A solid cube is subjected to equal normal forces on all its faces. The volumetric strain will be x- times the linear strain in any of the three axes when (A) x = 1 (B) x = 2 (C) x = 3 (D) x = 4

A solid cube is subjected to equal normal forces on all its faces. The volumetric strain will be x- times the linear strain in any of the three axes when
(A) x = 1
(B) x = 2
(C) x = 3
(D) x = 4
by

1 Answer

Answer :

(C) x = 3
by

Related questions

Bulk modulus of elasticity is a. Tensile stress / Tensile strain b. Shear stress / Shear strain c. Tensile stress / Shear strain d. Normal stress on each face of cube / Volumetric strain

Description : Bulk modulus of elasticity is a. Tensile stress / Tensile strain b. Shear stress / Shear strain c. Tensile stress / Shear strain d. Normal stress on each face of cube / Volumetric strain

Last Answer : d. Normal stress on each face of cube / Volumetric strain

The total strain energy for a unit cube subjected to three principal stresses is given by? a) U= [(σέ) 1 + (σέ) 2+ (σέ) 3]/3 b) U= [(σ12+σ22+σ32)/2E] – (σ1σ2+σ2σ3+σ3σ1)2μ c) U= [(σέ) 1 + (σέ) 2+ (σέ) 3]/4 d) None of the mentioned

Description : The total strain energy for a unit cube subjected to three principal stresses is given by? a) U= [(σέ) 1 + (σέ) 2+ (σέ) 3]/3 b) U= [(σ12+σ22+σ32)/2E] – (σ1σ2+σ2σ3+σ3σ1)2μ c) U= [(σέ) 1 + (σέ) 2+ (σέ) 3]/4 d) None of the mentioned

Last Answer : b) U= [(σ12+σ22+σ32)/2E] – (σ1σ2+σ2σ3+σ3σ1)2μ

Pick up the correct statement from the following: (A) Hoop strain of the walls of a cylinder due to liquid is (pd/2tE) (1 - 1/2m) (B) Longitudinal strain in the walls of a cylinder due to liquid is (pd/2tE) (1/2 - 1/m) (C) Volumetric change in the cylinder due to liquid is (pd/2tE) (5/2 - 2/m) (D) All the above

Description : Pick up the correct statement from the following:  (A) Hoop strain of the walls of a cylinder due to liquid is (pd/2tE) (1 - 1/2m)  (B) Longitudinal strain in the walls of a cylinder due to liquid is ... change in the cylinder due to liquid is (pd/2tE) (5/2 - 2/m)  (D) All the above 

Last Answer : (D) All the above 

The strain energy due to volumetric strain (A) Is directly proportional to the volume (B) Is directly proportional to the square of exerted pressure (C) Is inversely proportional to Bulk modulus (D) All the above

Description : The strain energy due to volumetric strain  (A) Is directly proportional to the volume  (B) Is directly proportional to the square of exerted pressure  (C) Is inversely proportional to Bulk modulus  (D) All the above 

Last Answer : (D) All the above 

If a circular beam of diameter d experiences a longitudinal strain P/E and a lateral strain 2P/mE, the volumetric strain is (A) (P/E) + (2P/mE) (B) (P/E) - (2P/mE) (C) (P/E) + (mE/2P) (D) (P/E) - (mE/2P)

Description : If a circular beam of diameter d experiences a longitudinal strain P/E and a lateral strain 2P/mE, the volumetric strain is (A) (P/E) + (2P/mE) (B) (P/E) - (2P/mE) (C) (P/E) + (mE/2P) (D) (P/E) - (mE/2P)

Last Answer : (B) (P/E) - (2P/mE)

Bulk modulus of a fluid is the ratio of (A) Shear stress to shear strain (B) Increase in volume to the viscosity of fluid (C) Increase in pressure to the volumetric strain (D) Critical velocity to the viscosity of fluid

Description : Bulk modulus of a fluid is the ratio of (A) Shear stress to shear strain (B) Increase in volume to the viscosity of fluid (C) Increase in pressure to the volumetric strain (D) Critical velocity to the viscosity of fluid

Last Answer : Answer: Option C

The volumetric change of the fluid caused by a resistance is known as (A) Volumetric strain (B) Volumetric index (C) Compressibility (D) Adhesion

Description : The volumetric change of the fluid caused by a resistance is known as (A) Volumetric strain (B) Volumetric index (C) Compressibility (D) Adhesion

