The lintels are preferred to arches because (A) Arches require more headroom to span the openings like doors, windows etc. (B) Arches require strong abutments to withstand arch thrust (C) Arches are difficult in construction (D) All of the abo

The lintels are preferred to arches because
(A) Arches require more headroom to span the openings like doors, windows etc.
(B) Arches require strong abutments to withstand arch thrust
(C) Arches are difficult in construction
(D) All of the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

In the construction of arches, sand box method is used for (A) Centring (B) Actual laying of arch work (C) Striking of centring (D) None of the above

Description : In the construction of arches, sand box method is used for (A) Centring (B) Actual laying of arch work (C) Striking of centring (D) None of the above

Last Answer : Answer: Option C

If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit length over the entire span, (A) Horizontal thrust is wl2 /8h (B) S.F. will be zero throughout (C) B.M. will be zero throughout (D) All the above

Description : If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit  length over the entire span,  (A) Horizontal thrust is wl2 /8h (B) S.F. will be zero throughout  (C) B.M. will be zero throughout  (D) All the above 

Last Answer : (D) All the above 

A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half left hand span. The horizontal thrust at the support will be (A) 10.8 tonnes (B) 1.08 tonnes (C) 1.8 tonnes (D) 0.8 tonnes

Description : A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m  and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half  left hand span ... A) 10.8 tonnes  (B) 1.08 tonnes  (C) 1.8 tonnes  (D) 0.8 tonnes 

Last Answer : (B) 1.08 tonnes 

An arch may fail due to (A) Uneven settlement of abutments (B) Sliding of voussoirs (C) Crushing of the material (D) All the above

Description : An arch may fail due to (A) Uneven settlement of abutments (B) Sliding of voussoirs (C) Crushing of the material (D) All the above

Last Answer : Answer: Option D

Ingress of cold air in the furnaces through cracks, charging doors, openings etc(A) Reduces the flue gas temperature and makes the furnace atmosphereoxidising(B) Increases the load on the induced draft fan(C) Reduces the furnace draught(D) All (A), (B) and (C)

Description : Ingress of cold air in the furnaces through cracks, charging doors, openings etc (A) Reduces the flue gas temperature and makes the furnace atmosphere oxidising (B) Increases the load on the induced draft fan (C) Reduces the furnace draught (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be in the ratio of (A) 1 : 1½ : 2 (B) 2 : 1½ : 1 (C) 1 : 1 : 2(D) None of these

Description : There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and  each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be  in the ratio of  (A) 1 ... (B) 2 : 1½ : 1  (C) 1 : 1 : 2 (D) None of these

Last Answer : (C) 1 : 1 : 2 

Which of the following stone is best suited for construction of piers and abutments of a railway bridge? (A) Granite (B) Sand stone (C) Lime stone (D) Quartze

Description : Which of the following stone is best suited for construction of piers and abutments of a railway bridge? (A) Granite (B) Sand stone (C) Lime stone (D) Quartze

Last Answer : Answer: Option A

Carpet area does not include the area of (A) The walls along with doors and other openings (B) Bath room and lavatory (C) Kitchen and pantry (D) All the above

Description : Carpet area does not include the area of (A) The walls along with doors and other openings (B) Bath room and lavatory (C) Kitchen and pantry (D) All the above

Last Answer : (D) All the above

The PVC doors and windows are preferred as they are (A) Rust proof (B) Rot proof (C) Water proof (D) All of these

Description : The PVC doors and windows are preferred as they are (A) Rust proof (B) Rot proof (C) Water proof (D) All of these

Last Answer : Answer: Option D

In a single span bridge, the clear span is the distance between a) Centres of Abutments b) Inner faces of Abutments* c) Outer faces of Abutments d) Width of Abutment

Description : In a single span bridge, the clear span is the distance between a) Centres of Abutments b) Inner faces of Abutments* c) Outer faces of Abutments d) Width of Abutment

Last Answer : b) Inner faces of Abutments*

For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Description : For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (B) Is decreased

For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Description : For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg

