Description : Maleic anhydride is produced by catalytic oxidation of (A) Toluene (B) Ethyl alcohol (C) Naphthalene (D) Benzene
Last Answer : (D) Benzene
Description : Dehydrogenation of Isopropanol produces (A) Propyl alcohol (B) Acetone (C) Trichloroethylene (D) Formaldehyde
Last Answer : (B) Acetone
Description : Acetone is produced by catalytic dehydrogenation of (A) Phenol (B) Naphthalene (C) Isopropanol (D) Ethyl benzene
Last Answer : (C) Isopropanol
Description : Catalytic oxidation of naphthalene produces (A) Styrene (B) Phenol (C) Phthalic anhydride (D) None of these
Last Answer : (C) Phthalic anhydride
Description : Bisphenol A is produced by the condensation of acetone with (A) Formaldehyde (B) Ethyl alcohol (C) Diethyl ether (D) Phenol
Last Answer : (D) Phenol
Description : Aspirin is produced by heating salicylic acid with (a) acetic anhydride in the presence of phosphoric acid (b) benzoic anhydride in the presence of phosphoric acid (c) methyl alcohol in the presence of sulfuric acid (d) phenol in the presence of sulfuric acid
Last Answer : acetic anhydride in the presence of phosphoric acid
Description : Catalyst used in the oxidation of benzene to produce Maleic anhydride is (A) V2O5 (B) Pt (C) Ni (D) Cr
Last Answer : (A) V2O5
Description : Phthalic anhydride is made by the (A) Oxidation of naphthalene (B) Oxidation of benzene (C) Dehydrogenation of ethyl benzene (D) None of these
Last Answer : (A) Oxidation of naphthalene
Description : Catalytic oxidation of toluene produces (A) Styrene (B) Phenol (C) Benzene (D) Tri-nitro-toluene
Last Answer : (B) Phenol
Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material
Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine
Description : Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid
Last Answer : (A) Styrene
Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch
Last Answer : (A) Catalytic dehydrogenation of ethyl benzene
Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch
Description : __________ is produced by the dehydrogenation of ethyl benzene. (A) Styrene (B) Ethyl alcohol (C) Cumene (D) Phenol
Description : Which of the following alkenes will give a mixture of acetone and formaldehyde on ozonolysis? (a) 2-butene (b) 2-methyl-2-butene (c) 1-butene (d) 2-methylpropene
Last Answer : 2-methylpropene
Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol
Last Answer : (A) Adipic acid and Hexamethylene diamine
Description : Nylon-6 is manufactured from (A) Caprolactam (B) Adipic acid and Hexamethylenediamine (C) Maleic anhydride and Hexamethylenediamine (D) Sebacic acid and Hexamethylenediamine
Last Answer : (A) Caprolactam
Description : Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron
Last Answer : (B) Vinyl chloride
Description : Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)
Last Answer : (C) Either (A) or (B)
Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol
Last Answer : (A) Hexamethylene diamine and adipic acid
Description : Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid
Description : Which of the following compounds will react with methylmagnesium iodide followed by acid-hydrolysis to give ethyl alcohol? (a) Ethylene (b) Acetaldehyde (c) Formaldehyde (d) Acetone
Last Answer : Formaldehyde
Description : Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde
Last Answer : (B) Phenol & formaldehyde
Description : Fourdrinier machine is used in the manufacture of (A) Sugar (B) Paper (C) Alcohol from molasses (D) Phenol formaldehyde
Last Answer : (B) Paper
Description : Which of the following mixtures does not form an azeotrope at atmospheric pressure? (A) Water-alcohol (B) Methyl alcohol-acetone (C) Butyl acetate-water (D) None of these
Last Answer : (D) None of these
Description : Lecithins are soluble in ordinary solvents except (A) Benzene (B) Ethyl alcohol (C) Methyl alcohol (D) Acetone
Last Answer : Answer : D
Description : When formaldehyde and potassium hydroxide are heated, we get (1) Acetylene (2) Methyl alcohol (3) Methane (4) Ethyl formate
Last Answer : Methyl alcohol
Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base
Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene
Description : Commercially ethylene is produced from naphtha by (A) Catalytic cracking (B) Catalytic dehydrogenation (C) Pyrolysis (D) Hydrocracking
Last Answer : (D) Hydrocracking
Description : Which of the following is used to denature ethanol? (1) Methyl alcohol (2) Propyl alcohol (3) Phenol (4) Methane
Last Answer : (1) Methyl alcohol Explanation: Denatured alcohol is ethanol that has additives to make it undrinkable (poisonous), to discourage recreational consumption. Different additives are used to make it difficult. to ... both because its boiling point is close to that of ethanol and because it is toxic.