Last Answer : Answer: Option C

A joint of a frame is subjected to three tensile forces P, Q and R equally inclined to each other. If P is 10 tonnes, the other forces will be (A) Q = 10 tonnes and R = zero (B) R + 10 tonnes and Q = zero (C) Q + R = 10 tonnes (D) Q and R each is equal to 10 tonnes

Description : A joint of a frame is subjected to three tensile forces P, Q and R equally inclined to each other. If P is 10 tonnes, the other forces will be (A) Q = 10 tonnes and R = zero (B) R + 10 tonnes and Q = zero (C) Q + R = 10 tonnes (D) Q and R each is equal to 10 tonnes

Last Answer : (D) Q and R each is equal to 10 tonnes

A cuboid shaped wooden block has 6 cm length, 4 cm breadth and 1 cm height. 2. Two faces measuring 4 cm x 1 cm are coloured in black. 3. Two faces measuring 6 cm x 1 cm are coloured in red. 4. Two faces measuring 6 cm x 4 cm are coloured in green. 5. The block is divided into 6 equal cubes of side 1 cm (from 6 cm side), 4 equal cubes of side 1 cm(from 4 cm side). How many cubes having red, green and black colours on at least one side of the cube will be formed?

Description : A cuboid shaped wooden block has 6 cm length, 4 cm breadth and 1 cm height. 2. Two faces measuring 4 cm x 1 cm are coloured in black. 3. Two faces measuring 6 cm x 1 cm are coloured in red. 4. Two faces ... and black colours on at least one side of the cube will be formed? (a)16 (b)12 (c)10 (d)4

Last Answer : Answer key : (d)

A solid circular shaft of diameter d is subjected to a torque T. The maximum normal stress induced in the shaft, is (A) Zero (B) 16T/ 3 (C) 32T/ 3 (D) None of these

Description : A solid circular shaft of diameter d is subjected to a torque T. The maximum normal stress induced  in the shaft, is  (A) Zero  (B) 16T/ 3 (C) 32T/ 3 (D) None of these

Last Answer : (B) 16T/ 3

Compute the charge enclosed by a cube of 2m each edge centered at the origin and with the edges parallel to the axes. Given D = 10y 3 /3 j. a) 20 b) 70/3 c) 80/3 d) 30

Description : Compute the charge enclosed by a cube of 2m each edge centered at the origin and with the edges parallel to the axes. Given D = 10y 3 /3 j. a) 20 b) 70/3 c) 80/3 d) 30

Last Answer : c) 80/3

A bar L metre long and having its area of cross-section A, is subjected to a gradually applied tensile load W. The strain energy stored in the bar is (A) WL/2AE (B) WL/AE (C) W²L/AE (D) W²L/2AE

Description : A bar L metre long and having its area of cross-section A, is subjected to a gradually applied tensile  load W. The strain energy stored in the bar is  (A) WL/2AE (B) WL/AE (C) W²L/AE (D) W²L/2AE

Last Answer : (D) W²L/2AE

The ratio of stress to volumetric strain is called a) Shear Modulus b) Young’s Modulus c) Bulk Modulus d) Modulus of elasticity

Description : The ratio of stress to volumetric strain is called a) Shear Modulus b) Young’s Modulus c) Bulk Modulus d) Modulus of elasticity

Last Answer : c) Bulk Modulus

The volumetric strain is: a) V/Vo b) Vo/V c) V/t d) None

Description : The volumetric strain is: a) V/Vo b) Vo/V c) V/t d) None

Last Answer : a) V/Vo

The strain due to tensile stress is : a) Compressive strain b) Shear strain c) Volumetric strain d) Tensile strain

Description : The strain due to tensile stress is : a) Compressive strain b) Shear strain c) Volumetric strain d) Tensile strain

Last Answer : d) Tensile strain

Poisson’s ratio is a. Lateral strain / Longitudinal strain b. Shear strain / Lateral strain c. Longitudinal strain / Lateral strain d. Lateral strain / Volumetric strain

Description : Poisson’s ratio is a. Lateral strain / Longitudinal strain b. Shear strain / Lateral strain c. Longitudinal strain / Lateral strain d. Lateral strain / Volumetric strain

Last Answer : a. Lateral strain / Longitudinal strain

Volumetric Strain is (a)Increase in length / original length (b)Decrease in length / original length (c)Change in volume / original volume (d)All of the above

Description : Volumetric Strain is (a)Increase in length / original length (b)Decrease in length / original length (c)Change in volume / original volume (d)All of the above

Last Answer : C is correct

Define volumetric strain. Also give the relation between lateral strain to and Poisson’s ratio.

Description : Define volumetric strain. Also give the relation between lateral strain to and Poisson’s ratio. 