Description : A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg

Last Answer : (A) 1250 kg

An arch may be subjected to (A) Shear and axial force (B) Bending moment and shear force (C) Bending moment and axial force (D) Thrust, shear force and bending moment

Description : An arch may be subjected to  (A) Shear and axial force  (B) Bending moment and shear force  (C) Bending moment and axial force  (D) Thrust, shear force and bending moment 

Last Answer : (D) Thrust, shear force and bending moment 

Which of the following stone is best suited for construction of piers and abutments of Railway Bridge a) Granite* b) Sandstone c) Limestone d) Quartzite

Description : Which of the following stone is best suited for construction of piers and abutments of Railway Bridge a) Granite* b) Sandstone c) Limestone d) Quartzite

Last Answer : a) Granite*

Fuel economy in furnaces can be achieved by (A) Using oxygen enriched combustion air (B) Preheating the combustion air (C) Reducing the heat loss through furnace openings & doors (D) All (A), (B) and (C

Description : Fuel economy in furnaces can be achieved by (A) Using oxygen enriched combustion air (B) Preheating the combustion air (C) Reducing the heat loss through furnace openings & doors (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

The measurement is made for stone work in square metre in case of (A) Wall facing (B) Columns, lintels, copings (C) Building work (D) (a) and (d) of the above

Description : The measurement is made for stone work in square metre in case of (A) Wall facing (B) Columns, lintels, copings (C) Building work (D) (a) and (d) of the above

Last Answer : (D) (a) and (d) of the above

Exposed portions of vertical surface at right angles to the door or window frame, are known as (A) Jambs (B) Lintels (C) Reveals (D) Soffit

Description : Exposed portions of vertical surface at right angles to the door or window frame, are known as (A) Jambs (B) Lintels (C) Reveals (D) Soffit

Last Answer : Answer: Option C

The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with a uniformly distributed load l t per horizontal length is (where Ic is the M.I. at the crown, which varies as the slope of the arch). (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Description : The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with  a uniformly distributed load l t per horizontal length is (where Ic  is the M.I. at the crown, which  varies as the slope ... arch).  (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Last Answer : (D) 200/E

A three hinged arch is generally hinged at its supports and (A) At one quarter span (B) At the crown (C) Anywhere in the rib (D) None of these

Description : A three hinged arch is generally hinged at its supports and  (A) At one quarter span  (B) At the crown  (C) Anywhere in the rib  (D) None of these 

Last Answer : (C) Anywhere in the rib 

The equation of a parabolic arch of span and rise , is given by (A) y = h/l² × (1 - x) (B) y = 2h/l² × (1 - x) (C) y = 3h/l² × (1 - x) (D) y = 4h/l² × (1 - x)

Description : The equation of a parabolic arch of span and rise , is given by  (A) y = h/l² × (1 - x)  (B) y = 2h/l² × (1 - x)  (C) y = 3h/l² × (1 - x)  (D) y = 4h/l² × (1 - x) 

Last Answer : (D) y = 4h/l² × (1 - x) 

An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of span 2l and rise h hinged at the crown, the horizontal reaction at the support, is (A) Wa/h (B) Wa/2h(C) 2W/ha(D) 2h/W

Description : An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of  span 2l and rise h hinged at the crown, the horizontal reaction at the support, is  (A) Wa/h  (B) Wa/2h (C) 2W/ha (D) 2h/W

Last Answer : (B) Wa/2h

A diagram which shows the variations of the axial load for all sections of the span of a beam, is called (A) Bending moment diagram (B) Shear force diagram (C) Thrust diagram (D) Stress diagram

Description : A diagram which shows the variations of the axial load for all sections of the span of a beam, is called (A) Bending moment diagram (B) Shear force diagram (C) Thrust diagram (D) Stress diagram

Last Answer : Answer: Option C

If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment

Description : If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment

Last Answer : (A) Compressive force

In jack arch floor, the rise is kept (A) 1/6th of the span (B) 1/8th of the span (C) 1/10th of the span (D) 1/12th of the span

Description : In jack arch floor, the rise is kept (A) 1/6th of the span (B) 1/8th of the span (C) 1/10th of the span (D) 1/12th of the span

