Catalytic hydrogenation of 3-methyl-1-butene gives : (a) Isobutane (b) 2,2-Dimethylbutane (c) 2-Methylbutane (d) 2,3-Dimethylbutane

Catalytic hydrogenation of 3-methyl-1-butene gives :
(a) Isobutane
(b) 2,2-Dimethylbutane
(c) 2-Methylbutane
(d) 2,3-Dimethylbutane
by

1 Answer

Answer :

2-Methylbutane
by

Related questions

2,3-Dimethyl-2-butene undergoes catalytic hydrogenation to give (a) 2,3-Dimethylbutane (b) 2-Methylpentane (c) 2,2-Dimethylbutane (d) 3-Methylpentane

Description : 2,3-Dimethyl-2-butene undergoes catalytic hydrogenation to give (a) 2,3-Dimethylbutane (b) 2-Methylpentane (c) 2,2-Dimethylbutane (d) 3-Methylpentane

Last Answer : 2,3-Dimethylbutane

2-Butyne undergoes catalytic hydrogenation in the presence of Lindlar's catalyst to give (a) 2-Butene (b) Butane (c) 1-Butene (d) 2-Methylpropene

Description : 2-Butyne undergoes catalytic hydrogenation in the presence of Lindlar's catalyst to give (a) 2-Butene (b) Butane (c) 1-Butene (d) 2-Methylpropene

Last Answer : 2-Butene

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

A hydrocarbon, C6H12, on ozonolysis gives only one product which does not give silver mirror with Tollens' reagent. The hydrocarbon is (a) 2,3-Dimethyl-2-butene (b) 2-Hexene (c) 2-Methyl-2-pentene (d) 3-Hexene

Description : A hydrocarbon, C6H12, on ozonolysis gives only one product which does not give silver mirror with Tollens' reagent. The hydrocarbon is (a) 2,3-Dimethyl-2-butene (b) 2-Hexene (c) 2-Methyl-2-pentene (d) 3-Hexene

Last Answer : 2,3-Dimethyl-2-butene

Which of the following alkenes will give a mixture of acetone and acetaldehyde an ozonolysis? (a) 1-butene (b) 2-methyl-2-butene (c) 2-butene (d) 2-methylpropene

Description : Which of the following alkenes will give a mixture of acetone and acetaldehyde an ozonolysis? (a) 1-butene (b) 2-methyl-2-butene (c) 2-butene (d) 2-methylpropene

Last Answer : 2-methyl-2-butene

Which of the following alkenes will give a mixture of acetone and formaldehyde on ozonolysis? (a) 2-butene (b) 2-methyl-2-butene (c) 1-butene (d) 2-methylpropene

Description : Which of the following alkenes will give a mixture of acetone and formaldehyde on ozonolysis? (a) 2-butene (b) 2-methyl-2-butene (c) 1-butene (d) 2-methylpropene

Last Answer : 2-methylpropene

2-Methyl-2-butene reacts with HBr in the presence of peroxide to give (a) A primary alkyl bromide (b) A secondary alkyl bromide (c) A tertiary alkyl bromide (d) A vicinal dibromide

Description : 2-Methyl-2-butene reacts with HBr in the presence of peroxide to give (a) A primary alkyl bromide (b) A secondary alkyl bromide (c) A tertiary alkyl bromide (d) A vicinal dibromide

Last Answer : A secondary alkyl bromide

The major product of acid-catalyzed dehydration of 3-pentanol is : (a) 1-Pentene (b) 2-Methyl-1-butene (c) 2-Pentene(d) 3-Methyl-1-butene

Description : The major product of acid-catalyzed dehydration of 3-pentanol is : (a) 1-Pentene (b) 2-Methyl-1-butene (c) 2-Pentene (d) 3-Methyl-1-butene

Last Answer : 2-Pentene

Which of the following compounds exhibit geometrical isomerism? (a) 1-Pentene (b) 2-Methyl-2-pentene (c) 2-Pentene (d) 2-Methyl-2-butene

