Description : the time taken to plough one acre farm with 35 hp tractor is : A)60 minutes b)75 minutes C)90 minutes d)120 minutes
Last Answer : b)75 minutes
Description : Connecting rod of two stroke engine is subjected to A. Compressive load B. Tensile load C. Both compressive and tensile load D. None of the above
Last Answer : A. Compressive load
Description : Connecting rod of four stroke engine is subjected to A. Compressive load B. Tensile load C. Both compressive and tensile load D. None of the above
Last Answer : C. Both compressive and tensile load
Description : Firing order of a six cylinder engine in which no two adjacent cylinder have power stroke is (a) 1 5 3 6 2 4 (b) 1 2 3 4 5 6 (c) 1 5 4 6 3 2 (d) 1 4 2 5 6 3
Last Answer : (a) 1 5 3 6 2 4
Description : hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder
Last Answer : (b) number of power stroke per minute for all cylinders
Description : which of the following tractor has the cair cooled engine? A)ford b)eicher C)international d)hmt
Last Answer : b)eicher
Description : GOOD EARTH is one of the important make of (A) tractor (B) electric motor (C) diesel engine (D)power tiller
Last Answer : A) tractor
Description : onstant speed governors are used on ∙ Tractor engine diesel ∙ Stationary diesel engine ∙ Petrol engine ∙ None of the above
Last Answer : Stationary diesel engine
Description : variable speed governors are used on ∙ Tractor engine(diesel) ∙ Stationary engine (diesel) ∙ Petrol engine ∙ None of the above
Last Answer : ∙ Tractor engine(diesel)
Description : subsoilers are operated at maximum depth of: A.30-40cm B.45-75cm C.75-90cm D.10-20cm
Last Answer : B.45-75cm
Description : Suggested or recommended difference in mass to power ratio between ballasted and unballasted tractor is of the order a)10kg/PTO KW b)6kg/PTO kw c)20kg/PTO kw d)30kg/PTO kw
Last Answer : b)6kg/PTO kw
Description : Injection pressure of fuel nozzle in diesel engine is a) 30-45 kg/cm2 b) 50-100 kg/cm2 c) 120-200 kg/cm2 d) 200 kg/cm2
Last Answer : c) 120-200 kg/cm2
Description : Volumetric efficiency is affected by (A) Turbulence velocity and temperature of intake manifold (B) Efficiency of exhaust stroke (C) Valve timing overlap (D) All the above
Last Answer : (D) All the above
Description : 346- Side deflection of stalk can be minimized by.... (a) Having a short cutting stroke (b) Having an arrangement to obtain two cuts per stroke (c) Both (a) & (b) (d) None of the above
Last Answer : (c) Both (a) & (b)
Description : Formula for adding weight (ballast) on tractor tyres working in loose wet soil for good traction a)(km/hr × kg/PTO kw)=540 b)( km/hr × kg/PTO kw)=670 c)( km/hr × kg/PTO HP)=540 d)( km/hr × kg/PTO HP)=670
Last Answer : a)(km/hr × kg/PTO kw)=540
Description : Swinging drawbar is advantageous because it help A. Taking short turn with machine wider than the tractor B. Reduces side draft C. Leaves only small area uncovered at corner of the fied D. All the above
Last Answer : A. Taking short turn with machine wider than the tractor
Description : The cutter bar of a tractor operated mower ordinarily makes: A. Near the front axis B. 40mm towards the real axis C. At the power take off shaft D. Between the two lower Links
Last Answer : D. Between the two lower Links
Description : .Increase length of a land slide of a one bottom right hand mould board plough will a) Increase the amount of offset on tractor b) Decrease the amount of offset c) No affect d) Affect Completely
Last Answer : c) No affect
Description : ASPEE are famous for manufacturing: a) Tractor b) Power tillers c) Ploughs d) Sprayers
Last Answer : d) Sprayers
Description : The first tractor plant in india was set up by : A)hindustan b)hmt C)eicher d)ford
Last Answer : C)eicher
Description : Normal consumption of fuep in ltrs/hr. by a 35hp tractor is (A) 2.5 (B)3.0 (C)3.5 (D)4
Last Answer : (B)3.0
Description : The use of tractor is considered economical when it is utilised for (A) 800hrs/year (B)1000hrs/year (C)1200hrs/year (D)1400hrs/year
Last Answer : (B)1000hrs/year
Description : .An olpad thresher is operated (A) Manually (B)By a pair of Bullocks (C)By a tractor (D)By an electric motor
Last Answer : (B)By a pair of Bullocks
Description : The sound level of an agricultural tractor should not exceed : I. 110 dB J. 100 dB K. 90 dB L. 80 dB
Last Answer : K. 90 dB
