Heating of __________ to 120°C, produces plaster of paris.
(A) Blue vitriol
(B) Gypsum
(C) Calcium silicate
(D) Calcium sulphate

1 Answer

Answer :

(B) Gypsum

Related questions

Description : CaSO4 .½H2O is known as (A) Blue vitriol (B) Plaster of Paris (C) Gypsum (D) Zeolite

Last Answer : (B) Plaster of Paris

Description : On heating, Gypsum loses certain percentage of its water content and becomes (1) Chalk (2) Calcium sulphate (3) Plaster of Paris (4) a pearl

Last Answer : (3) Plaster of Paris Explanation: Plaster of paris, quick-setting gypsum plaster consisting of a fine white powder (calcium sulfate hemihydrate), which hardens when moistened and allowed to dry.

Description : 'Plaster of Paris' is made by partial dehydration of – (1) epsom salt (2) gypsum salt (3) blue vitriol (4) green vitriol

Last Answer : (2) gypsum salt Explanation: Plaster is a building material used for coating walls and ceilings. Plaster starts as a dry powder similar to mortar or cement and like those materials it is ... sandpaper. These characteristics make plaster suitable for a finishing, rather than a load-bearing material.

Description : ‘Plaster of Paris’ is made by partial dehydration of (1) epsom salt(2) gypsum salt (3) blue vitriol (4) green vitriol

Last Answer : gypsum salt

Description : At what temperature is gypsum heated to form Plaster of Paris?a) 90°C b) 100°C c) 110°C d) 120°C

Last Answer : b) 100°C

Description : How is Calcium Sulphate (Plaster of Paris), CaSO4·½ H2O (hemihydrate of calcium sulphate) prepared from gypsum? 

Last Answer : It is obtained when gypsum, CaSO4·2H2O, is heated to 393 K.   Above 393 K, no water of crystallisation is left and anhydrous calcium sulphate, CaSO4 is formed. This is known as dead burnt plaster'. ... quantity of water it forms a plastic mass that gets into a hard solid in 5 to 15 minutes.  

Description : Calcium sulphate is known as-----? A. Epsom salt B. Gypsum salt (Answer) C. Blue vitriol D. Potash alum

Last Answer : B. Gypsum salt (Answer)

Description : Calcination of gypsum produces (A) Plaster of Paris (B) Salt cake (C) Nitre cake (D) Lime

Last Answer : (A) Plaster of Paris

Description : The chemical name of "Plaster of Paris" commonly used for setting broken bones is – (1) Calcium nitrate (2) Calcium sulphate (3) Calcium carbonate (4) Calcium chloride

Last Answer : (2) Calcium sulphate Explanation: Plaster of Paris is the common name of Calcium Sulphate hemihydrate, with chemical formula: CaSO4.1/2H2O. Plaster of Paris is produced by heating gypsum to about 150°C.

Description : ‘Plaster of paris’ chemically known as (1) Sodium Aluminate (2) Calcium sulphate (3) Spdium bicarbonate (4) Sodium acetate

Last Answer : (2) Calcium sulphate Explanation: Calcium sulphate is a calcium salt that is used for a variety of purposes. It exists in various forms and states of hydration.

Description : The chemical name of “Plaster of Paris” commonly used for setting broken bones is (1) Calcium nitrate (2) Calcium sulphate (3) Calcium carbonate (4) Calcium chloride

Last Answer :  Calcium sulphate

Description : Plaster of Paris is (A) CaSO4 .½H2O (B) Used for setting of broken bones (C) Both (A) and (B) (D) Same as gypsum

Last Answer : (C) Both (A) and (B)

Description : Which of the following mineral is used in cement industry and plaster of paris? A. Marble B. China Clay C. Gypsum D. Fire Clay

Last Answer : ANSWER: C

Description : Which of the following mineral is used in cement industry and plaster of paris? A. Marble B. China Clay C. Gypsum D. Fire Clay

Last Answer : ANSWER: C

Description : Gypsum is heated at........temperature to form plaster of paris.(a) 110degree Celsius (b) 120degree Celsius (c) 100degree Celsius (d) 101degree Celsius

Last Answer : (c) 100degree Celsius

Description : Plaster of Paris is obtained by calcining (A) Bauxite (B) Gypsum (C) Lime stone (D) None of these

Last Answer : Answer: Option B

Description : __________ is the major constituent of the Portland cement. (A) Calcium carbonate (B) Calcium oxide (C) Tricalcium silicate (D) Calcium sulphate

Last Answer : (C) Tricalcium silicate

Description : Which one of the following salts does not contain water of crystallisation? (a) Blue vitriol (b) Baking soda (c) Washing soda (d) Gypsum

Last Answer : (b) Baking soda

Description : Which one of the following salts does not con-tain water of crystallisation? a) Blue vitriol b) Baking soda c) Washing soda d) Gypsum

Last Answer : b) Baking soda

Description : Which one of the following salts does not contain water of crystallisation? a) Soda Blue vitriol b) Baking soda c) Washing d) Gypsum

Last Answer : b) Baking soda

Description : Blue vitriol is chemically (A) Copper sulphate (B) Ferrous sulphate (C) Copper nitrate (D) Aluminium sulphate

Last Answer : (A) Copper sulphate

Description : Main constituents of Portland cement are calcium aluminate and (A) Gypsum (B) Silicates (C) Sodium silicate (D) Carbonates

Last Answer : (B) Silicates

Description : The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Last Answer : (A) Gypsum

Description : To retard the initial setting time of cement, the compound responsible, is (A) Tri-calcium silicate (B) Gypsum (C) Di-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