Last Answer : Volumetric strain: Volumetric strain is defined as the ratio of change in volume to original volume.

Find the point on the curve `9y^2=x^3,` where the normal to the curve makes equal intercepts on the axes.

Description : Find the point on the curve `9y^2=x^3,` where the normal to the curve makes equal intercepts on the axes.

Last Answer : Find the point on the curve `9y^2=x^3,` where the normal to the curve makes equal intercepts on the axes. A. `(3, ... `(3, pm 8/3)` D. `(4, pm 3/8)`

Find the point on the curve `9y^2=x^3,` where the normal to the curve makes equal intercepts on the axes.

Description : Find the point on the curve `9y^2=x^3,` where the normal to the curve makes equal intercepts on the axes.

Last Answer : Find the point on the curve `9y^2=x^3,` where the normal to the curve makes equal intercepts on the axes.

The resultant of two forces 10 N and 15 N acting along + x and – x-axes respectively, is

Description : The resultant of two forces 10 N and 15 N acting along + x and – x-axes respectively, is

Last Answer : The resultant of two forces 10 N and 15 N acting along + x and - x-axes respectively, is (A) 25 N along ... along + x-axis (D) 5 N along - x-axis

Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Description : Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Last Answer : b.Parallel

If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque when t attains maximum shear stress fs the ratio of inner diameter to outer diameter, is 17/64 (fs/N) (A) 1/2 (B) 1/3 (C) 1/4 (D) 1/5

Description : If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque  when t attains maximum shear stress fs  the ratio of inner diameter to outer diameter, is 17/64  (fs/N)  (A) 1/2  (B) 1/3  (C) 1/4  (D) 1/5

Last Answer : (C) 1/4 

The strain energy stored in a spring when subjected to greatest load without being permanently distorted, is called (A) Stiffness (B) Proof resilience (C) Proof stress (D) Proof load

Description : The strain energy stored in a spring when subjected to greatest load without being permanently  distorted, is called  (A) Stiffness  (B) Proof resilience  (C) Proof stress  (D) Proof load

Last Answer : (B) Proof resilience 

An open-ended cylinder of radius and thickness is subjected to internal pressure . The Young's modulus for the material is and Poisson's ratio is . The longitudinal strain is (A) Zero (B) pr/TE (C) pr/2TE (D) None of these

Description : An open-ended cylinder of radius and thickness is subjected to internal pressure . The Young's modulus for the material is and Poisson's ratio is . The longitudinal strain is (A) Zero (B) pr/TE (C) pr/2TE (D) None of these

Last Answer : (A) Zero

cylindrical rod subjected to a tensile strain within the elastic limit undergoes a volume change. If the volume strain is equal to half the tensile strain, then the Poisson's ratio of the rod is (A) 0 (B) 0.33 (C) 0.44 (D) 0.25

Description : cylindrical rod subjected to a tensile strain within the elastic limit undergoes a volume change. If the volume strain is equal to half the tensile strain, then the Poisson's ratio of the rod is (A) 0 (B) 0.33 (C) 0.44 (D) 0.25

Last Answer : Option C

Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil each attaining the bath temperature eventually. The time required for 90% change in temperature is the smallest for (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Description : Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil ... (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Last Answer : (A) Cube

Consider a cube of material of sides 1 cm with a resistance of 0.003 Ω between its opposite faces. What is the

Description : Consider a cube of material of sides 1 cm with a resistance of 0.003 Ω between its opposite faces. What is the resistance if the same volume of the material is drawn into a length of 50 cm with a uniform cross – section? A) 0.003 Ω B) 0.15 Ω C) 7.5 Ω D) None of these

Last Answer : Consider a cube of material of sides 1 cm with a resistance of 0.003 Ω between its opposite faces. What is the resistance if the same volume of the material is drawn into a length of 50 cm with a uniform cross – section? A) 0.003 Ω B) 0.15 Ω C) 7.5 Ω D) None of these

Fluid is a substance that (A) Cannot be subjected to shear forces (B) Always expands until it fills any container (C) Has the same shear stress at a point regardless of its motion (D) Cannot remain at rest under action of any shear force

Description : Fluid is a substance that (A) Cannot be subjected to shear forces (B) Always expands until it fills any container (C) Has the same shear stress at a point regardless of its motion (D) Cannot remain at rest under action of any shear force

Last Answer : Answer: Option D

Did you know that the diagonals of the faces of a cube can be joined to form the framework of a tetrahedron?

Description : Did you know that the diagonals of the faces of a cube can be joined to form the framework of a tetrahedron?

