A tape of length and weight kg/m is suspended at its ends with a pull of kg, the sag correction is (A) l3W²/24P² (B) l²W3 /24P² (C) l²W²/24P 3 (D) lW²/24P

A tape of length and weight kg/m is suspended at its ends with a pull of kg, the sag 

correction is 

(A) l3W²/24P²

(B) l²W3

/24P²

(C) l²W²/24P

3

(D) lW²/24P

by

1 Answer

Answer :

(A) l3W²/24P²

by

Related questions

Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in temperature causes a tape to increase in length and the measured distance is too large (C) The straight distance between end points of a suspended tape is reduced by an amount called the sag correction (D) A 100 m tape of cross section 10 mm × 0.25 mm stretches about 10 mm under 5 kg pull

Description : Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in ... ) A 100 m tape of cross section 10 mm 0.25 mm stretches about 10 mm under 5 kg pull

Last Answer : (B) An increase in temperature causes a tape to increase in length and the measured distance is too large

If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Description : If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Last Answer : (A) C = w²l3 /24F²

The magnitude of ‘sag correction’ during measurement of lengths by taping is proportional to the : (a) Cube of the weight of the tape, in kg per m run (b) Cube root of the weight of the tape, in kg per m run (c) Square of the weight of the tape, in kg per m run (d) Square root of the weight of the tape, in kg per m run

Description : The magnitude of sag correction' during measurement of lengths by taping is proportional to the : (a) Cube of the weight of the tape, in kg per m run (b) Cube root of the weight of the tape, in kg per m run ... the tape, in kg per m run (d) Square root of the weight of the tape, in kg per m run

Last Answer : (c) Square of the weight of the tape, in kg per m run

A standard steel tape of length 30 m and cross-section 15 × 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 × 106 kg/cm2 , the correction to be applied is (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Description : A standard steel tape of length 30 m and cross-section 15 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of ... (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Last Answer : (A) - 0.000909 m

The sag of 50 m tape weighing 4 kg under 5 kg tension is roughly (A) 0.043 m (B) 0.053 m (C) 0.063 m (D) 0.083 m

Description : The sag of 50 m tape weighing 4 kg under 5 kg tension is roughly  (A) 0.043 m  (B) 0.053 m  (C) 0.063 m  (D) 0.083 m 

Last Answer : (D) 0.083 m 

While measuring with a metallic tape of 30 m length pull should be applied (A) 1 kg (B) 2 kg (C) 3 kg (D) 4 kg

Description : While measuring with a metallic tape of 30 m length pull should be applied  (A) 1 kg  (B) 2 kg  (C) 3 kg  (D) 4 kg 

Last Answer : (C) 3 kg

If the above tape weights 0.001 kg/ft, sag is a.2.73 ft b.3.13 ft c.2.90 ft d.3.03 ft e.107 dynes

Description : If the above tape weights 0.001 kg/ft, sag is a.2.73 ft b.3.13 ft c.2.90 ft d.3.03 ft e.107 dynes

Last Answer : c. 2.90 ft

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal a.the force applied on A must be equal to that on B b.at least one man on side B should be removed c.infinite force will be required to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Description : In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal ... to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Last Answer : c. infinite force will be required to be applied at both ends

The sag in a tape 100 ft long held between two supports 99.8 ft aprat at the same level is a.3.32 ft b.0.98 ft c.2.73 ft d.1.87 ft e.107 dynes

Description : The sag in a tape 100 ft long held between two supports 99.8 ft aprat at the same level is a.3.32 ft b.0.98 ft c.2.73 ft d.1.87 ft e.107 dynes

Last Answer : c. 2.73 ft

The assumption on which the trapezoidal formula for volumes is based, is (A) The end sections are parallel planes (B) The mid-area of a pyramid is half the average area of the ends (C) The volume of the Prismoidal is over-estimated and hence a Prismoidal correction is applied (D) All the above

Description : The assumption on which the trapezoidal formula for volumes is based, is (A) The end sections are parallel planes (B) The mid-area of a pyramid is half the average area of the ends (C) The volume of the Prismoidal is over-estimated and hence a Prismoidal correction is applied (D) All the above

Last Answer : (D) All the above

Which one of the following mistakes/errors may be cumulative + or - : (A) Bad ranging (B) Bad straightening (C) Erroneous length of chain (D) Sag

