An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of
span 2l and rise h hinged at the crown, the horizontal reaction at the support, is
(A) Wa/h
(B) Wa/2h
(C) 2W/ha
(D) 2h/W
Description : A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half left hand span ... A) 10.8 tonnes (B) 1.08 tonnes (C) 1.8 tonnes (D) 0.8 tonnes
Last Answer : (B) 1.08 tonnes
Description : If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit length over the entire span, (A) Horizontal thrust is wl2 /8h (B) S.F. will be zero throughout (C) B.M. will be zero throughout (D) All the above
Last Answer : (D) All the above
Description : A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg
Last Answer : (A) 1250 kg
Description : The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with a uniformly distributed load l t per horizontal length is (where Ic is the M.I. at the crown, which varies as the slope ... arch). (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E
Last Answer : (D) 200/E
Description : In a three hinged arch, the third hinge is generally kept at (A) Crown of the arch (B) Midpoint of the crown and left support hinge (C) Midpoint of the crown and right support hinge (D) None of these
Last Answer : (A) Crown of the arch
Description : The equation of a parabolic arch of span and rise , is given by (A) y = h/l² × (1 - x) (B) y = 2h/l² × (1 - x) (C) y = 3h/l² × (1 - x) (D) y = 4h/l² × (1 - x)
Last Answer : (D) y = 4h/l² × (1 - x)
Description : A three hinged arch is generally hinged at its supports and (A) At one quarter span (B) At the crown (C) Anywhere in the rib (D) None of these
Last Answer : (C) Anywhere in the rib
Description : The vertical reaction for the arch is (A) wa/2l (B) wl/a (C) wa/l (D) wa²/2
Last Answer : (A) wa/2l
Description : If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment
Last Answer : (A) Compressive force
Description : In a three hinged arch, the shear force is usually (A) Maximum at crown (B) Maximum at springing (C) Maximum at quarter points (D) Varies with slope
Last Answer : (B) Maximum at springing
Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD ... reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90
Last Answer : (D) 90
Description : For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero
Last Answer : (B) Is decreased
Description : For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero
Last Answer : (C) Remains unchanged
Description : In a three hinged arch, the bending moment will be zero (A) At right hinge only (B) At left hinge only (C) At both right and left hinges (D) At all the three hinges
Last Answer : (D) At all the three hinges
Description : There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be in the ratio of (A) 1 ... (B) 2 : 1½ : 1 (C) 1 : 1 : 2 (D) None of these
Last Answer : (C) 1 : 1 : 2
Description : The rise of a parabolic arch at quarter points, is equal to (A) 1/3 times the rise of the crown (B) 1/4 times the rise of the crown (C) 1/2 times the rise of the crown (D) 3/4 times the rise of the crown
Last Answer : (D) 3/4 times the rise of the crown
Description : The triangular space formed between the extrados and the horizontal line drawn through the crown of an arch is known as (A) Haunch (B) Spandril (C) Voussoirs (D) Skewbacks
Last Answer : Answer: Option B
Description : The locus of reaction of a two hinged semi-circular arch, is (A) Straight line (B) Parabola (C) Circle (D) Hyperbola
Last Answer : (A) Straight line
Description : The general expression for the B.M. of a beam of length l is the beam carries M = (wl/2) x - (wx²/2) (A) A uniformly distributed load w/unit length (B) A load varying linearly from zero at one end to w at the other end (C) An isolated load at mid span (D) None of these
Last Answer : (A) A uniformly distributed load w/unit length
Description : A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the ... (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²
Last Answer : (C) (L/2d)
Description : In jack arch floor, the rise is kept (A) 1/6th of the span (B) 1/8th of the span (C) 1/10th of the span (D) 1/12th of the span
Last Answer : Answer: Option D
Description : A three-hinged arch is said to be: (A) Statically determinate structure (B) Statically indeterminate structure (C) A bent beam (D) None of these
Last Answer : (A) Statically determinate structure
Description : If is the difference in level between end points separated by , then the slope correction is [(h²/2l) + (h 4 /8l3 )]. The second term may be neglected if the value of in a 20 m distance is less than (A) ½ m (B) 1 m (C) 2 m (D) 3 m
Last Answer : (D) 3 m
Description : The depth of an arch is the distance between (A) Ground level and springing line (B) Crown and springing line (C) Crown and ground level (D) Intrados and extrados
Description : A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be a.Zero b.W c.W/2 d.2W e.None of the above
Last Answer : c. W/2
Description : Maximum deflection in a S.S beam with UDL w over the entire span will be a. at the left hand support. b.at the right support. c. at the centre. d.none.
