Indian Meteorological department uses the standard gauges whose collectors have apertures of (A) 50 or 100 sq. cm area (B) 100 or 150 sq. cm area (C) 100 or 200 sq. cm area (D) 250 or 500 sq. cm area

Indian Meteorological department uses the standard gauges whose collectors have apertures of
(A) 50 or 100 sq. cm area
(B) 100 or 150 sq. cm area
(C) 100 or 200 sq. cm area
(D) 250 or 500 sq. cm area
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The specifications of most commonly used standard gauges in India, are (A) 200 sq. cm collector and 4 litres bottle (B) 100 sq. cm collector and 2 litres bottle (C) 200 sq. cm collector and 10 litres bottle (D) 100 sq. cm collector and 4 litres bottle

Description : The specifications of most commonly used standard gauges in India, are (A) 200 sq. cm collector and 4 litres bottle (B) 100 sq. cm collector and 2 litres bottle (C) 200 sq. cm collector and 10 litres bottle (D) 100 sq. cm collector and 4 litres bottle

Last Answer : Answer: Option A

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

The sum of the interior angles of a geometrical figure laid on the surface of the earth differs from that of the corresponding plane figure only to the extent of one second for every (A) 100 sq. km of area (B) 150 sq. km of area (C) 200 sq. km of area (D) None of these

Description : The sum of the interior angles of a geometrical figure laid on the surface of the earth differs from that of the corresponding plane figure only to the extent of one second for every (A) 100 sq. km of area (B) 150 sq. km of area (C) 200 sq. km of area (D) None of these

Last Answer : (C) 200 sq. km of area

In a tension test, the yield stress is 300 kg/cm2 , in the octahedral shear stress at the point is: (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm (D) 250 kg/cm2

Description : In a tension test, the yield stress is 300 kg/cm2 , in the octahedral shear stress at the point is: (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm (D) 250 kg/cm2

Last Answer : (A) 100 kg/cm2

A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on the column, should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Description : A short column 20 cm 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on ... should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Last Answer : Answer: Option B

If total run off of a basin of 50 hectares is 0.8 cm, the ordinate of Bernard's distribution graph, may be calculated by the formula (where Q is the discharge in cumecs at the given time) (A) y = 50 Q (B) y = 100 Q (C) y = 200 Q (D) y = 250 Q

Description : If total run off of a basin of 50 hectares is 0.8 cm, the ordinate of Bernard's distribution graph, may be calculated by the formula (where Q is the discharge in cumecs at the given time) (A) y = 50 Q (B) y = 100 Q (C) y = 200 Q (D) y = 250 Q

Last Answer : Answer: Option D

If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm(C) 150 cm (D) 200 cm

Description : If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option C

If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Description : If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Last Answer : Answer: Option C

Potassium content of muscle tissue in mg/100 ml is about (A) 50–100 (B) 100–150 (C) 250–400 (D) 150–200

Description : Potassium content of muscle tissue in mg/100 ml is about (A) 50–100 (B) 100–150 (C) 250–400 (D) 150–200

Last Answer : Answer : C

The insulin content of pancreas is about (A) 50–70 units (B) 100–150 units (C) 150–180 units (D) 200–250 units

Description : The insulin content of pancreas is about (A) 50–70 units (B) 100–150 units (C) 150–180 units (D) 200–250 units

Last Answer : Answer : D

For an adult male daily requirement of iodine is (A) 25–50 µg (B) 50–100 µg (C) 100–150 µg (D) 200–250 µg

Description : For an adult male daily requirement of iodine is (A) 25–50 µg (B) 50–100 µg (C) 100–150 µg (D) 200–250 µg

Last Answer : Answer : A

The amount of coproporphyrins excreted per day in feces is about (A) 10–50 µgs (B) 100–150 µgs (C) 200–250 µgs (D) 300–1000 µgs

Description : The amount of coproporphyrins excreted per day in feces is about (A) 10–50 µgs (B) 100–150 µgs (C) 200–250 µgs (D) 300–1000 µgs

Last Answer : Answer : D

Fee for availing business reply service a) Apr to Jun -100, Jul to Sep-75, Oct to Dec-50, Jan to Mar -25 b) Apr to Jun -200, Jul to Sep-150, Oct to Dec-100, Jan to Mar -50 c) Apr to Jun -250, Jul to Sep-150, Oct to Dec-75, Jan to Mar -50 d) Free of cost