Description : Which one of the following mistakes/errors may be cumulative + or - :  (A) Bad ranging  (B) Bad straightening  (C) Erroneous length of chain  (D) Sag

Last Answer : (C) Erroneous length of chain

The slope correction for a length of 30 m along a gradient of 1 in 20, is (A) 3.75 cm (B) 0.375 cm (C) 37.5 cm (D) 2.75 cm

Description : The slope correction for a length of 30 m along a gradient of 1 in 20, is  (A) 3.75 cm  (B) 0.375 cm  (C) 37.5 cm  (D) 2.75 cm

Last Answer : (A) 3.75 cm 

The slope correction for a 3° slope for a length of 100 m, is (A) -0.11 m (B) -0.12 m (C) -1.87 m (D) -0.137 m

Description : The slope correction for a 3° slope for a length of 100 m, is  (A) -0.11 m  (B) -0.12 m  (C) -1.87 m  (D) -0.137 m

Last Answer : (D) -0.137 m

Two persons of masses 55 kg and 65 kg respectively, are at the opposite ends of a boat. The length of the boat is 3.0 m and weighs 100 kg. The 55 kg man walks up to the 65 kg man and sits with him. If the boat is in still water the centre of mass of the system shifts by

Description : Two persons of masses 55 kg and 65 kg respectively, are at the opposite ends of a boat. The length of the boat is 3.0 m and weighs 100 kg. The 55 kg man walks up to the 65 kg man and sits with him. If the boat is in still water the centre of mass of the system shifts by

Last Answer : (4) zero

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span (A) 2.5 cm (B) 3.0 cm (C) 4.0 cm (D) 5.0 cm

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20  meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span  (A) 2.5 cm  (B) 3.0 cm  (C) 4.0 cm  (D) 5.0 cm 

Last Answer : (C) 4.0 cm

A pile of length carrying a uniformly distributed load per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is (A) WL/8 (B) WL²/24 (C) WL²/47 (D) WL²/16

Description : A pile of length carrying a uniformly distributed load per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is (A) WL/8 (B) WL²/24 (C) WL²/47 (D) WL²/16

Last Answer : Answer: Option C

A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance of 40 kg per tonne, then the drawbar pull of the tractor will (A) Reduce by 200 kg (B) Increase by 200 kg (C) Increase by 250 kg (D) Reduce by 250 kg

Description : A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance ... 200 kg (B) Increase by 200 kg (C) Increase by 250 kg (D) Reduce by 250 kg

Last Answer : (A) Reduce by 200 kg

While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is: (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/cm2 Answer: Option

Description : While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at  the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is:  (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/c

Last Answer : (A) 960 kg/cm

A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm. Assume the acceleration due to gravity g = 10 m/s^2. The natural frequency of this spring-mass system (in rad/s) is A 100 B 150 C 200 D 250

Description : The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm. Assume the acceleration due to gravity g = 10 m/s^2. The natural frequency of this spring-mass system (in rad/s) is A 100 B 150 C 200 D 250

Last Answer : A 100

A mass of 10 kg when suspended from a spring causes a static deflection of 0.01m. Find the spring stiffness for the same system. A 9810 N/m B 8910 N/m C 1098 N/m D 9801 N/m

Description : A mass of 10 kg when suspended from a spring causes a static deflection of 0.01m. Find the spring stiffness for the same system. A 9810 N/m B 8910 N/m C 1098 N/m D 9801 N/m

Last Answer : A 9810 N/m

A mass of 10 kg when suspended from a spring causes a static deflection of 0.01m. Find the spring stiffness for the same system. A 9810 N/m B 8910 N/m C 1098 N/m D 9801 N/m

Description : A mass of 10 kg when suspended from a spring causes a static deflection of 0.01m. Find the spring stiffness for the same system. A 9810 N/m B 8910 N/m C 1098 N/m D 9801 N/m

Last Answer : D 9801 N/m

A mass of 10 kg when suspended from a spring causes a static deflection of A 0.01m. Find the spring stiffness for the same system. (A) 9810 N/m (B) 8910 N/m (C)1098 N/m (D) 9801 N/m

Description : A mass of 10 kg when suspended from a spring causes a static deflection of A 0.01m. Find the spring stiffness for the same system. (A) 9810 N/m (B) 8910 N/m (C)1098 N/m (D) 9801 N/m

Last Answer : A) 9810 N/m

A 10 Kg mass suspended by spring of stiffness 1000 N/m. the natural frequency of the system after giving excitation will be A. 0 Hz B. 1.59 Hz C. 2 Hz D. 15.9 Hz

Description : A 10 Kg mass suspended by spring of stiffness 1000 N/m. the natural frequency of the system after giving excitation will be A. 0 Hz B. 1.59 Hz C. 2 Hz D. 15.9 Hz

Last Answer : B. 1.59 Hz

Correction from previous: If you pull up a email on your laptop with a photo attachment, and then erase the email. Will the photo still be in your Internet cache?