Description : Which of the following compounds exhibit geometrical isomerism? (a) 1-Pentene (b) 2-Methyl-2-pentene (c) 2-Pentene (d) 2-Methyl-2-butene

Last Answer : 2-Pentene

The hydrolysis of 2-bromo-3-methylbutane by `S_(N^(1))` mechanism gives meinly:

Description : The hydrolysis of 2-bromo-3-methylbutane by `S_(N^(1))` mechanism gives meinly:

Last Answer : The hydrolysis of 2-bromo-3-methylbutane by `S_(N^(1))` mechanism gives meinly: A. 3-methyl-2- ... . 2,2-dimethyl-2-propanol D. 2-methyl-1-butanol

A chiral `C_(5)H_(10)O` alcohol is reduced by catalytic hydrogenation to an achiral `C_(5)H_(12)O` alcohol. The original alcohol is oxidized by activa

Description : A chiral `C_(5)H_(10)O` alcohol is reduced by catalytic hydrogenation to an achiral `C_(5)H_(12)O` alcohol. The original alcohol is oxidized by activa

Last Answer : A chiral `C_(5)H_(10)O` alcohol is reduced by catalytic hydrogenation to an achiral `C_(5)H_(12)O` alcohol ... -2-buten-1-ol D. 2-methyl-2-buten-1-ol

Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

The reaction of 1-butene with bromine, Br2, in aqueous solution gives primarily 1-bromo-2-butanol. Identify the nucleophilic species in the reaction. (a) Br2 (b) Br– (c) H2O (d) HOBr

Description : The reaction of 1-butene with bromine, Br2, in aqueous solution gives primarily 1-bromo-2-butanol. Identify the nucleophilic species in the reaction. (a) Br2 (b) Br– (c) H2O (d) HOBr

Last Answer : H2O

Which of the following alkenes gives only acetic acid on oxidation with hot concentrated KMnO4. (a) Ethylene (b) 1-Butene (c) Propene (d) 2-Butene

Description : Which of the following alkenes gives only acetic acid on oxidation with hot concentrated KMnO4. (a) Ethylene (b) 1-Butene (c) Propene (d) 2-Butene

Last Answer : 2-Butene

The dehydrohalogenation of 2-bromobutane with alcoholic KOH gives mainly (a) 2-Butene (b) 2-Butyne (c) 1-Butene (d) 1-Butyne

Description : The dehydrohalogenation of 2-bromobutane with alcoholic KOH gives mainly (a) 2-Butene (b) 2-Butyne (c) 1-Butene (d) 1-Butyne

Last Answer : 2-Butene

Partial hydrogenation of vegetable oils in the presence of Ni catalyst at 200°C gives (a) Vanaspati ghee (b) Margarine (c) Both of these (d) None of these

Description : Partial hydrogenation of vegetable oils in the presence of Ni catalyst at 200°C gives (a) Vanaspati ghee (b) Margarine (c) Both of these (d) None of these

Last Answer : Vanaspati ghee

Consider the three isomeric alkanes n-hexane, 2,3-dimethylbutane, and 2- methylpentane. Which of the following correctly lists these compounds in order of increasing boiling point? (a) 2,3-dimethylbutane < 2-methylpentane < n-hexane (b) 2-methylpentane < n-hexane < 2,3-dimethylbutane (c) 2-methylpentane < 2, 3-dimethylbutane < n-hexane (d) n-hexane < 2-methylpentane < 2,3-dimethylbutane

Description : Consider the three isomeric alkanes n-hexane, 2,3-dimethylbutane, and 2- methylpentane. Which of the following correctly lists these compounds in order of increasing boiling point? (a) 2,3-dimethylbutane < 2- ... < 2, 3-dimethylbutane < n-hexane (d) n-hexane < 2-methylpentane < 2,3-dimethylbutane

Last Answer : 2,3-dimethylbutane < 2-methylpentane < n-hexane

How many monochlorination products are possible in the reaction of 2,2- dimethylbutane with chlorine in the presence of ultraviolet light? (a) 2 (b) 3 (c) 4 (d) 5

Description : How many monochlorination products are possible in the reaction of 2,2- dimethylbutane with chlorine in the presence of ultraviolet light? (a) 2 (b) 3 (c) 4 (d) 5

Last Answer : 2

Out of pentane, 2-methylbutane and 2,2-dimethylpropane which has the highest boiling point and why?

