In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

In catalytic alkylation, higher iso-butane to olefin ratio gives
(A) Low final boiling point product
(B) Higher yield
(C) Both (A) and (B)
(D) Neither (A) nor (B
by

1 Answer

Answer :

(A) Low final boiling point product
by

Related questions

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Alkylation (A) Causes olefins to combine with each other(B) Causes olefins to combine with iso-paraffins(C) Converts iso-paraffin into olefin(D) Converts olefin into paraffin

Description : Alkylation (A) Causes olefins to combine with each other (B) Causes olefins to combine with iso-paraffins (C) Converts iso-paraffin into olefin (D) Converts olefin into paraffin

Last Answer : (B) Causes olefins to combine with iso-paraffins

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Description : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Last Answer : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Description : Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Last Answer : (A) Reforming

For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Description : For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Last Answer : (C) Both (B) and (C)

Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Description : In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Last Answer : (B) Catalytic reforming

Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Higher vapour pressure of gasoline indicates(A) Low flash point(B) High breathing loss(C) Both (A) and (B)(D) Neither (A) nor (B

Description : Higher vapour pressure of gasoline indicates (A) Low flash point (B) High breathing loss (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (D) Neither (A) nor (B

In Hydrofining catalytic desulphurisation process for sweetening of petroleum products, use of hydrogen (A) Enhances the desulphurisation process (B) Minimises coke formation (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In Hydrofining catalytic desulphurisation process for sweetening of petroleum products, use of hydrogen (A) Enhances the desulphurisation process (B) Minimises coke formation (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) and (B)

Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) NH3 synthesis reaction

__________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : __________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Refractive index of a petrofuel which is the ratio of velocity of light in air to its velocity in the petrofuel gives an indication if its (A) Molecular weight (B) Aromatics content (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b’

Description : Refractive index of a petrofuel which is the ratio of velocity of light in air to its velocity in the petrofuel gives an indication if its (A) Molecular weight (B) Aromatics content (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b’

Last Answer : (C) Both ‘a’ & ‘b

Asphalts are(A) Low molecular weight & low boiling point compounds present in petroleum (B) Desirable in catalytic cracking feedstock, because they produce coke (C) Readily oxidisable and form carbonaceous sludge (D) All (A), (B) & (C)

Description : Asphalts are (A) Low molecular weight & low boiling point compounds present in petroleum (B) Desirable in catalytic cracking feedstock, because they produce coke (C) Readily oxidisable and form carbonaceous sludge (D) All (A), (B) & (C)

Last Answer : (C) Readily oxidisable and form carbonaceous sludge

Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

What single isomer would be found in greatest yield when isopropyl chloride undergoes a Friedel-Crafts alkylation with t-butylbenzene ?

Description : What single isomer would be found in greatest yield when isopropyl chloride undergoes a Friedel-Crafts alkylation with t-butylbenzene ?

Last Answer : What single isomer would be found in greatest yield when isopropyl chloride undergoes a Friedel-Crafts ... o-isopropyl-t-butylbenzene D. none of these

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

What is the difference between the market segments at the beginning of the round to the final round? a. They all drift at an average rate of .7; down and to the right. b. The fine cuts overlap in the beginning and in year 8; only the rough cuts overlap. c. The fine and rough cuts overlap in the beginning and by round 8 neither the fine nor rough cuts overlap. d. The traditional and low segment rough cuts overlap but all the remaining segments do not. e. The High, Traditional and Low segment rough cuts overlap but all the remaining segments do not.

Description : What is the difference between the market segments at the beginning of the round to the final round? a. They all drift at an average rate of .7; down and to the right. b. The fine cuts ... not. e. The High, Traditional and Low segment rough cuts overlap but all the remaining segments do not.

Last Answer : b. The fine cuts overlap in the beginning and in year 8; only the rough cuts overlap.

In McCabe-Thiele method, at infinite reflux ratio (A) The overhead product is minimum (B) Both the operating lines coincide with diagonal (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In McCabe-Thiele method, at infinite reflux ratio (A) The overhead product is minimum (B) Both the operating lines coincide with diagonal (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (A) The overhead product is minimum

A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Description : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give ... (S) is: A. B. C. D.

A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Description : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration ... respectively, are: A. B. C. D.

A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Description : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give an olefin (Q). Ozonolysis o

Last Answer : A carbonyl compound (P) which gives positive iodoform test, undergoes reaction with MeMgBr followed by dehydration to give ... (P) is: A. B. C. D.

2-Butyne undergoes catalytic hydrogenation in the presence of Lindlar's catalyst to give (a) 2-Butene (b) Butane (c) 1-Butene (d) 2-Methylpropene

Description : 2-Butyne undergoes catalytic hydrogenation in the presence of Lindlar's catalyst to give (a) 2-Butene (b) Butane (c) 1-Butene (d) 2-Methylpropene

Last Answer : 2-Butene

Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Description : Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Last Answer : (B) Presence of sulphur

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Plug

The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Perfectly mixed

Which of the following has highest boiling point and why?(L-II) (a) 2 methylpentane (b) 2,3 dimethyl butane (c) 2,2 dimythylbutane

Description : Which of the following has highest boiling point and why?(L-II) (a) 2 methylpentane (b) 2,3 dimethyl butane (c) 2,2 dimythylbutane

Last Answer : Ans. As the branching increases, surface area decreases. As a result, magnitude of Vander Waals forces of attraction decreases and hence the boiling point decreases. Thus, the overall order of decreasing boiling point is: 2 methylpentane (333k) > 2,3 dimethylbutane (331k) > 2,2 dimethylbutane(323k)

(a) What effect the branching of an alkane has on its melting point? (L-III) (b) Which of the following has highest boiling point?(L-III) (1) 2-methyl pentane. (2) 2, 3-diethyl butane. (3) 2, 2- dimethyl butane.

