The maximum non-verticality of the bore of a well 200 m deep, may be permitted up to
(A) 25 cm
(B) 50 cm
(C) 75 cm
(D) 100 cm

1 Answer

Answer :

(D) 100 cm

Related questions

Description : If vertical angles of inclined sights do not exceed 10° and non-verticality of the staff remains within 1°, stadia system of tacheometric observations are made on (A) Staff normal (B) Staff vertical (C) Staff normal as well as vertical (D) None of these

Last Answer : (A) Staff normal

Description : The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm  for an eccentric load 100 t for non-development of tension, is  (A) 2.75 cm  (B) 3.00 cm  (C) 3.50 cm  (D) 4.25 cm

Last Answer : (D) 4.25 cm

Description : If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option C

Description : If the effective plan area of a warehouse is 54 sq. m, and maximum height of piles permitted is 270 cm, the number of cement bags to be stored, is (A) 2000 bags (B) 2200 bags (C) 2400 bags (D) 2700 bags

Last Answer : Answer: Option D

Description : Diopter is the power of a lens having a focal length of (A) 25 cm (B) 50 cm (C) 75 cm (D) 100 cm

Last Answer : (D) 100 cm

Description : The prescribed hardness limit of potable water ranges between  (A) 50 to 75 P.P.M.  (B) 75 to 115 P.P.M.  (C) 100 to 150 P.P.M.  (D) 150 to 200 P.P.M.

Last Answer : (B) 75 to 115 P.P.M. 

Description : Non-passing sight distance along a road is the longest distance at which the driver of a moving vehicle, may see an obstacle on the pavement (A) 10 cm high (B) 25 cm high (C) 50 cm high (D) 100 cm high

Last Answer : Answer: Option A

Description : Two observation wells penetrating into a confined aquifer are located 1500 m apart in the direction of flow. Heads of 50 m and 25 m are indicated at these two observation wells. If the coefficient of permeability for the ... well to another is (a) 75 days (b) 750 days (c) 1200 days (d) 3000 days

Last Answer : (b) 750 days

Description : If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Last Answer : Answer: Option C

Description : If total run off of a basin of 50 hectares is 0.8 cm, the ordinate of Bernard's distribution graph, may be calculated by the formula (where Q is the discharge in cumecs at the given time) (A) y = 50 Q (B) y = 100 Q (C) y = 200 Q (D) y = 250 Q

Last Answer : Answer: Option D

Description : P.V.C. pipes can withstand pressure bead of water upto  (A) 25 m  (B) 50 m  (C) 75 m  (D) 100 m 

Last Answer : (D) 100 m 

Description : Stroke bore ratio for tractor engine is (a) 1.25 (b) 1.45 (c) 1.75 (d) 2.00

Last Answer : (a) 1.25

Description : Based on its dry weight, a freshly felled tree may contain water (A) 25 % (B) 50 % (C) 75 % (D) 100 %

Last Answer : Answer: Option D

Description : The total sulphur content of the body is (A) 25–50 gm (B) 50–75 gm (C) 100–125 gm (D) 150–200 gm

Last Answer : Answer : D

Description : Fee for availing business reply service a) Apr to Jun -100, Jul to Sep-75, Oct to Dec-50, Jan to Mar -25 b) Apr to Jun -200, Jul to Sep-150, Oct to Dec-100, Jan to Mar -50 c) Apr to Jun -250, Jul to Sep-150, Oct to Dec-75, Jan to Mar -50 d) Free of cost

Last Answer : b) Apr to Jun -200, Jul to Sep-150, Oct to Dec-100, Jan to Mar -50

Description : If 50 m point of a 100 m tape is 50 cm off line, and 50 m sections are straight, an error is generated equal to (A) 1/10,000 (B) 1/15,000 (C) 1/20,000 (D) 1/25,000

Last Answer : (C) 1/20,000

Description : In citrus 80-90% of the active roots are present in the soil to a depth of: a. 25 cm b. 50 cm c. 75 cm d. 100 cm

Last Answer : 25 cm

Description : For large sewers, maximum distance between manholes may be A. 50 m B. 100 m C. 200 m D. 300 m

Last Answer : ANS: D

Description : The bed slope in slow sand filters, is generally kept  (A) 1 in 50  (B) 1 in 75  (C) 1 in 100  (D) 1 : 200

Last Answer : (C) 1 in 100 

Description : An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity ... , is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Last Answer : Answer: Option A

Description : Evergreen rain forest is mainly found in regions having well distributed annual rainfall – (1) Below 50 cm (2) 50-100 cm (3) 100-200 cm (4) More than 200 cm

Last Answer : (4) More than 200 cm Explanation: Tropical evergreen forests are usually found in areas receiving more than 200 cm of rainfall and having a temperature of 15 °C to 30 °C. They occupy about seven per cent of the Earth's land surface and harbour more than half of the world's plants and animals

Description : Evergreen rain forest is mainly found in regions having well distributed annual rainfall (1) Below 50 cm (2) 50-100 cm (3) 100-200 cm (4) More than 200 cm