Description : Fee for availing business reply service a) Apr to Jun -100, Jul to Sep-75, Oct to Dec-50, Jan to Mar -25 b) Apr to Jun -200, Jul to Sep-150, Oct to Dec-100, Jan to Mar -50 c) Apr to Jun -250, Jul to Sep-150, Oct to Dec-75, Jan to Mar -50 d) Free of cost

Last Answer : b) Apr to Jun -200, Jul to Sep-150, Oct to Dec-100, Jan to Mar -50

The chloride content of treated water for public supplies should not exceed (A) 100 ppm (B) 150 ppm (C) 200 ppm (D) 250 ppm

Description : The chloride content of treated water for public supplies should not exceed (A) 100 ppm (B) 150 ppm (C) 200 ppm (D) 250 ppm

Last Answer : (D) 250 ppm

Permissible compressive strength of M 200 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Description : Permissible compressive strength of M 200 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Last Answer : (C) 200 kg/cm2

In reinforced concrete footing on soil, the minimum thickness at edge should not be less than (A) 100 mm (B) 150 mm (C) 200 mm (D) 250 mm

Description : In reinforced concrete footing on soil, the minimum thickness at edge should not be less than (A) 100 mm (B) 150 mm (C) 200 mm (D) 250 mm

Last Answer : Answer: Option B

Permissible compressive strength of M 200 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Description : Permissible compressive strength of M 200 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Last Answer : Answer: Option C

Permissible compressive strength of M 150 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Description : Permissible compressive strength of M 150 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Last Answer : Answer: Option C

If the various concrete ingredients i.e. cement, sand and aggregates are in the ratio of 1:3:6, the grade of concrete, is (A) M 100 (B) M 150 (C) M 200 (D) M 250

Description : If the various concrete ingredients i.e. cement, sand and aggregates are in the ratio of 1:3:6, the grade of concrete, is (A) M 100 (B) M 150 (C) M 200 (D) M 250

Last Answer : Answer: Option A

The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Description : The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Last Answer : Answer: Option D

The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Description : The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Last Answer : Answer: Option D

To availing registered journals facility at least ____ regd articles has to be booked monthly a) 150 b) 200 c) 250 d) 500

Description : To availing registered journals facility at least ____ regd articles has to be booked monthly a) 150 b) 200 c) 250 d) 500

Last Answer : b) 200

Width of the shoulders of carriage way is generally kept (A) 100 cm (B) 125 cm (C) 150 cm (D) 250 cm

Description : Width of the shoulders of carriage way is generally kept (A) 100 cm (B) 125 cm (C) 150 cm (D) 250 cm

Last Answer : Answer: Option D

A thin, flat & square plate measuring 2 m × 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will remain constant at 30°C, if the convective heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Last Answer : (B) 100

The maximum permissible chloride content in treated water of public water supplies should not exceed (A) 50 P.P.M. (B) 100 P.P.M. (C) 150 P.P.M. (D) 250 P.P.M.

Description : The maximum permissible chloride content in treated water of public water supplies should not exceed (A) 50 P.P.M. (B) 100 P.P.M. (C) 150 P.P.M. (D) 250 P.P.M.

Last Answer : (D) 250 P.P.M.

Generally the strength of concrete is represented by the crushing stress of concrete cube of size [ A ] 50 mm [ B ] 100 mm [ C ] 150 mm [ D ] 250 mm

Description : Generally the strength of concrete is represented by the crushing stress of concrete cube of size [ A ] 50 mm [ B ] 100 mm [ C ] 150 mm [ D ] 250 mm

Last Answer : [ C ] 150 mm

An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 cm/hr, the maximum run-off rate based on 10 minute peak percentage of 16% from distributing graph of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Description : An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 ... of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Last Answer : Answer: Option C

Plasma zinc level is (A) 10–50 µg/dl (B) 50–150 µg/dl (C) 150–250 µg/dl (D) 250–500 µg/dl

Description : Plasma zinc level is (A) 10–50 µg/dl (B) 50–150 µg/dl (C) 150–250 µg/dl (D) 250–500 µg/dl

