Sand and __________ is fused at 1300°C, to produce sodium silicate.
(A) Limestone
(B) Soda ash
(C) Coke
(D) Sodium sulphate

1 Answer

Answer :

(B) Soda ash

Related questions

Description : Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Last Answer : (B) Sand

Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Last Answer : (B) Brine and coal

Description : Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas (B) Ammonia, salt and limestone (C) Ammonia limestone and coke (D) None of these

Last Answer : (A) Salt, limestone and coke or gas

Description : Fusion point of coal ash increases with increase in its __________ content. (A) Iron sulphate (B) Iron silicate (C) Lime and magnesia (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Which of the following is not required in the manufacture of soda ash by Solvay process? (A) Ammonia (B) Limestone (C) Nitric acid (D) None of these

Last Answer : (C) Nitric acid

Description : Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Last Answer : (A) Iron oxide

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

Description : The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore

Last Answer : Limestone, coke & iron ore

Description : Fertiliser produced during soda ash manufacture by dual process is ammonium (A) Chloride (B) Sulphate (C) Nitrate (D) None of these

Last Answer : (A) Chloride

Description : Sodium bicarbonate is produced during soda ash manufacture using a __________ tower. (A) Plate (B) Baffle (C) Packed (D) None of these

Last Answer : (B) Baffle

Description : Which of the following is a bleaching agent added in the detergents to facilitate removal of stains caused due to blood, tea etc? (A) Sodium silicate (B) Sodium borate (C) Sodium tripolyphosphate (STPP) (D) Caustic soda

Last Answer : (B) Sodium borate

Description : The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Last Answer : (B) Sand, lime and soda ash

Description : Raw materials used for the manufacture of glass are – (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Last Answer : (1) sand, soda, limestone Explanation: Quartz sand (silica) is the main raw material in commercial glass production. While fused quartz (primarily composed of SiO2) is used for some special ... over 1200 degree C (2192 degree F). Normally, other substances are added to simplify processing.

Description : Raw materials used for the manufacture of glass are (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda 

Last Answer : sand, soda, limestone

Description : Quartz is made of – (1) Calcium Sulphate (2) Calcium Silicate (3) Sodium Sulphate (4) Sodium Silicate

Last Answer : (4) Sodium Silicate Explanation: Quartz is an abundant mineral in the Earth's continental crust. It is made tip of a continuous framework of SiO4 silicon-oxygen tetrahedra, wit Ii each oxygen being shared between two tetrahedra, giving an overall formula SiO2.

Description : Quartz is made of (1) Calcium Sulphate (2) Calcium Silicate (3) Sodium Sulphate (4) Sodium Silicate

Last Answer :  Sodium Silicate

Description : A mixture of phosphate rock __________ is heated in an electric furnace to produce phosphorous. (A) Salt & coke (B) Sand & coke (C) And coke (D) And sand

Last Answer : (B) Sand & coke

Description : Main component of bone ash is (A) Calcium sulphate (B) Calcium phosphate (C) Calcium carbonate (D) Sodium phosphate

Last Answer : what is the answer ?

Description : Heating of __________ to 120°C, produces plaster of paris. (A) Blue vitriol (B) Gypsum (C) Calcium silicate (D) Calcium sulphate

Last Answer : (B) Gypsum

Description : __________ is the major constituent of the Portland cement. (A) Calcium carbonate (B) Calcium oxide (C) Tricalcium silicate (D) Calcium sulphate

Last Answer : (C) Tricalcium silicate

Description : High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Last Answer : (A) Are soft & friable (poor strength and size stability)

Description : The doctor's solution comprises of sodium plumbite in (A) Alcohol (B) Water (C) Aqueous caustic soda (D) Soda ash

Last Answer : (C) Aqueous caustic soda

Description : Reaction of ortho-phosphoric acid with soda ash produces (A) Sodium Tributyl phosphate (STPP) (B) Tricresyl phosphate (C) Tributyl phosphate (D) Nitrophosphate

Last Answer : (A) Sodium Tributyl phosphate (STPP)

Description : Sodium carbonate (soda ash) is not used in the manufacture of (A) Fire extinguishers (B) Sugar (C) Baking powder (D) Detergents

Last Answer : (D) Detergents

Description : . Chemical name of soda ash is (A) Sodium bicarbonate (B) Sodium thiosulphate (C) Potassium carbonate (D) None of these

Last Answer : (D) None of these

Description : Permanent hardness of water can be removed by (A) Addition of soda ash to it (B) Treating it with zeolites (C) Passing it through sodium hexametaphosphate (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