Description : Out of pentane, 2-methylbutane and 2,2-dimethylpropane which has the highest boiling point and why?

Last Answer : Ans. Pentane having a continuous chain of five carbon atoms has the highest boiling point (309.1K) whereas 2,2 - dimethylpropane boils at 282.5K. With increase in number ... and therefore weak intermolecular forces between spherical molecules, which are overcome at relatively lower temperatures

Which of the alkyl chlorides listed below undergoes dehydrohalogenation inthe presence of a strong base to give 2-pentene as the only alkene product?(a) 1-chloropentane(b) 2-chloropentane(c) 3-chloropentane(d) 1-chloro-2-methylbutane

Description : Which of the alkyl chlorides listed below undergoes dehydrohalogenation in the presence of a strong base to give 2-pentene as the only alkene product? (a) 1-chloropentane (b) 2-chloropentane (c) 3-chloropentane (d) 1-chloro-2-methylbutane

Last Answer : 3-chloropentane

Which of the alkyl chlorides listed below undergoes dehydrohalogenation in the presence of a strong base to give 2-pentene as the only alkene product? (a) 1-chloropentane (b) 2-chloropentane (c) 3-chloropentane (d) 1-chloro-2-methylbutane

Description : Which of the alkyl chlorides listed below undergoes dehydrohalogenation in the presence of a strong base to give 2-pentene as the only alkene product? (a) 1-chloropentane (b) 2-chloropentane (c) 3-chloropentane (d) 1-chloro-2-methylbutane

Last Answer : 3-chloropentane

Which compound is not an isomer of the other three? (a) n-Pentane (b) 2,2-Dimethylpropane (c) 2-Methylbutane

Description : Which compound is not an isomer of the other three? (a) n-Pentane (b) 2,2-Dimethylpropane (c) 2-Methylbutane

Last Answer : 2,3-Dimethylbutane

The biogas used for cooking is a mixture of which of the following? (1) Carbon dioxide and oxygen (2) Isobutane and propane (3) Methane and Carbon monoxide (4) Methane and carbon dioxide

Description : The biogas used for cooking is a mixture of which of the following? (1) Carbon dioxide and oxygen (2) Isobutane and propane (3) Methane and Carbon monoxide (4) Methane and carbon dioxide

Last Answer : (4) Methane and carbon dioxide Explanation: Biogas is essentially a mixture of Methane (CH4, around 55-75%) but also contains Carbon Dioxide (CO3), around 25- 30%), varying quantities of Water ( ... ) and Carbon Monoxide (CO). Methane is the valuable component under the aspect of using biogas fuel.

The major constituent of gobar gas is – (1) Carbon dioxide (2) Methane (3) Butane (4) Isobutane

Description : The major constituent of gobar gas is – (1) Carbon dioxide (2) Methane (3) Butane (4) Isobutane

Last Answer : (2) Methane Explanation: lobar Gas (Methane) is generated by the decomposition of organic cow dung. It consists of 55-65% methane, 30-35% carbon dioxide, with some hydrogen, nitrogen ... upon the origin of the anaerobic digestion process. Landfill gas typically has methane concentrations around 50%.

Neoprene is a polymer of the following monomer (a) Chloroprene (b) Isoprene(c) Isobutane(d) Isopentene

Description : Neoprene is a polymer of the following monomer (a) Chloroprene (b) Isoprene (c) Isobutane (d) Isopentene

Last Answer : Chloroprene

2-Methylpropene reacts with HBr to give (a) tert-Butyl bromide (b) Isobutane (c) n-Butyl bromide (d) None of these

Description : 2-Methylpropene reacts with HBr to give (a) tert-Butyl bromide (b) Isobutane (c) n-Butyl bromide (d) None of these