Last Answer : Answer: Option D

The atmosphere exerts enormous pressure on us. But we do not feel it because (a) we are used to it (b) our bones are very strong and can withstand this pressure (c) the surface area of our head is very small (d) our blood exerts a pressure slightly more than that of the atmosphere

Description : The atmosphere exerts enormous pressure on us. But we do not feel it because (a) we are used to it (b) our bones are very strong and can withstand this pressure (c) the surface area of our head is very small (d) our blood exerts a pressure slightly more than that of the atmosphere

Last Answer : Ans:(d)

The art of developing the plant or training the plant into different forms or shapes like animals, birds, arches, etc.

Description : The art of developing the plant or training the plant into different forms or shapes like animals, birds, arches, etc.

Last Answer : Ans. Topiary

In the illustrated motor, roller bearings are used because __________. EL-0001 A. of their ability to absorb moderate thrust loads B. they electrically insulate the rotor from the frame reducing cross-currents C. the shafting and end bells do not require as close a tolerance to properly fit this type of bearing D. the clearance between the rotor and stator is generally as close as mechanical tolerance will permit

Description : In the illustrated motor, roller bearings are used because __________. EL-0001 A. of their ability to absorb moderate thrust loads B. they electrically insulate the rotor from the frame reducing ... clearance between the rotor and stator is generally as close as mechanical tolerance will permit

Last Answer : Answer: D

A group of ornamental plants used to grow over walls, trellis, arches, pergolas, arbours, pillars, bowers etc.

Description : A group of ornamental plants used to grow over walls, trellis, arches, pergolas, arbours, pillars, bowers etc.

Last Answer : Ans. Climbers and Creepers

A circular gravity aqueduct is not generally preferred to because of (A) Its maximum hydraulic mean depth (B) Maximum area per unit of wetted perimeter (C) Minimum cost of construction (D) Its proper support on the ground

Description : A circular gravity aqueduct is not generally preferred to because of (A) Its maximum hydraulic mean depth (B) Maximum area per unit of wetted perimeter (C) Minimum cost of construction (D) Its proper support on the ground

Last Answer : (D) Its proper support on the ground

How many travel job openings require this education?

Description : How many travel job openings require this education?

Last Answer : Many travel job openings require education. It's hard toquantify the number of openings that require education, becausethere are so many different types of travel jobs available, andalso because often times experience can be substituted foreducation.

For mass concrete in piers and abutments, the grade of concrete mix used, is (a) 1:1:2 (b) 1:1.5:2 (c) 1:2:4 (d) 1:3:6

Description : For mass concrete in piers and abutments, the grade of concrete mix used, is (a) 1:1:2 (b) 1:1.5:2 (c) 1:2:4 (d) 1:3:6

Last Answer : (d) 1:3:6

The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Description : The headroom above a working platform must be at least? a. 1.6m b. 2.1m c. 2m d. 2.6m

Last Answer : c. 2m

Define the terms Newel post and Headroom in vertical communication.

Description : Define the terms Newel post and Headroom in vertical communication.

Last Answer : Newel post : This is the vertical member which is placed at the ends of flights to connect the end of strings and hand rail.  Headroom : The vertical distance between the nosing of one flight and bottom of flight immediately above is known as the headroom.

Which one of the following statements is not correct? Vulcanisation of rubber makes it - (1) soft and flexible (2) strong and hard (3) chemical resistant (4) withstand higher temperatures

Description : Which one of the following statements is not correct? Vulcanisation of rubber makes it - (1) soft and flexible (2) strong and hard (3) chemical resistant (4) withstand higher temperatures

Last Answer : (1) soft and flexible Explanation: In order to give more strength and more elasticity, natural rubber is heated with sulphur or sulphur compounds at 150°C temperature. Vulcanized rubber has good ... of vulcanized rubber is enhanced up to 100°C. It has good resistance to organic solvents.

