2.4 tonnes c.4.0 tonnes d.4.8 tonnes e.4.4 tonnes

Last Answer : e. 4.4 tonnes

The locus of reaction of a two hinged semi-circular arch, is (A) Straight line (B) Parabola (C) Circle (D) Hyperbola

Description : The locus of reaction of a two hinged semi-circular arch, is  (A) Straight line  (B) Parabola  (C) Circle  (D) Hyperbola 

Last Answer : (A) Straight line 

A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant active earth pressure will act at a distance of 2 m above the base and inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Last Answer : (C) 12°

The term string is used for (A) The underside of a stair (B) Outer projecting edge of a tread (C) A sloping member which supports the steps in a stair (D) A vertical member between two treads

Description : The term string is used for (A) The underside of a stair (B) Outer projecting edge of a tread (C) A sloping member which supports the steps in a stair (D) A vertical member between two treads

Last Answer : Answer: Option C

A block of mass 37 kg rests on a rough horizontal plane having coefficient of static friction 0.3.

Description : A block of mass 37 kg rests on a rough horizontal plane having coefficient of static friction 0.3.

Last Answer : A block of mass 37 kg rests on a rough horizontal plane having coefficient of static friction ... force required to just move the block horizontally.

What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Description : What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Last Answer : E. None of the above

P = /L² is the equation for Euler's crippling load if (A) Both the ends are fixed (B) Both the ends are hinged (C) One end is fixed and other end is free (D) One end is fixed and other end is hinged

Description : P = /L² is the equation for Euler's crippling load if  (A) Both the ends are fixed  (B) Both the ends are hinged  (C) One end is fixed and other end is free  (D) One end is fixed and other end is hinged

Last Answer : (B) Both the ends are hinged

Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (A) One end is fixed and other end is hinged (B) Both ends are hinged or pin jointed (C) One end is fixed and the other end entirely free (D) Both the ends are fixed

Description : Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (A) One end is fixed and other end is hinged (B) Both ... (C) One end is fixed and the other end entirely free (D) Both the ends are fixed

Last Answer : (D) Both the ends are fixed

While designing the pile as a column, the end conditions are nearly (A) Both ends hinged (B) Both ends fixed (C) One end fixed and other end hinged (D) One end fixed and other end free

Description : While designing the pile as a column, the end conditions are nearly (A) Both ends hinged (B) Both ends fixed (C) One end fixed and other end hinged (D) One end fixed and other end free

Last Answer : Answer: Option C

At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Description : At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Last Answer : b. 90?

Pick up the correct statement from the following: (A) The bent up bars at a support resist the negative bending moment (B) The bent up bars at a support resist the sharing force (C) The bending of bars near supports is generally at 45° (D) All the above

Description : Pick up the correct statement from the following: (A) The bent up bars at a support resist the negative bending moment (B) The bent up bars at a support resist the sharing force (C) The bending of bars near supports is generally at 45° (D) All the above

Last Answer : (D) All the above

In the illustrated motor, roller bearings are used because __________. EL-0001 A. of their ability to absorb moderate thrust loads B. they electrically insulate the rotor from the frame reducing cross-currents C. the shafting and end bells do not require as close a tolerance to properly fit this type of bearing D. the clearance between the rotor and stator is generally as close as mechanical tolerance will permit

Description : In the illustrated motor, roller bearings are used because __________. EL-0001 A. of their ability to absorb moderate thrust loads B. they electrically insulate the rotor from the frame reducing ... clearance between the rotor and stator is generally as close as mechanical tolerance will permit

Last Answer : Answer: D

For a beam, if fundamental equations of statics are not sufficient to determine all the reactive forces at the supports, the structure is said to be (A) Determinate (B) Statically determinate (C) Statically indeterminate (D) None of these

Description : For a beam, if fundamental equations of statics are not sufficient to determine all the reactive forces at the supports, the structure is said to be (A) Determinate (B) Statically determinate (C) Statically indeterminate (D) None of these

Last Answer : (C) Statically indeterminate

The arrangement of supporting an existing structure by providing supports underneath, is known as (A) Shoring (B) Underpinning (C) Jacking (D) Piling

Description : The arrangement of supporting an existing structure by providing supports underneath, is known as (A) Shoring (B) Underpinning (C) Jacking (D) Piling

Last Answer : Answer: Option B

Where can I find middle supports for a Vono metal bed frame?

Description : Where can I find middle supports for a Vono metal bed frame?