Description : Correction from previous: If you pull up a email on your laptop with a photo attachment, and then erase the email. Will the photo still be in your Internet cache?

Last Answer : answer:What operating system? How did you view the attachment? Generally speaking, the answer is yes, but there are exceptions.

What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Description : What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Last Answer : a. 0.35

The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Description : The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Last Answer : It generates an equalization signal which corrects any frequency response problems in the input signal from the pre-amplifier circuit.

A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the joist will be, (A) 10 m (B) 12 m (C) 14 m (D) 16 m

Description : A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which  causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the  joist will be,  (A) 10 m  (B) 12 m  (C) 14 m  (D) 16 m 

Last Answer : (D) 16 m 

A uniform girder simply supported at its ends is subjected to a uniformly distributed load over its entire length and is propped at the centre so as to neutralise the deflection. The net B.M. at the centre will be (A) WL (B) WL/8 (C) WL/24 (D) WL/32

Description : A uniform girder simply supported at its ends is subjected to a uniformly distributed load over its entire length and is propped at the centre so as to neutralise the deflection. The net B.M. at the centre will be (A) WL (B) WL/8 (C) WL/24 (D) WL/32

Last Answer : (D) WL/32

A beam of length L is pinned at both ends and is subjected to a concentrated bending couple of moment M at its centre. The maximum bending moment in the beam is (A) M (B) M/2 (C) M/3 (D) ML/2

Description : A beam of length L is pinned at both ends and is subjected to a concentrated bending couple of  moment M at its centre. The maximum bending moment in the beam is  (A) M (B) M/2  (C) M/3  (D) ML/2 

Last Answer : (A) M

Mark the correct option a) The Inspector should maintain a register of lines and stages in respect of his sub division in form M-40 b) Entries should be made in the register in alphabetical order, and where a line traverses sub-divisions each Inspector should record it throughout its length c) It is of special importance that the register should be kept corrected up-todate in accordance with correction memos issued by the Superinendent from time to time. d) All the above

Description : Mark the correct option a) The Inspector should maintain a register of lines and stages in respect of his sub division in form M-40 b) Entries should be made in the register in alphabetical ... in accordance with correction memos issued by the Superinendent from time to time. d) All the above

Last Answer : d) All the above

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Last Answer : (B) 12.88

Correction per chain length of 100 links along a slope having a rise of 1 unit in horizontal units, is (A) 100/n² (B) 100 n 2 (C) 100/n 3 (D) 100/n

Description : Correction per chain length of 100 links along a slope having a rise of 1 unit in horizontal units,  is  (A) 100/n² (B) 100 n 2 (C) 100/n 3 (D) 100/n

Last Answer : (A) 100/n²

If is the difference in height between end points of a chain of length , the required slope correction is (A) h²/2l (B) h/2l (C) h²/l (D) 2h²/2l

Description : If is the difference in height between end points of a chain of length , the required slope correction is (A) h²/2l (B) h/2l (C) h²/l (D) 2h²/2l

Last Answer : (A) h²/2l

If is the perimete D is the closing error in departure, the correction for the departure of a traverse side of length , according to Bowditch rule, is (A) D × L/l (B) D × l²/L (C) L × l D (D) D × l/L

Description : If is the perimete D is the closing error in departure, the correction for the departure of a traverse side of length , according to Bowditch rule, is (A) D × L/l (B) D × l²/L (C) L × l D (D) D × l/L

Last Answer : (D) D × l/L

Two bodies of mass 6 kg and 9 kg are connected with a light inextensile string passing over a smooth pulley with one of the bodies on a smooth inclined plane (θ = 30°) and the other hanging freely from the other end. Show that the time taken by 9 kg to pull 6 kg up the entire length is half the time taken by 6 kg to pull 9 kg over the same plane.