Last Answer : I just drew it. Amasing!

A cylinder is within the cube touching all the vertical faces. A cone is inside the cylinder. If their heights are same with -Maths 9th

Description : A cylinder is within the cube touching all the vertical faces. A cone is inside the cylinder. If their heights are same with -Maths 9th

Last Answer : answer:

When cube one of the (five) Platonic solids. Name the other Platonic solids and describe the characteristics of each. How many faces does it have What shape are the faces How many faces come together?

Description : When cube one of the (five) Platonic solids. Name the other Platonic solids and describe the characteristics of each. How many faces does it have What shape are the faces How many faces come together?

Last Answer : Tetrahedron 3 triangles meet at each vertex 4 Faces 4 Vertices 6 Edges Cube 3 squares meet at each vertex 6 Faces 8 Vertices 12 Edges Octahedron 4 triangles meet at each vertex 8 Faces 6 ... Faces 20 Vertices 30 Edges Icosahedron 5 triangles meet at each vertex 20 Faces 12 Vertices 30 Edges

All the six faces of a cube of a cube are coloured with six different colours - black, brown, green, red, white and blue. 1. Red face is opposite to the black face. 2. Green face is between red and black faces. 3. Blue face is adjacent to white face. 4. Brown face is adjacent to blue face. 5. Red face is in the bottom. Which face is opposite to green ? (a)Red (b)white (c) blue (d)brown

Description : All the six faces of a cube of a cube are coloured with six different colours - black, brown, green, red, white and blue. 1. Red face is opposite to the black face. 2. Green face is between red and black ... face is in the bottom. Which face is opposite to green ? (a)Red (b)white (c) blue (d)brown

Last Answer : (c) blue

All the six faces of a cube of a cube are coloured with six different colours - black, brown, green, red, white and blue. 1. Red face is opposite to the black face. 2. Green face is between red and black faces. 3. Blue face is adjacent to white face. 4. Brown face is adjacent to blue face. 5. Red face is in the bottom. Which of the following is adjacent to green ? (a) Black, white, brown, red (b) Blue, black, red, white (c) Red, black, blue, white (d) None of these

Description : All the six faces of a cube of a cube are coloured with six different colours - black, brown, green, red, white and blue. 1. Red face is opposite to the black face. 2. Green face is between red and black faces ... , brown, red (b) Blue, black, red, white (c) Red, black, blue, white (d) None of these

Last Answer : (a) Black, white, brown, red

How many ways is it possible to color the faces of a six sided black cube white? ( This is a neat "critical thinking" problem because it makes you re-think how you might 'normally' think of a cube.)

Description : How many ways is it possible to color the faces of a six sided black cube white? ( This is a neat "critical thinking" problem because it makes you re-think how you might 'normally' think of a cube.)

Last Answer : Eleven

The resistance between the opposite faces of 1m. cube is found to be 1Ω...

Description : The resistance between the opposite faces of 1m. cube is found to be 1Ω . If its length is increased to 2 m, with its volume remaining the same, then its resistance between the opposite faces along its length is : (A) 2 Ω (B) 4 Ω (C) 1 Ω (D) 8 Ω

Last Answer : 4 ohms

53. While plotting constraints on a graph paper, terminal points on both the axes are connected by straight line because a. The resources are limited in supply b. The objective function as a linear function c. The constraints are linear equations or inequalities d. All of the above

Description : 53. While plotting constraints on a graph paper, terminal points on both the axes are connected by straight line because a. The resources are limited in supply b. The objective function as a linear function c. The constraints are linear equations or inequalities d. All of the above

Last Answer : c. The constraints are linear equations or inequalities

A liquid would wet the solid, if adhesion forces as compared to cohesion forces are (A) Less (B) More (C) Equal (D) Less at low temperature and more at high temperature

Description : A liquid would wet the solid, if adhesion forces as compared to cohesion forces are (A) Less (B) More (C) Equal (D) Less at low temperature and more at high temperature

Last Answer : Answer: Option B

The stress-strain relation of the Newtonian fluid is (A) Linear (B) Parabolic (C) Hyperbolic (D) Inverse type

Description : The stress-strain relation of the Newtonian fluid is (A) Linear (B) Parabolic (C) Hyperbolic (D) Inverse type

Last Answer : Answer: Option A

In a R.C section under flexure, the assumption that “a plane section before bending remains plane after bending” leads to (a) Strain distribution being linear across the depth (b) Stress distribution being linear across the depth (c) Both stress and strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Description : In a R.C section under flexure, the assumption that a plane section before bending remains plane after bending leads to (a) Strain distribution being linear across the depth (b) ... strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Last Answer : (a) Strain distribution being linear across the depth