Last Answer : Answer : B

What is the recommended minimum range of illumination required by BS EN 970 for inspection of a welded surface? a) 90 to 125 lux b) 150 to 250 lux c) 350 to 500 lux d) 35 to 50 lux

Description : What is the recommended minimum range of illumination required by BS EN 970 for inspection of a welded surface? a) 90 to 125 lux b) 150 to 250 lux c) 350 to 500 lux d) 35 to 50 lux

Last Answer : c) 350 to 500 lux

The specifications of a cement bag for storage, are (A) Weight 50 kg (B) Height 18 cm (C) Plan area 3000 sq. cm (D) All the above

Description : The specifications of a cement bag for storage, are (A) Weight 50 kg (B) Height 18 cm (C) Plan area 3000 sq. cm (D) All the above

Last Answer : Answer: Option D

The area of a drainage basin whose axial length is 100 km is 2500 sq. km. Its form factor is (A) 0.10 (B) 0.20 (C) 0.25 (D) 0.35

Description : The area of a drainage basin whose axial length is 100 km is 2500 sq. km. Its form factor is (A) 0.10 (B) 0.20 (C) 0.25 (D) 0.35

Last Answer : Answer: Option C

Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Last Answer : (B) 60-70

The cost of 3 horses is same as the cost of 5 cows. If total cost of 4 horses and 6 rows is Rs.1900.Find the cost of one horse? a) Rs.50 b) Rs.150 c) Rs.200 d) Rs.250 e) None of these

Description : The cost of 3 horses is same as the cost of 5 cows. If total cost of 4 horses and 6 rows is Rs.1900.Find the cost of one horse? a) Rs.50 b) Rs.150 c) Rs.200 d) Rs.250 e) None of these

Last Answer : Ratio of cost of horse and cow = 1/3 : 1/5 =5 : 3 Let cost of horse and cow are 5x and 3x respectively: Then 4 × 5x +6 × 3x = Rs.1900 =>38x = 1900 => x = 1900/38 = Rs.50 Cost of one horse = 5 × Rs.50 = Rs.250 Answer: d)

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C

To prevent segregation, the maximum height for placing concrete, is (A) 100 cm (B) 125 cm (C) 150 cm (D) 200 cm

Description : To prevent segregation, the maximum height for placing concrete, is (A) 100 cm (B) 125 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option A

A rainy day as defined by the Indian Meteorological department is a day when the rainfall at a point received is (a) 0.5 mm to 1 mm in 24 hours (b) 1.1 mm to 1.5 mm in 24 hours (c) 1.6 mm to 2 mm in 24 hours (d) above 2.5 mm in 24 hours

Description : A rainy day as defined by the Indian Meteorological department is a day when the rainfall at a point received is (a) 0.5 mm to 1 mm in 24 hours (b) 1.1 mm to 1.5 mm in 24 hours (c) 1.6 mm to 2 mm in 24 hours (d) above 2.5 mm in 24 hours

Last Answer : Ans: (d)

Which one of the following organizations is responsible for publishing topographical sheets? (1) Geological Survey of India (G.S.I.) (2) National Atlas & Thematic Mapping Organisation (N.A. T. M.O.) (3) Indian Meteorological Department (I.M.D.) (4) Survey of India (S.O.I.)

Description : Which one of the following organizations is responsible for publishing topographical sheets? (1) Geological Survey of India (G.S.I.) (2) National Atlas & Thematic Mapping Organisation (N.A. T. M.O.) (3) Indian Meteorological Department (I.M.D.) (4) Survey of India (S.O.I.)

Last Answer : (4) Survey of India (S.O.I.) Explanation: The Survey of India produces a rich "base" of map information through systematic topographical surveys and the use of remote sensing images. ... . These maps provide the preliminary, information about a terrain and thus very useful for engineering works.