Which of the following statements is correct? (a) Sporopollenin can be degraded by enzymes. (b) Sporopollenin is made up of inorganic materials. (c) Sporopollenin can withstand high temperatures as well as strong acids and alkalis. (d) Sporopollenin can withstand high temperatures but not strong acids.

Description : Which of the following statements is correct? (a) Sporopollenin can be degraded by enzymes. (b) Sporopollenin is made up of inorganic materials. (c) Sporopollenin can withstand high temperatures ... strong acids and alkalis. (d) Sporopollenin can withstand high temperatures but not strong acids.

Last Answer : (c) Sporopollenin can withstand high temperatures as well as strong acids and alkalis

Which one of the following statements is not correct? Vulcanisation of rubber makes it (1) soft and flexible (2) strong and hard (3) chemical resistant (4) withstand higher temperatures

Description : Which one of the following statements is not correct? Vulcanisation of rubber makes it (1) soft and flexible (2) strong and hard (3) chemical resistant (4) withstand higher temperatures

Last Answer : soft and flexible

In the construction of a two­span bridge (span length = L) by using span­by­span construction, why is a length of about 1.25L bridge segment is constructed in the first phase of construction?

Description : In the construction of a two­span bridge (span length = L) by using span­by­span construction, why is a length of about 1.25L bridge segment is constructed in the first phase of construction?

Last Answer : Basically, there are mainly three reasons for this arrangement: (i) The permanent structure is a statically indeterminate structure. During construction by using span­by­span construction, if the ... 25L from the first pier where there is relatively more space to accommodate prestressing works.

DNA po lymerase of T. aquat icus is preferred to that of E. coli in PCR because (A) It replicates DNA more efficiently (B) It doesn’t require primers (C) It is not denatured at the melting temperature of DNA (D) It doesn’t cause errors in replication

Description : DNA po lymerase of T. aquat icus is preferred to that of E. coli in PCR because (A) It replicates DNA more efficiently (B) It doesn’t require primers (C) It is not denatured at the melting temperature of DNA (D) It doesn’t cause errors in replication

Last Answer : Answer : C

The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall

Description : The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall

Last Answer : (D) Half brick wall

Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches

Description : Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches

Last Answer : Answer: Option C

Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Description : Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Last Answer : c. liable to radiate

The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Description : The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches

Last Answer : (B) Broken glass coping

In arches, stratified stones are placed so that their planes are (A) Parallel (B) Perpendicular (C) Radial (D) None of these

Description : In arches, stratified stones are placed so that their planes are (A) Parallel (B) Perpendicular (C) Radial (D) None of these

Last Answer : Answer: Option C

A heavy stone is suitable for (A) Arches (B) Rubble masonry (C) Roads (D) Retaining walls

Description : A heavy stone is suitable for (A) Arches (B) Rubble masonry (C) Roads (D) Retaining walls

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Soft stones are required for carving (B) Light stones are required for arches (C) Hard stones are required to stand high pressure (D) All the above

Description : Pick up the correct statement from the following: (A) Soft stones are required for carving (B) Light stones are required for arches (C) Hard stones are required to stand high pressure (D) All the above

Last Answer : Answer: Option D

A bull nose brick is not used for (A) Rounding off sharp corners (B) Pillars (C) Decoration purpose (D) Arches

Description : A bull nose brick is not used for (A) Rounding off sharp corners (B) Pillars (C) Decoration purpose (D) Arches

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above

Description : Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above

Last Answer : Answer: Option D

The triangular portion between any two adjacent arches and the tangent to their crowns, is (A) Haunch (B) Spandril (C) Soffit (D) Rise

Description : The triangular portion between any two adjacent arches and the tangent to their crowns, is (A) Haunch (B) Spandril (C) Soffit (D) Rise

Last Answer : Answer: Option B

Alternators are preferred over dynamo because A. Alternators can produce a strong current of 30-40 amperes. B. Alternators don’t required cutout reiny C. Alternators don’t have commutaters D. All of the above

Description : Alternators are preferred over dynamo because A. Alternators can produce a strong current of 30-40 amperes. B. Alternators don’t required cutout reiny C. Alternators don’t have commutaters D. All of the above

Last Answer : D. All of the above