Description : In the Solvay process, the product from the calciner is (A) Light soda ash (B) Dense soda ash (C) Sodium bicarbonate (D) Dehydrated soda ash

Last Answer : (A) Light soda ash

Description : Laboratory glass wares which reacts with hydrofluoric acid, are made of the __________ glass. (A) Lead (B) Borosilicate (C) Soda lime (D) Alkali silicate

Last Answer : (B) Borosilicate

Description : Which of the following materials is used along with iron ore and limestone to produce iron in a modern blast furnace? w) coke x) cementite y) coal z) bauxite

Last Answer : ANSWER: W -- COKE

Description : Exothermic neutralisation reaction between caustic soda and dodecylbenzene sulfonic acid produces sodium dodecylbenzene sulphate, which is a/an (A) Explosive (B) Soap (C) Detergent (D) Analgesic drug

Last Answer : (C) Detergent

Description : Fusion of bauxite and __________ produces high alumina cement. (A) Alum (B) Limestone (C) Coke (D) Quartz

Last Answer : (B) Limestone

Description : The common name of sodium bicarbonate is - (1) Soda ash (2) Baking soda (3) Soda lime (4) Baking powder

Last Answer : (2) Baking soda Explanation: Sodium bicarbonate (NaHCO3) is also known as baking soda, bread soda, cooking soda, and bicarbonate of soda. It is primarily used in cooking (baking), as a leavening ... of the batter and forms the characteristic texture and grain in pancakes, cakes, quick breads, etc.

Description : Commercially, sodium bicarbonate is known as – (1) Washing soda (2) Baking soda (3) Bleaching powder (4) Soda ash

Last Answer : (2) Baking soda Explanation: Sodium bicarbonate or sodium hydrogen carbonate is the chemical compound with the formula NaHCO3. Sodium bicarbonate is a white solid that is crystalline but often appears as a ... . It is a component of the mineral patron and is found dissolved in many mineral springs.

Description : The common name for the com-pound having formal NaOH is – (1) Caustic soda (2) Caustic potash (3) Soda ash (4) Sodium hydroxide

Last Answer : (1) Caustic soda Explanation: Sodium hydroxide, also known as lye or caustic soda, has the molecular formula NaOH and is a highly caustic metallic base. It is a white solid available in pellets ... manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner.

Description : The common name of sodium bicarbonate is (1) Soda ash (2) Baking soda (3) Soda lime (4) Baking powder

Last Answer : Baking soda

Description : The common name for the compound having formal NaOH is (1) Caustic soda (2) Caustic potash (3) Soda ash (4) Sodium hydroxide

Last Answer : Caustic soda

Description : Commercially, sodium bicarbonate is known as (1) Washing soda (2) Baking soda (3) Bleaching powder (4) Soda ash 

Last Answer : Baking soda

Description : Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Last Answer : (D) Volatile matter

Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (D) 24

Description : Fusion of limestone and __________ produces high alumina cement. (A) Sand (B) Bauxite (C) Quicklime (D) Calcite

Last Answer : (B) Bauxite

Description : Another name for baking soda is : (1) Sodium bicarbonate (2) Sodium carbonate (3) Sodium sulphate (4) Sodium hydroxide

Last Answer : (1) Sodium bicarbonate Explanation: Sodium bicarbonate (NaHCO2)is known as baking soda.

Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Description : In primitive days, __________ was being manufactured by Leblanc Process. (A) Alum (B) Washing soda (C) Soda ash (D) Calcium carbide

Last Answer : (C) Soda ash

Description : Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Last Answer : (D) Screw

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Description : furnace slag is mainly molten (A) Sand (B) Magnesium silicate (C) Calcium silicate (D) Iron pyrite

Last Answer : Option C

Description : Pick up the incorrect statement from the following: (A) Tricalcium silicate (C3S) hydrates rapidly (B) Tricalcium silicate (C3S) generates more heat of hydration (C) Tricalcium silicate (C3S) develops early strength (D) Tricalcium silicate (C3S) has more resistance to sulphate attack

Last Answer : Answer: Option D

Description : Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Last Answer : Answer: Option B

Description : The presence of dicalcium silicate in cement. (a) Hydrates the cement slowly. (b) Generates less heat of hydration. (c) Has more resistance to sulphate attack. (d) All of these

Last Answer : (d) All of these

Description : The presence of tricalcium silicate in cement (a) Hydrates the cement rapidly (b) Generates less heat of hydration. (c) Offer high resistance to sulphate attack (d) All of these

Last Answer : (a) Hydrates the cement rapidly