Last Answer : c. at the centre.
Description : A concentrated load P acts on a simply supported beam of span L at a distance L/3 from the left support. The bending moment at the point of application of the load is given by (a) PL/3 (b) 2PL/3 (c) PL/9 (d) 2PL/9
Last Answer : (d) 2PL/9
Description : Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of (A) h/4 (B) h/3 (C) h/2 (D) 2h/3
Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall acts at a distance __________ from the liquid surface. (A) H/3 (B) H/2 (C) 2H/3 (D) 3H/4
Last Answer : Answer: Option C
Description : The ratio of the deflections of the free end of a cantilever due to an isolated load at 1/3rd and 2/3rd of the span, is (A) 1/7 (B) 2/7 (C) 3/7 (D) 2/5
Last Answer : (B) 2/7
Description : The maximum deflection of a simply supported beam of span L, carrying an isolated load at the centre of the span; flexural rigidity being EI, is (A) WL3 /3EL (B) WL3 /8EL (C) WL3 /24EL (D) WL3 /48EL
Last Answer : (D) WL3 /48EL
Description : If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured ... ) Kx (1 - x/l) + bw (C) Kx (1 + x/l) + bw (D) All the above
Description : The vertical distance between the springing line and highest point of the inner curve of an arch is known as (A) Intrados (B) Rise (C) Spandril (D) Extrados
Description : If a bent tendon is required to balance a concentrated load W at the centre of the span L, the central dip h must be at least (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P
Description : If T and R are the tread and rise of a stair which carries a load w per square metre on slope, the corresponding load per square metre of the horizontal area, is (A) w (R + T)/T (B) w (R² + T²)/T (C) w (R + T)/T (D) w (R/T)
Description : The reaction at the supports will be vertical to the plane of the support if the frame structure rests on (A) Roller supports (B) Free supports (C) Hinged supports (D) All the above
Description : If is the difference in height between end points of a chain of length , the required slope correction is (A) h²/2l (B) h/2l (C) h²/l (D) 2h²/2l
Last Answer : (A) h²/2l
Description : According to Rankine's formula, minimum depth of foundations, is (A) (P/w) × [(1 + sin )/(1 - )]² (B) (P/w) × [(1 - sin )/(1 + )]² (C) (P/2w) × [(1 - sin )/(1 + )]² (D) (P/w) × [(1 + sin )/(1 - )]
Description : Crown is located at (A) Highest point on the extrados of the arch (B) Highest point on the intrados of the arch (C) Skew-back of the arch (D) None of these
Last Answer : Answer: Option A
Description : The voussoir placed at crown of an arch, is known as a (A) Key (B) Soffit (C) Springer (D) Haunch
Description : The lower half portion between crown and skew back of the arch, is called (A) Spandril (B) Haunch (C) Springing (D) Soffit
Description : Identify the products in the following disproportional reaction and also mention rate determining step. `2H-overset(D)overset(|)(C)=O + overset(@)(O)H
Last Answer : Identify the products in the following disproportional reaction and also mention rate determining step. `2H-overset ... ")+underset("(Q)")("Alcohol")`
Description : The lintels are preferred to arches because (A) Arches require more headroom to span the openings like doors, windows etc. (B) Arches require strong abutments to withstand arch thrust (C) Arches are difficult in construction (D) All of the above
Description : When four resistances of 2W 1W; 5W 2W; 10W 5W and 15W 10 W are connected in parallel, the greatest power is absorbed by • 2 W, 1 W • 5 W, 2 W • 10 W, 5W • 15 W, 10 W
Last Answer : When four resistances of 2W 1W; 5W 2W; 10W 5W and 15W 10 W are connected in parallel, the greatest power is absorbed by 2 W, 1 W
Description : The fixed support in a real beam becomes in the conjugate beam a (A) Roller support (B) Hinged support (C) Fixed support (D) Free end
Last Answer : (D) Free end
Description : P = /L² is the equation for Euler's crippling load if (A) Both the ends are fixed (B) Both the ends are hinged (C) One end is fixed and other end is free (D) One end is fixed and other end is hinged
Last Answer : (B) Both the ends are hinged
Description : Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l
Last Answer : (A) P = ²EI/l²
Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0
Last Answer : (B) 12.88
Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.
Last Answer : (d) All of the above.