A liquid would wet the solid, if adhesion forces as compared to cohesion forces are (A) Less (B) More (C) Equal (D) Less at low temperature and more at high temperature

A liquid would wet the solid, if adhesion forces as compared to cohesion forces are
(A) Less
(B) More
(C) Equal
(D) Less at low temperature and more at high temperature
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The mercury does not wet the glass. This is due to the property of the liquid known as (A) Cohesion (B) Adhesion (C) Viscosity (D) Surface tension

Description : The mercury does not wet the glass. This is due to the property of the liquid known as (A) Cohesion (B) Adhesion (C) Viscosity (D) Surface tension

Last Answer : Answer: Option D

Mercury does not wet glass. This is due to property of liquid known as (A) Adhesion (B) Cohesion (C) Surface tension (D) Viscosity

Description : Mercury does not wet glass. This is due to property of liquid known as (A) Adhesion (B) Cohesion (C) Surface tension (D) Viscosity

Last Answer : Answer: Option C

Capillary action is due to the (A) Surface tension (B) Cohesion of the liquid (C) Adhesion of the liquid molecules and the molecules on the surface of a solid (D) All of the above

Description : Capillary action is due to the (A) Surface tension (B) Cohesion of the liquid (C) Adhesion of the liquid molecules and the molecules on the surface of a solid (D) All of the above

Last Answer : Answer: Option D

Free surface of a liquid behaves like a sheet and tends to contract to smallest possible area due to the (A) Force of adhesion (B) Force of cohesion (C) Force of friction (D) Force of diffusion

Description : Free surface of a liquid behaves like a sheet and tends to contract to smallest possible area due to the (A) Force of adhesion (B) Force of cohesion (C) Force of friction (D) Force of diffusion

Last Answer : Answer: Option B

The tendency of a liquid surface to contract is due to the following property (A) Cohesion (B) Adhesion (C) Viscosity (D) Surface tension

Description : The tendency of a liquid surface to contract is due to the following property (A) Cohesion (B) Adhesion (C) Viscosity (D) Surface tension

Last Answer : Answer: Option D

If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be(A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Description : If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be (A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Last Answer : Answer: Option C

The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Description : The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Last Answer : (A) Surface tension

The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Description : The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Last Answer : (A) Surface tension

Surface energy per unit area of a surface is numerically equal to (A) Atmospheric pressure (B) Surface tension (C) Force of adhesion (D) Force of cohesion

Description : Surface energy per unit area of a surface is numerically equal to (A) Atmospheric pressure (B) Surface tension (C) Force of adhesion (D) Force of cohesion

Last Answer : Answer: Option B

A solid needle placed horizontally on the surface of the water floats due to (a) Surface tension (b) Capillary action (c) Cohesion (d) Adhesion

Description : A solid needle placed horizontally on the surface of the water floats due to (a) Surface tension (b) Capillary action (c) Cohesion (d) Adhesion

Last Answer : Ans:(a)

Rise of liquid in a capillary tube is due to (A) Cohesion (B) Adhesion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Rise of liquid in a capillary tube is due to (A) Cohesion (B) Adhesion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B

The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the structural relation to displacement of the soil because of the interlocking of the particles (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Description : The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the ... (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Last Answer : Answer: Option D

Property of a fluid by which its own molecules are attracted is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Description : Property of a fluid by which its own molecules are attracted is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Last Answer : Answer: Option B

Falling drops of water become spheres due to the property of (A) Adhesion (B) Cohesion (C) Surface tension (D) Viscosity

Description : Falling drops of water become spheres due to the property of (A) Adhesion (B) Cohesion (C) Surface tension (D) Viscosity

Last Answer : Answer: Option C

Property of a fluid by which molecules of different kinds of fluids are attracted to each other is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Description : Property of a fluid by which molecules of different kinds of fluids are attracted to each other is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Last Answer : Answer: Option A

The property of a fluid which enables it to resist tensile stress is known as (A) Compressibility (B) Surface tension (C) Cohesion (D) Adhesion

Description : The property of a fluid which enables it to resist tensile stress is known as (A) Compressibility (B) Surface tension (C) Cohesion (D) Adhesion

Last Answer : Answer: Option C

The property of fluid by virtue of which it offers resistance to shear is called (A) Surface tension (B) Adhesion (C) Cohesion (D) Viscosity

Description : The property of fluid by virtue of which it offers resistance to shear is called (A) Surface tension (B) Adhesion (C) Cohesion (D) Viscosity

Last Answer : Answer: Option D

Surface tension of a liquid (A) Is due to intermolecular forces of cohesion (B) Decreases with rise in temperature (C) Is responsible for the spherical shape of an isolated liquid drop (D) All (A), (B) & (C)

Description : Surface tension of a liquid (A) Is due to intermolecular forces of cohesion (B) Decreases with rise in temperature (C) Is responsible for the spherical shape of an isolated liquid drop (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Cohesion and adhesion in the ascent of xylem sap. -Biology

Description : Cohesion and adhesion in the ascent of xylem sap. -Biology

Last Answer : answer:

How adhesion and cohesion and capillary action enable water to go from the roots to the top a tall tree?