Description : (a) What effect the branching of an alkane has on its melting point? (L-III) (b) Which of the following has highest boiling point?(L-III) (1) 2-methyl pentane. (2) 2, 3-diethyl butane. (3) 2, 2- dimethyl butane.

Last Answer : Ans.(a) In general conception, as the branching increases packing of the molecules in the crystals becomes less close and have melting point decreases accordingly. (b) As the branching increases, ... attraction decreases and hence the boiling point decreases. So, 2-methyl pentane has highest B.pt.

Which of the following will have the highest boiling point? (a) Diethyl ether (b) n-Butane (c) Acetamide (d) n-Propylamine

Description : Which of the following will have the highest boiling point? (a) Diethyl ether (b) n-Butane (c) Acetamide (d) n-Propylamine

Last Answer : Acetamide

Which of the following would have the highest boiling point? (a) 1-Butano(b) Butane (c) 1-Butene (d) 1-Butynel

Description : Which of the following would have the highest boiling point? (a) 1-Butanol (b) Butane (c) 1-Butene (d) 1-Butyne

Last Answer : 1-Butanol

Which of the following alkanes will have the highest boiling point? (a) n-Octane (b) Isopentane (c) n-Butane (d) Neopentane

Description : Which of the following alkanes will have the highest boiling point? (a) n-Octane (b) Isopentane (c) n-Butane (d) Neopentane

Last Answer : n-Octane

How do the boiling points of butane, propane, and ethane compare? (a) the boiling point of ethane is greatestb) the boiling point of butane is greatest. (c) the boiling point of propane is greatest. (d) there is no relationship among these three alkanes and their boiling points.

Description : How do the boiling points of butane, propane, and ethane compare? (a) the boiling point of ethane is greatest. b) the boiling point of butane is greatest. (c) the boiling point of propane is greatest. (d) there is no relationship among these three alkanes and their boiling points

Last Answer : the boiling point of butane is greatest.

Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (B) Mean velocity

A decree becomes final (a) When no appeal has been preferred against the decree (b) When it conclusively determines the rights of the parties (c) Neither (a) nor (b) (d) Both (a) & (b)

Description :  A decree becomes final (a) When no appeal has been preferred against the decree (b) When it conclusively determines the rights of the parties (c) Neither (a) nor (b) (d) Both (a) & (b)

Last Answer : (d) Both (a) & (b)

Isozymes or iso enzymes are those enzyme which A- have same structural forms B- have different structural forms but identical catalytic properties C- catalyses oxidation reactionsD- none of these

Description : Isozymes or iso enzymes are those enzyme which A- have same structural forms B- have different structural forms but identical catalytic properties C- catalyses oxidation reactions D- none of these

Last Answer : have different structural forms but identical catalytic properties

Isozymes or iso enzymes are those enzyme which A- have same structural forms B- have different structural forms but identical catalytic properties C- catalyses oxidation reactions D- none of these

Description : Isozymes or iso enzymes are those enzyme which A- have same structural forms B- have different structural forms but identical catalytic properties C- catalyses oxidation reactions D- none of these

Last Answer : have different structural forms but identical catalytic properties

Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Description : Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Last Answer : (C) Aromatic

Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Description : Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Last Answer : (B) Paraffin

Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Description : Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Last Answer : (A) Propane & butane

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Flash point of an oil gives an idea of the (A) Nature of boiling point diagram of the system (B) Amount of low boiling fraction present (C) Explosion hazards (D) All (A), (B) and (C)

Description : Flash point of an oil gives an idea of the (A) Nature of boiling point diagram of the system (B) Amount of low boiling fraction present (C) Explosion hazards (D) All (A), (B) and (C)

Last Answer : (A) Nature of boiling point diagram of the system

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield?(A) Large reactor followed by smaller one(B) Smaller reactor followed by larger one(C) Either of the arrangement (A) or (B) will give the same yield(D) Data insufficient, can't be predicted

Description : A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield? (A) Large reactor followed by smaller one (B) Smaller reactor followed by larger one (C) Either of the arrangement (A) or (B) will give the same yield (D) Data insufficient, can't be predicted

Last Answer : (C) Either of the arrangement (A) or (B) will give the same yield

Among maximum shear stress theory and distortion energy theory, which gives the higher value shear yield strength? a) Maximum shear stress theory b) Distortion energy theory c) Both give equal values d) Vary from material to material

Description : Among maximum shear stress theory and distortion energy theory, which gives the higher value shear yield strength? a) Maximum shear stress theory b) Distortion energy theory c) Both give equal values d) Vary from material to material

Last Answer : b) Distortion energy theory