Last Answer : tert-Butyl bromide

LPG (Household cooking gas) is mainly a mixture of (a) Methane + Ethane (b) Acetylene + O2 (c) Butane + Isobutane (d) Acetylene + H2

Description : LPG (Household cooking gas) is mainly a mixture of (a) Methane + Ethane (b) Acetylene + O2 (c) Butane + Isobutane (d) Acetylene + H2

Last Answer : Butane + Isobutane

The biogas used for cooking is a mixture of which of the following ? (1) Carbon dioxide and oxygen (2) Isobutane and propane (3) Methane and carbon monoxide (4) Methane and carbon dioxide

Description : The biogas used for cooking is a mixture of which of the following ? (1) Carbon dioxide and oxygen (2) Isobutane and propane (3) Methane and carbon monoxide (4) Methane and carbon dioxide

Last Answer :  Methane and carbon dioxide

Domestic cooking gas consists mostly of (1) methane and ethane (2) liquified butane and isobutane (3) hydrogen and acetylene (4) ethylene and carbon monoxide

Description : Domestic cooking gas consists mostly of (1) methane and ethane (2) liquified butane and isobutane (3) hydrogen and acetylene (4) ethylene and carbon monoxide

Last Answer : liquified butane and isobutane

The major constituent of gobar gas is (1) Carbon dioxide (2) Methane (3) Butane (4) Isobutane

Description : The major constituent of gobar gas is (1) Carbon dioxide (2) Methane (3) Butane (4) Isobutane

Last Answer : Methane

Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Description : Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Last Answer : (A) Formaldehyde

In the Newman projection for `2,2`- dimethylbutane `X` and `Y` can, respectively, be

Description : In the Newman projection for `2,2`- dimethylbutane `X` and `Y` can, respectively, be

Last Answer : In the Newman projection for `2,2`- dimethylbutane `X` and `Y` can, respectively, be A. H and H B. H and ` ... 2)H_(5)` and H D. `CH_(3) and CH_(3)`

In the Newman projection for `2,2`- dimethylbutane `X` and `Y` can, respectively, be

Description : In the Newman projection for `2,2`- dimethylbutane `X` and `Y` can, respectively, be

Last Answer : In the Newman projection for `2,2`- dimethylbutane `X` and `Y` can, respectively, be A. H and H B. H and ` ... 2)H_(5)` and H D. `CH_(3) and CH_(3)`

The newman projection formula of 2-3, dimethylbutane is given as X,Y respectively can be:

Description : The newman projection formula of 2-3, dimethylbutane is given as X,Y respectively can be:

Last Answer : The newman projection formula of 2-3, dimethylbutane is given as X,Y respectively can be: A. `-CH(CH_(3))_(2) " ... )` D. `H" and " -CH(CH_(3))_(2)`

The R/S designation for the following stereoisomers of 1,3-Dibromo-2-methylbutane is :

Description : The R/S designation for the following stereoisomers of 1,3-Dibromo-2-methylbutane is :

Last Answer : The R/S designation for the following stereoisomers of 1,3-Dibromo-2-methylbutane is : A. 2R, 3R B. 2R, 3S C. 2S, 3R D. 2S, 3S

The R/S designation for the following stereoisomers of 1,3-Dibromo-2-methylbutane is :

Description : The R/S designation for the following stereoisomers of 1,3-Dibromo-2-methylbutane is :

Last Answer : The R/S designation for the following stereoisomers of 1,3-Dibromo-2-methylbutane is : A. 2R, 3R B. 2R, 3S C. 2S, 3R D. 2S, 3S

Isobutane What ?

Last Answer : isobutane Yes Natural Of gas A One of them Material.Natural In gas Of Amount 4 Percent.