Description : How adhesion and cohesion and capillary action enable water to go from the roots to the top a tall tree?

Last Answer : Water travels up a tree through small tubes called xylem. Aswater is released through the leaves of the tree, it creates anegative pressure at the top of the tree. Even though the weight ofall ... the width of thetube, which means that the xylem and stomata can draw water up andincredible distance.

On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (a) Mercury is a metal (b) The density of mercury is greater than that of water (c) The cohesion of mercury is greater than its adhesion with glass (d) The cohesion of water is greater than its adhesion with glass

Description : On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (a) Mercury is a metal (b) The density of mercury is greater ... is greater than its adhesion with glass (d) The cohesion of water is greater than its adhesion with glass

Last Answer : Ans:(c)

On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (1) Mercury is a metal (2) Density of mercury is greater than that of water (3) Cohesion of mercury is greater than its adhesion with glass (4) Cohesion of water is greater than its adhesion with glass

Description : On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (1) Mercury is a metal (2) Density of mercury is greater than that ... is greater than its adhesion with glass (4) Cohesion of water is greater than its adhesion with glass

Last Answer : (3) Cohesion of mercury is greater than its adhesion with glass Explanation: When liquid is placed on a smooth surface like glass plate, the relative strengths of the cohesive and adhesive forces acting on ... and a surface are stronger, they will pull the liquid down, causing it to wet the surface.

The rupture and fractionation do not usually occur in the water column in vessel/tracheids during the ascent of sap because of (a) weak gravitational pull (b) transpiration pull (c) lignified thick walls (d) cohesion and adhesion

Description : The rupture and fractionation do not usually occur in the water column in vessel/tracheids during the ascent of sap because of (a) weak gravitational pull (b) transpiration pull (c) lignified thick walls (d) cohesion and adhesion

Last Answer : (d) cohesion and adhesion.

Property responsible for the talcum powder to cling to the skin is the (A) Capillary action (B) Adhesion (C) Cohesion (D) Surface tension

Description : Property responsible for the talcum powder to cling to the skin is the (A) Capillary action (B) Adhesion (C) Cohesion (D) Surface tension

Last Answer : Option B

The force that holds two particles of the different kind together is called as a) Adhesion c) Shear force b) Cohesion d) Compressive

Description : The force that holds two particles of the different kind together is called as a) Adhesion c) Shear force b) Cohesion d) Compressive

Last Answer : a) Adhesion

The force that holds two particles of the same kind together is called as a) Adhesion c) shear force b) cohesion d) compressive

Description : The force that holds two particles of the same kind together is called as a) Adhesion c) shear force b) cohesion d) compressive

Last Answer : b) cohesion

On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (1) Mercury is a metal (2) Density of mercury is greater than that of water (3) Cohesion of mercury is greater than its adhesion with glass (4) Cohesion of water is greater than its adhesion with glass

Description : On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (1) Mercury is a metal (2) Density of mercury is greater than that ... is greater than its adhesion with glass (4) Cohesion of water is greater than its adhesion with glass

Last Answer : Cohesion of mercury is greater than its adhesion with glass

Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by the force of adhesion between liquid molecules c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Description : Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by ... it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Last Answer : c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions

High temperature carbonisation of coal produces (A) Inferior coke compared to low temperature carbonisation (B) Less of gases compared to liquid products (C) Large quantity of tar compared to low temperature carbonisation (D) None of these

Description : High temperature carbonisation of coal produces (A) Inferior coke compared to low temperature carbonisation (B) Less of gases compared to liquid products (C) Large quantity of tar compared to low temperature carbonisation (D) None of these

Last Answer : (D) None of these

High temperature carbonisation of coal produces (A) Inferior coke compared to low temperature carbonisation(B) Less of gases compared to liquid products(C) Larger quantity of tar compared to low temperature carbonisation(D) None of these

Description : High temperature carbonisation of coal produces (A) Inferior coke compared to low temperature carbonisation (B) Less of gases compared to liquid products (C) Larger quantity of tar compared to low temperature carbonisation (D) None of these

Last Answer : (D) None of these

Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification (B) Heating and dehumidification at almost constant wet bulb temperature (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Description : Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification ... (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Last Answer : (B) Heating and dehumidification at almost constant wet bulb temperature

At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Description : At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Last Answer : (C) Same

Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Last Answer : (A) Higher melting points

Piping in a soil mass is a) Erosion of subsoil by the high velocities of flow of water through it when such velocities exceed a certain limit* b) Caused due to very low exit gradient c) Due to continuous passage of water through a series of well connected pores d) Due to loss of the strength of cohesion less soil because of upward flow of of water

Description : Piping in a soil mass is a) Erosion of subsoil by the high velocities of flow of water through it when such velocities exceed a certain limit* b) Caused due to very low exit gradient c) ... connected pores d) Due to loss of the strength of cohesion less soil because of upward flow of of water