Description : Which of the following is used to denature ethanol ? (1) Methyl alcohol (2) Propyl alcohol (3) Phenol (4) Methane
Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98
Last Answer : (D) 98
Description : The conversion of secondary alcohol to ketones in presence of aluminium isopropoxide and acetone as solvent is? a. Canizarro reaction b. Oppenauer oxidation c. Suzuki reaction d. Aldol Condensation
Last Answer : b. Oppenauer oxidation
Description : Identify the hydrocarbon which on ozonolysis gives :- (a) Only acetone (b) 1 equivalent of propanal + 1 equivalent of formaldehyde (c ) 1 equivalent o
Last Answer : Identify the hydrocarbon which on ozonolysis gives :- (a) Only acetone (b) 1 equivalent of ... 1 equivalent of acetone + 1 equivalent of acetaldehyde
Description : Chemical name of vinegar is - (1) Acetone (2) Acetic acid (3) Formaldehyde (4) Ethanol
Last Answer : (2) Acetic acid Explanation: Vinegar is roughly 3-9% acetic acid CH3COOH) by volume, making acetic acid the main component of vinegar apart from water. The acetic acid is produced by the fermentation of ethanol by acetic acid bacteria. Vinegar is mainly used as a cooking ingredient, or in pickling.
Description : Which of the following compounds will give a positive test with Fehling's solution? (a) Formaldehyde (b) Acetone (c) Ethyl acetate (d) Acetic acid
Description : Acetylene reacts with water in the presence of sulfuric acid and mercuric sulfate to give (a) Acetone (b) Acetic acid (c) Formaldehyde (d) Acetaldehyde
Last Answer : Acetaldehyde
Description : Which of the following is a planar molecule? (a) Formaldehyde (b) Acetone (c) Formic acid (d) Acetic acid
Description : Chemical name of vinegar is (1) Acetone (2) Acetic acid (3) Formaldehyde (4) Ethanol
Last Answer : Acetic acid
Description : Cumene is the starting material for the production of (A) Benzoic acid (B) Phenol and acetone (C) Isoprene (D) Styrene
Last Answer : (B) Phenol and acetone
Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer
Last Answer : (B) Employs condensation polymerisation
Description : In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides
Last Answer : (A) Cross linked polystyrene
Description : Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics
Last Answer : (A) Decorative paint
Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66
Last Answer : (B) Bakelite
Description : Which of the following is an elastomer? (A) Thiokol (B) Phenol formaldehyde (C) Urea formaldehyde (D) Polystyrene
Last Answer : (A) Thiokol
Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a crosslinked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6
Last Answer : (A) Bakelite (phenol formaldehyde)
Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)
Last Answer : (C) Polychlorophrene
Description : Condensation polymerisation of formaldehyde with __________ does not produce phenolic resin. (A) Resorcinol (B) Phenol (C) Para-cresol (D) Melamine
Last Answer : (D) Melamine
Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Polytetrafluroethylene (PTFE) (D) A monomer
Last Answer : (C) Polytetrafluroethylene (PTFE)
Description : Cation exchange resins (0.3 to 1 mm size) used in water treatment is prepared from __________ resins. (A) Epoxy (B) Phenol formaldehyde (C) Urea formaldehyde (D) Melamine formaldehyde
Last Answer : (C) Urea formaldehyde