The headquarters of Indian Meteorological Department was established in 1875 at— (A) New Delhi (B) Hyderabad (C) Pune (D) Calcutta

Description : The headquarters of Indian Meteorological Department was established in 1875 at— (A) New Delhi (B) Hyderabad (C) Pune (D) Calcutta

Last Answer : (D) Calcutta

Indian Meteorological Department was established for the first time in— (A) At Shimla in 1875 (B) At Pune in 1928 (C) At Delhi in 1950 (D) None of these

Description : Indian Meteorological Department was established for the first time in— (A) At Shimla in 1875 (B) At Pune in 1928 (C) At Delhi in 1950 (D) None of these

Last Answer : (A) At Shimla in 1875

Indian Meteorological Department declared “Super Cyclone” (a) When the wind blows at a speed of more than 216 kmph (b) When the wind blows at a speed of more than 220 kmph (c) When the wind blows at a speed of more than 194 kmph (d) When the wind blows at a speed of more than 172 kmph

Description : Indian Meteorological Department declared “Super Cyclone” (a) When the wind blows at a speed of more than 216 kmph (b) When the wind blows at a speed of more than 220 kmph (c) When the wind blows at a speed of more than 194 kmph (d) When the wind blows at a speed of more than 172 kmph

Last Answer : (b) When the wind blows at a speed of more than 220 kmph

The nodal department for wind detection IMD refers to a) Indian meteorological department b) Indian metrological department c) Indian metallurgical department d) None of these

Description : The nodal department for wind detection IMD refers to a) Indian meteorological department b) Indian metrological department c) Indian metallurgical department d) None of these

Last Answer : a) Indian meteorological department

Which one of the following organisations is responsible for publishing topographical sheets? (1) Geological Survey of India (G.S.I.) (2) National Atlas & Thematic Mapping Organisation (N.A. T.M.O.) (3) Indian Meteorological Department (I.M.D.) (4) Survey of India (S.O.I.)

Description : Which one of the following organisations is responsible for publishing topographical sheets? (1) Geological Survey of India (G.S.I.) (2) National Atlas & Thematic Mapping Organisation (N.A. T.M.O.) (3) Indian Meteorological Department (I.M.D.) (4) Survey of India (S.O.I.)

Last Answer : Survey of India (S.O.I.)

Brinell Hardness Number (BHN) for talc is approximately in the range of (A) 1-5 (B) 20-30 (C) 100 -150 (D) 200 - 250

Description : Brinell Hardness Number (BHN) for talc is approximately in the range of (A) 1-5 (B) 20-30 (C) 100 -150 (D) 200 - 250

Last Answer : (B) 20-30

The Sun is at an average distance of about---- million kilometers away from Earth? A. 100 million B. 150 million (Answer) C. 200 million D. 250 million

Description : The Sun is at an average distance of about---- million kilometers away from Earth? A. 100 million B. 150 million (Answer) C. 200 million D. 250 million

Last Answer : B. 150 million (Answer)

The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm. Assume the acceleration due to gravity g = 10 m/s^2. The natural frequency of this spring-mass system (in rad/s) is A 100 B 150 C 200 D 250

Description : The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm. Assume the acceleration due to gravity g = 10 m/s^2. The natural frequency of this spring-mass system (in rad/s) is A 100 B 150 C 200 D 250

Last Answer : A 100

Root formation is promoted in softwood cuttings under light intensity of __________ foot candles: a. 100-150 b. 150-200 c. 200-250 d. 250-350

Description : Root formation is promoted in softwood cuttings under light intensity of __________ foot candles: a. 100-150 b. 150-200 c. 200-250 d. 250-350

Last Answer : 150-200

The weight of the puddler is —— A. 150-200 kg. C. 100-150 kg B. 30-40 kg D. 200-250 kg

Description : The weight of the puddler is —— A. 150-200 kg. C. 100-150 kg B. 30-40 kg D. 200-250 kg

Last Answer : 30-40 kg

Children education allowance is exempt up to per month per child for two children. A) Rs.100 B) Rs.150 C) Rs.200 D) Rs.250

Description : Children education allowance is exempt up to per month per child for two children. A) Rs.100 B) Rs.150 C) Rs.200 D) Rs.250

Last Answer : A) Rs.100

One carat of diamond is equal to (1) 100 mg (2) 150 mg (3) 200 mg (4) 250 mg

Description : One carat of diamond is equal to (1) 100 mg (2) 150 mg (3) 200 mg (4) 250 mg

Last Answer : 200 mg

The Young's modulus of elasticity of steel, is (A) 150 KN/mm2 (B) 200 KN/mm2 (C) 250 KN/mm2 (D) 275 KN/mm

Description : The Young's modulus of elasticity of steel, is (A) 150 KN/mm2 (B) 200 KN/mm2 (C) 250 KN/mm2 (D) 275 KN/mm

Last Answer : Answer: Option D