Last Answer : a) Erosion of subsoil by the high velocities of flow of water through it when such velocities exceed a certain limit*

The process of diffusion of one liquid into the other through a semi permeable membrane is called (A) Viscosity (B) Osmosis (C) Surface tension (D) Cohesion

Description : The process of diffusion of one liquid into the other through a semi permeable membrane is called (A) Viscosity (B) Osmosis (C) Surface tension (D) Cohesion

Last Answer : Answer: Option B

Free surface of a liquid tends to contract to the smallest possible area due to force of (A) Surface tension (B) Viscosity (C) Friction (D) Cohesion

Description : Free surface of a liquid tends to contract to the smallest possible area due to force of (A) Surface tension (B) Viscosity (C) Friction (D) Cohesion

Last Answer : Answer: Option A

If the surface of liquid is convex, men (A) Cohesion pressure is negligible (B) Cohesion pressure is decreased (C) Cohesion pressure is increased (D) There is no cohesion pressure

Description : If the surface of liquid is convex, men (A) Cohesion pressure is negligible (B) Cohesion pressure is decreased (C) Cohesion pressure is increased (D) There is no cohesion pressure

Last Answer : Answer: Option C

Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Description : Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Last Answer : (A) Less than

Relative humidity is a) the ratio of water vapour in the air compared to the total amount water vapour the air could contain at a given temperature b) equal to the dry bulb temperature divided by the wet bulb temperature c) equal to the wet bulb temperature divided by the dry bulb temperature d) the ratio of the mass of water vapour divided by the mass of dry air e) the ratio of the mass of water vapour divided by the mass of wet air

Description : Relative humidity is a) the ratio of water vapour in the air compared to the total amount water vapour the air could contain at a given temperature b) equal to the dry bulb temperature divided by the wet bulb ... of dry air e) the ratio of the mass of water vapour divided by the mass of wet air

Last Answer : ANSWER : A

Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Description : Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Last Answer : (A) Abrasion resistance

A solid cube is subjected to equal normal forces on all its faces. The volumetric strain will be x- times the linear strain in any of the three axes when (A) x = 1 (B) x = 2 (C) x = 3 (D) x = 4

Description : A solid cube is subjected to equal normal forces on all its faces. The volumetric strain will be x- times the linear strain in any of the three axes when (A) x = 1 (B) x = 2 (C) x = 3 (D) x = 4

Last Answer : (C) x = 3

Electric process as compared to wet process (for the manufacture of phosphoric acid) (A) Can use only high grade phosphate rock (B) Is used less frequently (C) Produces a valuable by-product called gypsum (D) Is weak acid process

Description : Electric process as compared to wet process (for the manufacture of phosphoric acid) (A) Can use only high grade phosphate rock (B) Is used less frequently (C) Produces a valuable by-product called gypsum (D) Is weak acid process

Last Answer : (B) Is used less frequently

Rise of water table in cohesion-less soils upto ground surface reduces the net ultimate bearing capacity approximately by (A) 25 % (B) 50 % (C) 75 % (D) 90 %

Description : Rise of water table in cohesion-less soils upto ground surface reduces the net ultimate bearing capacity approximately by (A) 25 % (B) 50 % (C) 75 % (D) 90 %

Last Answer : (B) 50 %

Quick sand is a (A) Type of sand (B) Flow condition occurring in cohesive soils (C) Flow condition occurring in cohesion-less soils (D) Flow condition occurring in both cohesive and cohesion-less soils

Description : Quick sand is a (A) Type of sand (B) Flow condition occurring in cohesive soils (C) Flow condition occurring in cohesion-less soils (D) Flow condition occurring in both cohesive and cohesion-less soils

Last Answer : (A) Type of sand

The shearing strength of a cohesion-less soil depends upon (A) Dry density (B) Rate of loading (C) Confining pressure (D) Nature of loading

Description : The shearing strength of a cohesion-less soil depends upon (A) Dry density (B) Rate of loading (C) Confining pressure (D) Nature of loading

Last Answer : Answer: Option C

A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Description : A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of ... (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Last Answer : Answer: Option B

The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the soil is in a passive state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Description : The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the ... state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Last Answer : Answer: Option A

A liquid will not wet the surface of solid if the angle of contact is which angle? -Do You Know?

Description : A liquid will not wet the surface of solid if the angle of contact is which angle? -Do You Know?

Last Answer : 90o . A liquid does not wet the solid surface if the angle of contact is obtuse ie, greater than 90o . In this case cohesive forces will be greater than adhesive forces and so, the liquid does not wet the surface of solid.

For liquid flow through a packed bed, the superficial velocity as compared to average velocity through the channel in the bed is (A) More (B) Less (C) Equal (D) Independent of porosity

Description : For liquid flow through a packed bed, the superficial velocity as compared to average velocity through the channel in the bed is (A) More (B) Less (C) Equal (D) Independent of porosity

Last Answer : (B) Less