Last Answer : This seems adjustable enough to have a good chance of fitting any reasonably standard bed frame.

At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (bD)neither (a) nor (b)

Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)

Last Answer : neither (a) nor (b)

The vertical side member of a shutter frame, is known (A) Style (B) Reveal (C) Mullion (D) Post

Description : The vertical side member of a shutter frame, is known (A) Style (B) Reveal (C) Mullion (D) Post

Last Answer : Answer: Option A

Exposed portions of vertical surface at right angles to the door or window frame, are known as (A) Jambs (B) Lintels (C) Reveals (D) Soffit

Description : Exposed portions of vertical surface at right angles to the door or window frame, are known as (A) Jambs (B) Lintels (C) Reveals (D) Soffit

Last Answer : Answer: Option C

The vertical member running through middle of a shutter frame, is (A) Style (B) Reveal (C) Mullion (D) Post

Description : The vertical member running through middle of a shutter frame, is (A) Style (B) Reveal (C) Mullion (D) Post

Last Answer : Answer: Option C

Juice extraction capacity of vertical three roller type bullock down sugercane crusher E. 50-70% F. 70-90% G. 90-100% H. 30-50%

Description : Juice extraction capacity of vertical three roller type bullock down sugercane crusher E. 50-70% F. 70-90% G. 90-100% H. 30-50%

Last Answer : E. 50-70%

Number of unknown internal forces in each member of a rigid jointed plane frame is (A) 1 (B) 2 (C) 3 (D) 6

Description : Number of unknown internal forces in each member of a rigid jointed plane frame is (A) 1 (B) 2 (C) 3 (D) 6

Last Answer : (C) 3

Independent displacement components at each joint of a rigid-jointed plane frame are (A) Three linear movements (B) Two linear movements and one rotation (C) One linear movement and two rotations (D) Three rotations

Description : Independent displacement components at each joint of a rigid-jointed plane frame are (A) Three linear movements (B) Two linear movements and one rotation (C) One linear movement and two rotations (D) Three rotations

Last Answer : (B) Two linear movements and one rotation

Degree of kinematic indeterminacy of a pin-jointed plane frame is given by (A) 2j - r (B) j - 2r (C) 3j - r (D) 2j + r

Description : Degree of kinematic indeterminacy of a pin-jointed plane frame is given by (A) 2j - r (B) j - 2r (C) 3j - r (D) 2j + r

Last Answer : (A) 2j - r

If in a pin-jointed plane frame (m + r) > 2j, then the frame is (A) Stable and statically determinate (B) Stable and statically indeterminate (C) Unstable (D) None of the above

Description : If in a pin-jointed plane frame (m + r) > 2j, then the frame is (A) Stable and statically determinate (B) Stable and statically indeterminate (C) Unstable (D) None of the above

Last Answer : (B) Stable and statically indeterminate

At either end of a plane frame, maximum number of possible transverse shear forces, are (A) One (B) Two (C) Three (D) Four

Description : At either end of a plane frame, maximum number of possible transverse shear forces, are (A) One (B) Two (C) Three (D) Four

Last Answer : (A) One

At either end of a plane frame, maximum number of possible bending moments, are (A) Zero (B) One (C) Two (D) Three

Description : At either end of a plane frame, maximum number of possible bending moments, are (A) Zero (B) One (C) Two (D) Three

Last Answer : (A) Zero

The ratio of crippling loads of a column having both the ends fixed to the column having both the ends hinged, is (A) 1 (B) 2 (C) 3 (D) 4

Description : The ratio of crippling loads of a column having both the ends fixed to the column having both the  ends hinged, is  (A) 1  (B) 2  (C) 3  (D) 4 

Last Answer : (D) 4 

If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit length over the entire span, (A) Horizontal thrust is wl2 /8h (B) S.F. will be zero throughout (C) B.M. will be zero throughout (D) All the above

Description : If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit  length over the entire span,  (A) Horizontal thrust is wl2 /8h (B) S.F. will be zero throughout  (C) B.M. will be zero throughout  (D) All the above 

Last Answer : (D) All the above 

In a three hinged arch, the bending moment will be zero (A) At right hinge only (B) At left hinge only (C) At both right and left hinges (D) At all the three hinges

Description : In a three hinged arch, the bending moment will be zero (A) At right hinge only (B) At left hinge only (C) At both right and left hinges (D) At all the three hinges

Last Answer : (D) At all the three hinges

Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Description : Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Last Answer : (A) P = ²EI/l²