Description : The method which depreciates the tractor or machine to zero at the end of its expected life is known as: A. Estimated value B. Sum-of-the digits C. Declining balance D. Straight line
Last Answer : D. Straight line
Description : The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min
Last Answer : A. 800-1200 strokes/min
Description : Recommended capacity of the seed box or hopper for tractor mounted (large size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit
Last Answer : d. 200-300 lit
Description : Recommended capacity of the seed box or hopper for tractor mounted(small size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit
Last Answer : c. 100-150 lit
Description : enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m
Last Answer : (a) 1.5-3.0m
Description : The maximum non-verticality of the bore of a well 200 m deep, may be permitted up to (A) 25 cm (B) 50 cm (C) 75 cm (D) 100 cm
Last Answer : (D) 100 cm
Description : Which of the following parameters are not required for evaluating volumetric efficiency of the compressor? a) Power b) Cylinder bore diameter c) Stroke length d) FAD
Last Answer : a) Power
Description : Flooding nozzle have spray angle a) 100-150 b) 90-100 c) 60-95 d) 30-45
Last Answer : a) 100-150
Description : A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00
Last Answer : (D) 1.00
Description : In a morse test for a 2 cylinder, 2 S SI engine, the brake power was 9 kW. Whereas the brake power of individual cylinders with spark cut off were 4.25 kW and 3.75 kW. The mecheffic of the engine is (a) 90% (b) 80% (c) 45.5% (d) 52.5%
Last Answer : Ans :a
Description : Superchargers are driven by A. Electric current from the battery B. Exhaust gases from engine C. Direct connection with the engine power D. None of the above
Last Answer : C. Direct connection with the engine power
Description : Turbo chargers are driven by A. Direct connection with engine power B. Exhaust gases from engine C. Electric current from the battery D. None of the above
Last Answer : B. Exhaust gases from engine
Description : Turbo chargers or super chargers increases engine power by A. 10-20% C. 50-60% B. 20-30% D. 90-100%
Last Answer : A. 10-20%
Description : .When the valves are carried in engine bioel at one side of each cylinder is called A. Valves in head arrangements B. L-head C. I-head D. None of the above
Last Answer : B. L-head
Description : Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at ... deliver current to the battery or to the lightening and ignition circuit. D. None of the above
Last Answer : A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces.
Description : A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm
Last Answer : a.500 rpm
Description : Rated speed of an engine is the speed at which an engine devlopes (A) Maximum crankshaft torque (B) Maximum brake horse power output (C) Maximum thermal efficiency (D) Maximum drawback pull
Last Answer : (B) Maximum brake horse power output
Description : Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above
Last Answer : Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above
Description : An engine is called I or valve in head engine when a) Valve are immediately above the cylinder b) Both valves are on one side c) Both valves are on opposite direction d) None of the above
Last Answer : d) None of the above
Description : The estimated useful life of diesel engine is: A)8 years b)10 years C)12 years d)14years
Last Answer : b)10 years
Description : iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above
Last Answer : ∙ Torque is a function of thermal efficiency
Description : 40 optimum working temperature for diesel engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c
Last Answer : ∙ 88-90°c
Description : ptimum working temperature for petrol engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c
Last Answer : ∙ 71-82°c
Description : Compression pressure in petrol engine cylinder is a) 6-10 kg/cm2 b) 10-20 kg/cm2 c) 20-35 kg/cm2 d) 35-40 kg/cm2
Last Answer : a) 6-10 kg/cm2
Description : Compression pressure in diesel engine cylinder is a) 6-10 kg/cm2 b) 10-20 kg/cm2 c) 20-35 kg/cm2 d) None of the above
Last Answer : c) 20-35 kg/cm2
Description : High speed diesel A) is used on high speed engine B) has lower fule value then l.s.d per litre. C)both (a) & (b) D)none of the above
Last Answer : C)both (a) & (b)