Last Answer : More than 200 cm

Description : If the rate of change of grade permitted along a vertical curve is r and total change of grade is g%, the length L of the curve to be provided, is (A) L = (r × 100/g) m (B) L = (g × 100/r) m (C) L = (r + g) × 100m (D) L = [100/(r + g)] m

Last Answer : Answer: Option B

Description : Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds (A) 50 cm (B) 75 cm (C) 100 cm (D) 120 cm

Last Answer : Answer: Option B

Description : While calculating the overtaking sight distance, the height of the object above road surface, is assumed (A) 50 cm (B) 75 cm (C) 100 cm (D) 120 cm

Last Answer : Answer: Option D

Description : A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Last Answer : Answer: Option C

Description : A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so  that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the  value of E = 0.2 ... joist, is  (A) 200 mm  (B) 250 mm  (C) 300 mm  (D) 400 mm 

Last Answer : (D) 400 mm 

Description : The maximum permitted loss of head in a rapid sand filter, is (A) 1 m (B) 2 m (C) 3 m (D) 4 m

Last Answer : (C) 3 m

Description : Indian Meteorological department uses the standard gauges whose collectors have apertures of (A) 50 or 100 sq. cm area (B) 100 or 150 sq. cm area (C) 100 or 200 sq. cm area (D) 250 or 500 sq. cm area

Last Answer : Answer: Option C

Description : The maximum amount of dust which may be permitted in aggregates is (A) 5% of the total aggregates for low workability with a coarse grading (B) 10% of the total aggregates for low workability with ... of the total aggregates for a mix having high workability with fine grading (D) All the above

Last Answer : Answer: Option D

Description : DGPS is based on the concept that bias errors in the position of locations in a given local area, are same if their distances are within (A) 25 km (B) 50 km (C) 75 km (D) 100 km

Last Answer : Answer: Option D

Description : The thickness of bituminous carpet varies from (A) 20 to 25 mm (B) 50 to 75 mm (C) 75 to 100 mm (D) 100 to 120 mm

Last Answer : Answer: Option A

Description : The concrete slump recommended for beams and slabs; is (A) 25 to 50 mm (B) 25 to 75 mm (C) 30 to 125 mm (D) 50 to 100 mm

Last Answer : Answer: Option C

Description : The concrete slump recommended for columns, is (A) 25 to 50 mm (B) 25 to 75 mm (C) 75 to 125 mm (D) 50 to 100 mm

Last Answer : Answer: Option C

Description : The concrete slump recommended for foundations, is (A) 25 to 50 mm (B) 30 to 125 mm (C) 50 to 100 mm (D) 75 to 125 mm

Last Answer : Answer: Option C

Description : In favourable circumstances a 15 cm concrete cube after 28 days, attains a maximum crushing strength (A) 100 kg/cm2 (B) 200 kg/cm2 (C) 300 kg/cm2 (D) 400 kg/cm

Last Answer : Answer: Option D

Description : To prevent segregation, the maximum height for placing concrete, is (A) 100 cm (B) 125 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option A

Description : If the intercept on a vertical staff is observed as 0.75 m from a tachometer, the horizontal distance between tachometer and staff (A) 7.5 m (B) 25 m (C) 50 m (D) 75 m

Last Answer : (D) 75 m

Description : The top height of a route marker above crown level is (A) 1.50 m (B) 1.75 m (C) 2.00 m (D) 2.25 m

Last Answer : Answer: Option D

Description : For a 6.6 m wide two lane pavement, berms are provided on either side having a width of (A) 1.00 m (B) 1.25 m (C) 1.50 m (D) 1.75 m

Last Answer : Answer: Option C

Description : The maximum shear stress (qmax) in a rectangular beam is (A) 1.25 times the average (B) 1.50 times the average (C) 1.75 times the average (D) 2.0 times the average

Last Answer : Answer: Option B

Description : For wave action in dams, the maximum height of freeboard is generally taken to be equal to (A) 0.5 hw (B) 0.75 hw (C) 1.25 hw (D) 1.50 hw

Last Answer : Answer: Option D

Description : If the sides o a slab simply supported on its edges and spanning in two way are equal, then the maximum bending moment is multiplied by. (a) 0.25 (b) 0.50 (c) 0.75 (d) 0.85

Last Answer : (b) 0.50

Description : The maximum shear stress in rectangular beam is _____________________times of average shear stress. (a) 1.15 (b) 1.25 (c) 1.50 (d) 1.75

Last Answer : (c) 1.50

Description : For a continuous slab of 3 m × 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (A) 50 mm (B) 75 mm (C) 100 mm (D) 120 mm

Last Answer : (B) 75 mm

Description : For a continuous slab of 3 m x 35 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (a) 120 mm (b) 100 mm (c) 75 mm (d) 50 mm

Last Answer : (a) 120 mm

Description : Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of ... should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Last Answer : (B) 28.28 m

Description : The live load to be considered for an accessible roof, is (A) Nil (B) 75 kg/m3 (C) 150 kg/m2 (D) 200 kg/cm

Last Answer : Answer: Option C

Description : The adequate daily dietary requirement of molybdenum for normal human adult is (A) 10–20 µg (B) 25–50 µg (C) 50–70 µg (D) 75–200 µg

Last Answer : Answer : D