Description : Two bodies of mass 6 kg and 9 kg are connected with a light inextensile string passing over a smooth pulley with one of the bodies on a smooth inclined plane (θ = 30°) and the other hanging freely from the ... kg up the entire length is half the time taken by 6 kg to pull 9 kg over the same plane.

Last Answer : Given: Mass of body A (mA) = 6 kg Mass of body B (mB) = 9 kg Angle of inclination of the plane (θ) = 30° Let's assume that the acceleration of body A (aA) and body B (aB) are in opposite ... we know that the time taken (t) is given by the formula: t = √(2d/a), where d is the distance travelled

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart...

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span?

Last Answer : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span 4.0 cm.

For a 66 kV line having span of 200 meters between towers the approximate sag will be 2 m. If the span is

Description : For a 66 kV line having span of 200 meters between towers the approximate sag will be 2 m. If the span is double the sag will be:  (A) 1 m (B) 2 m (C) 4m (D) 8m

Last Answer : For a 66 kV line having span of 200 meters between towers the approximate sag will be 2 m. If the span is double the sag will be: 8m

A pressure conduit carrying water beneath a stream or a canal, is known as (A) Sag (B) Depressed pipe (C) Inverted syphon (D) All the above

Description : A pressure conduit carrying water beneath a stream or a canal, is known as  (A) Sag  (B) Depressed pipe  (C) Inverted syphon  (D) All the above 

Last Answer : (D) All the above 

When an up gradient of a highway meets a downgrade, the vertical curve provided, is known as (A) Valley curve (B) Sag curve (C) Summit curve (D) All the above

Description : When an up gradient of a highway meets a downgrade, the vertical curve provided, is known as (A) Valley curve (B) Sag curve (C) Summit curve (D) All the above

Last Answer : Answer: Option C

One end of uniform wire of length Land of weight W is attached rigidly to a point in the roof and a weight `W_(1)` is suspended from its lower end. If

Description : One end of uniform wire of length Land of weight W is attached rigidly to a point in the roof and a weight `W_(1)` is suspended from its lower end. If

Last Answer : One end of uniform wire of length Land of weight W is attached rigidly to a point in the roof and a weight `W_(1)` ... 3W//4)]//S` D. `(W_(1)+W)//S`

In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two conducing springs of spring constant k each. U

Description : In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two conducing springs of spring constant k each. U

Last Answer : In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two ... mean position of rod D. None of the above

In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two conducing springs of spring constant k each. U

Description : In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two conducing springs of spring constant k each. U

Last Answer : In the figure shown a uniform conducing rod of mass m and length l is suspended invertical plane by two conducing ... ^(2)C)/(K))` D. None of these

If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2(D) D/6m(h1 - h2)3

Description : If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2 (D) D/6m(h1 - h2)3

Last Answer : (C) D/6m(h1 - h2)2

If is the difference in level between end points separated by , then the slope correction is [(h²/2l) + (h 4 /8l3 )]. The second term may be neglected if the value of in a 20 m distance is less than (A) ½ m (B) 1 m (C) 2 m (D) 3 m

Description : If is the difference in level between end points separated by , then the slope correction is [(h²/2l) + (h 4 /8l3 )]. The second term may be neglected if the value of in a 20 m distance is less than (A) ½ m (B) 1 m (C) 2 m (D) 3 m

Last Answer : (D) 3 m

A man wished to move a block of size 3 m x 3 m weighing 80 kg. The coefficient of friction between the block and the ground is 0.27. Which of the following methods should be used? a.Slide along the ground by pushing b.Ask for cranes c.Pull it d.Tip it over e.Lift it bodily

Description : A man wished to move a block of size 3 m x 3 m weighing 80 kg. The coefficient of friction between the block and the ground is 0.27. Which of the following methods should be used? a.Slide along the ground by pushing b.Ask for cranes c.Pull it d.Tip it over e.Lift it bodily

Last Answer : d. Tip it over

A pile of length carrying a uniformly distributed load per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be (A) WL²/15 (B) WL²/30 (C) WL²/60 (D) WL²/90

Description : A pile of length carrying a uniformly distributed load per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be (A) WL²/15 (B) WL²/30 (C) WL²/60 (D) WL²/90

Last Answer : Answer: Option D

In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is provided to extract the soil sample (C) The tube is raised and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above

Description : In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is ... and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above

Last Answer : Answer: Option D