The center of pressure of a surface subjected to fluid pressure is the point (A) On the surface at which resultant pressure acts (B) On the surface at which gravitational force acts (C) At which all hydraulic forces meet (D) Similar to metacentre

Description : The center of pressure of a surface subjected to fluid pressure is the point (A) On the surface at which resultant pressure acts (B) On the surface at which gravitational force acts (C) At which all hydraulic forces meet (D) Similar to metacentre

Last Answer : Answer: Option A

The maximum longitudinal pitch in bolted joints, subjected to tensile forces, wherein t = thickness of the plate and D = diameter of bolt, is (a) 32 D (b) 16 D (c) 32 t (d) 16 t

Description : The maximum longitudinal pitch in bolted joints, subjected to tensile forces, wherein t = thickness of the plate and D = diameter of bolt, is (a) 32 D (b) 16 D (c) 32 t (d) 16 t

Last Answer : (d) 16 t

When a section is subjected to two equal and opposite forces tangentially to the section, the stress produced is known as (a) Tensile stress (b) Lateral stress (c) Shear stress (d) No stress

Description : When a section is subjected to two equal and opposite forces tangentially to the section, the stress produced is known as (a) Tensile stress (b) Lateral stress (c) Shear stress (d) No stress

Last Answer : (c) Shear stress

Four solid cubes of different metals, each one having a mass of one kg are weighed in water select the correct statement: (a) all cubes weigh equal (b) cube with minimum density weighs minimum (c) cube with minimum density weighs maximum (d) the mass of all cubes will be the same

Description : Four solid cubes of different metals, each one having a mass of one kg are weighed in water select the correct statement: (a) all cubes weigh equal (b) cube with minimum density weighs minimum (c) cube with minimum density weighs maximum (d) the mass of all cubes will be the same

Last Answer : Ans:(b)

When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Description : When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Last Answer : a.plane stress

In distortion energy theorem, if a unit cube is subjected to biaxial stress, then S(yt) is given by which of the following? a) √ (σ12- σ1σ2 +σ22) b) σ12- σ1σ2 +σ22 c) √ (σ12+ σ1σ2 +σ22) d) σ12+ σ1σ2 +σ22

Description : In distortion energy theorem, if a unit cube is subjected to biaxial stress, then S(yt) is given by which of the following? a) √ (σ12- σ1σ2 +σ22) b) σ12- σ1σ2 +σ22 c) √ (σ12+ σ1σ2 +σ22) d) σ12+ σ1σ2 +σ22

Last Answer : a) √ (σ12- σ1σ2 +σ22)

In distortion energy theorem, if a unit cube is subjected to biaxial stress, then S(yt) is given by which of the following? a) √ (σ12- σ1σ2 +σ22) b) σ12- σ1σ2 +σ22 c) √ (σ12+ σ1σ2 +σ22) d) σ12+ σ1σ2 +σ22

Description : In distortion energy theorem, if a unit cube is subjected to biaxial stress, then S(yt) is given by which of the following? a) √ (σ12- σ1σ2 +σ22) b) σ12- σ1σ2 +σ22 c) √ (σ12+ σ1σ2 +σ22) d) σ12+ σ1σ2 +σ22

Last Answer : a) √ (σ12- σ1σ2 +σ22)

If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105 N/mm2 ) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is (A) 0.001 (B) 0.002 (C) 0.0025 (D) 0.003

Description : If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105  N/mm2 ) when subjected to a twisting  moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is  (A) 0.001  (B) 0.002  (C) 0.0025  (D) 0.003 

Last Answer : (C) 0.0025 

When a gas or a liquid is subjected to an increased pressure, the substance contracts, the bulk strain is defined as A. final volume ⁄ original volume B. final pressure ⁄ original pressureC. change in volume ⁄ original volumeD. original volume ⁄ change in volume

Description : When a gas or a liquid is subjected to an increased pressure, the substance contracts, the bulk strain is defined as A. final volume ⁄ original volume B. final pressure ⁄ original pressure C. change in volume ⁄ original volume D. original volume ⁄ change in volume

Last Answer : change in volume ⁄ original volume

Due to constant use both inlet and exhaust valves and their seats subjected to a) stress wear b) strain wear c) mechanical wear d) tensile wear

Description : Due to constant use both inlet and exhaust valves and their seats subjected to a) stress wear b) strain wear c) mechanical wear d) tensile wear

Last Answer : c) mechanical wear