Description : Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

Description : What is the name and chemical formula of the main product formed by heating baking soda. (a) sodium carbonate,Na 2 CO 3 (b) Bleaching powder ,CaOCl 2 (c) sodium chloride,Na Cl (d)Plaster of paris ,CaSO 4 .I/2H 2 O

Last Answer : (a) sodium carbonate,Na 2 CO 3

Description : Gypsum is chemically (A) Calcium chloride (B) Potassium sulphate (C) Sodium sulphate (D) Calcium sulphate

Last Answer : (D) Calcium sulphate

Description : Quartz is made of – (1) Calcium Sulphate (2) Calcium Silicate (3) Sodium Sulphate (4) Sodium Silicate

Last Answer : (4) Sodium Silicate Explanation: Quartz is an abundant mineral in the Earth's continental crust. It is made tip of a continuous framework of SiO4 silicon-oxygen tetrahedra, wit Ii each oxygen being shared between two tetrahedra, giving an overall formula SiO2.

Description : Quartz is made of (1) Calcium Sulphate (2) Calcium Silicate (3) Sodium Sulphate (4) Sodium Silicate

Last Answer :  Sodium Silicate

Description : Pick up the correct statement from the following: (A) Calcium chloride acts as a retarder (B) Calcium chloride acts as an accelerator (C) Gypsum (calcium sulphate) acts as a retarder (D) Both (b) and (c)

Last Answer : (D) Both (b) and (c)

Description : Fusion point of coal ash increases with increase in its __________ content. (A) Iron sulphate (B) Iron silicate (C) Lime and magnesia (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Sand and __________ is fused at 1300°C, to produce sodium silicate. (A) Limestone (B) Soda ash (C) Coke (D) Sodium sulphate

Last Answer : (B) Soda ash

Description : Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial ... cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Last Answer : (A) High early strength cement are made from materials having high silica to lime ratio

Description : Melamine formaldehyde resin which has a very high anti tacking properties, is not used for the (A) Electrical insulation purpose (B) Tanning of leather (C) Strengthening of plaster of Paris (D) Decorative laminates

Last Answer : (C) Strengthening of plaster of Paris

Description : Setting of plaster of Paris is accompanied with (A) Hydration (B) Dehydration (C) Hydrolysis (D) Loss of CO2

Last Answer : (A) Hydration

Description : CaCl(OCl) is the chemical formula of (A) Hypo (B) Bleaching powder (C) Plaster of Paris (D) Aqua regia

Last Answer : (B) Bleaching powder

Description : Pick out the wrong statement. (A) Conversion of SO2 to SO3 in Monsanto-4 pass converter is about 98% (B) The chemical formula of oleum is H2S2O7 , which is formed by saturating ... but technical sulphuric acid (D) Decomposition of sulphuric acid on heating does not start before its boiling

Last Answer : (D) Decomposition of sulphuric acid on heating does not start before its boiling

Description : A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Last Answer : C2s

Description : Write an equation to show the reaction between Plaster of Paris and water -SST 10th

Last Answer : ' solutions : -

Description : Why is plaster of paris stored in a moisture proof container? -Chemistry-10

Last Answer : Plaster of Paris in contact with moisture (water) changes to solid hard mass, gypsum. Therefore, it gets wasted. Hence it should be stored in moisture proof containers.

Description : Who makes plaster of Paris? -General Knowledge

Last Answer : answer:

Description : Is Plaster of Paris organic or in organic?

Last Answer : Surely Inorganic ✌️

Description : What is Plaster of Paris ?

Last Answer : : Calcium carbonate composed of two atoms of water is called plaster of Paris.

Description : Which of the following is used for wrapping of fractured bones? (1) White cement (2) White lead (3) Zinc oxide (4) Plaster of Paris

Last Answer : (4) Plaster of Paris Explanation: Plaster of Paris is a plaster made by calcining gypsum. It can be used to impregnate gauze bandages to make a sculpting material called modroc. It is used ... (and sometimes still is) used to make classic plaster orthopedic casts to protect limbs with broken bones.

Description : Setting of plaster of paris involves – (1) dehydration process (2) hydration to form other hydrates (3) oxidation process (4) reduction process

Last Answer : (2) hydration to form other hydrates Explanation: The setting of plaster of Paris takes place by hydration due to the formation of a solid crystalline hydrate and hardening of Plaster of Paris is ... . A slight expansion takes place in the process and heat is evolved. This process is exothermic.

Description : What is formula of plaster of paris?

Last Answer : 2CaSO4.H2O

Description : Which metal is found in ‘plaster of paris’?

Last Answer : Calcium

Description : Plaster of Paris:

Last Answer : Compound of Calcium. When hydrated, the form is rigid. Blessing for broken bones. Also used for architecture designing(Model designing), Sculpures and for filling purposes in different areas.

Description : Explain the following: (i) Blood group (ii) Short circuit (iii) Short sight (iv) International date line (v) Plaster of Paris

Last Answer : Answers: (i) Blood group A blood type (also called a blood group) is a classification of blood based on the presence or absence of inherited antigenic substances on the surface of red blood ... calcium sulfate hemihydrate, nominally CaSO4 0.5H2O. It is created by heating gypsum to about 150 °C.

Description : Which of the following salts do not have the water of crystalisation? (i) Bleaching Powder (ii) Plaster of Paris (iii) washing soda (iv) Baking soda (a) (ii) and (iv) (b) (i) and (iii) (c) (ii) and (iii) (d) (i) and (iv)

Last Answer : (d) (i) and (iv)