Methyl benzoate on hydrolysis gives (a) Acetic acid (b) Benzoic acid (c) Picric acid (d) Phenylacetic acid

Description : Methyl benzoate on hydrolysis gives (a) Acetic acid (b) Benzoic acid (c) Picric acid (d) Phenylacetic acid

Last Answer : Benzoic acid

Benzoyl chloride on basic-hydrolysis (NaOH/H2O) gives : (a) Benzoic acid (b) Methyl benzoate (c) Sodium benzoate (d) Ethyl benzoate

Description : Benzoyl chloride on basic-hydrolysis (NaOH/H2O) gives : (a) Benzoic acid (b) Methyl benzoate (c) Sodium benzoate (d) Ethyl benzoate

Last Answer : Sodium benzoate

Which of the following statements is false about toluene? (a) can be prepared by treating benzene with methyl chloride in the presence of AlCl3. (b) is converted to benzoic acid on refluxing with acidic KMnO4 solution. (c) on refluxing with concentrated H2SO4 gives a mixture of ortho and para toluenesulfonic acid. (d) can be nitrated with concentrated nitric acid to give a mixture of ortho and meta nitrotoluene.

Description : Which of the following statements is false about toluene? (a) can be prepared by treating benzene with methyl chloride in the presence of AlCl3. (b) is converted to benzoic acid on refluxing with ... (d) can be nitrated with concentrated nitric acid to give a mixture of ortho and meta nitrotoluene.

Last Answer : can be nitrated with concentrated nitric acid to give a mixture of ortho and meta nitrotoluene

. Acetamide on heating with P2O5 gives : (a) Methylamine (b) Ethylamine (c) Methyl cyanide (d) None of these

Description : Acetamide on heating with P2O5 gives : (a) Methylamine (b) Ethylamine (c) Methyl cyanide (d) None of these

Last Answer : Methyl cyanide

Diethyl ether on heating with excess concentrated HI gives (a) Methyl iodide (b) Isopropyl iodide (c) Ethyl iodide (d) n-Propyl iodide

Description : Diethyl ether on heating with excess concentrated HI gives (a) Methyl iodide (b) Isopropyl iodide (c) Ethyl iodide (d) n-Propyl iodide

Last Answer : Ethyl iodide

Hydroboration-oxidation of 2-Methylpropene gives (a) 2-Methyl-2-propanol (b) 1,2,3-Propanetriol (c) 2-Methyl-1-propanol (d) 1,2-Propanediol

Description : Hydroboration-oxidation of 2-Methylpropene gives (a) 2-Methyl-2-propanol (b) 1,2,3-Propanetriol (c) 2-Methyl-1-propanol (d) 1,2-Propanediol

Last Answer : 2-Methyl-1-propanol

Addition of HCl to 3-methyl-1-pentene gives two products. One of these is 2-chloro-3-methylpentane. What is the other product? (a) 1-Chloro-3-methylpentane (b) 3-Chloro-3-methylpentane (c) 3-Chloro-2-methylpentane (d) 2-Chloro-2-methylpentane

Description : Addition of HCl to 3-methyl-1-pentene gives two products. One of these is 2-chloro-3-methylpentane. What is the other product? (a) 1-Chloro-3-methylpentane (b) 3-Chloro-3-methylpentane (c) 3-Chloro-2-methylpentane (d) 2-Chloro-2-methylpentane

Last Answer : 3-Chloro-3-methylpentane

Hydration of 2-methyl-1-propene (with H2O/H2SO4) gives : (a) CH3CH2CH2OH (b) (CH3)3COH (c) CH3CH2CH2CH2OH (d) (CH3)2CHOH

Description : Hydration of 2-methyl-1-propene (with H2O/H2SO4) gives : (a) CH3CH2CH2OH (b) (CH3)3COH (c) CH3CH2CH2CH2OH (d) (CH3)2CHOH

Last Answer : (CH3)3COH

An organic compound (A) on reduction gives a compound (B) which on reaction with `CHCI_(3)` and `NaOH` form (C). The compound (C) on catalytic reducti

Description : An organic compound (A) on reduction gives a compound (B) which on reaction with `CHCI_(3)` and `NaOH` form (C). The compound (C) on catalytic reducti

Last Answer : An organic compound (A) on reduction gives a compound (B) which on reaction with `CHCI_(3)` and `NaOH` form (C ... . The compound (A) is: A. B. C. D.

In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Low final boiling point product

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol