Pick out the wrong statement.
(A) Conversion of SO2
to SO3
in Monsanto-4 pass converter is about 98%
(B) The chemical formula of oleum is H2S2O7
, which is formed by saturating
sulphuric acid with sulphur trioxide
(C) Vitriol oil is nothing but technical sulphuric acid
(D) Decomposition of sulphuric acid on heating does not start before its
boiling

1 Answer

Answer :

(D) Decomposition of sulphuric acid on heating does not start before its
boiling

Related questions

Description : Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100

Last Answer : (C) 98

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Sulphuric acid completely saturated with sulphur trioxide is called (A) Concentrated sulphuric acid (B) Oleum (C) Sulphurous acid (D) Dilute sulphuric acid

Last Answer : (A) Concentrated sulphuric acid

Description : Chemical formula of oleum is (A) H2SO3 (B) H2SO4 (C) H2S2O7 (D) H2SO7

Last Answer : (C) H2S2O7

Description : Which is the most efficient absorbent for SO3 out of the following? (A) 20% oleum (B) 65% oleum (C) 78% H2SO4 (D) 98% H2SO4

Last Answer : (D) 98% H2SO4

Description : Sulphuric acid saturated with SO3 is called (A) Concentrated H2SO4 (B) Sulphurous acid (C) Oleum (D) None of these

Last Answer : (C) Oleum

Description : The catalytic converter for conversion of SO2 to SO3 by contact process should have a feed with SO2 content between (A) 2-5 % (B) 7-10 % (C) 12-15 % (D) 20-25 %

Last Answer : (B) 7-10 %

Description : In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to ... some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Last Answer : (C) Removing some quantity of SO3 during intermediate stage

Description : Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) NH3 synthesis reaction

Description : 10% oleum comprises of 10% free (A) SO2 (B) H2SO3 (C) SO3 (D) H2SO4

Last Answer : (C) SO3

Description : More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Last Answer : (B) H2SO4

Description : Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4

Last Answer : (C) SO3

Description : Pick out the wrong statement. (A) Catalytic converter is fitted in automobiles to reduce carbon monoxide concentration in exhaust emissions (B) Inhalation of pollutant carbon monoxide results ... D) Decomposition of plants containing chlorophyll is a natural source of carbon monoxide in atmosphere

Last Answer : (C) Sulphur dioxide is the main pollutant emitted from the exhaust of petrol driven automobiles

Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Last Answer : (C) Catalytic homogenous

Description : Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Last Answer : (A) Sulphuric acid (10%) at room temperature

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Description : Pick out the correct statement. (A) Chemical oxygen demand (COD) is a measure of chemically oxidisable organic matter present in water (B) COD is determined by oxidising the organic matter present in water with potassium dichromate ... of potable water may be 1-2 mg/litre (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Pick out the wrong statement. (A) In case of heat transfer by purely forced convection, GR /Re 2 ≤ 1 (B) The equivalent diameter of heat transfer for a duct of ... nucleate boiling depends basically on the ease with which the bubbles are formed and detached from the heating surface

Last Answer : (B) The equivalent diameter of heat transfer for a duct of square cross￾section (having each side as 'x') is equal to 4x

Description : Pick out the wrong statement. (A) Benzopyrene which causes cancer is present in traces in tobacco, charcoal & petrol driven automobile exhaust (B) NO2 is capable of penetrating the troposphere and ... at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Last Answer : (D) H2S is not at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Description : In the manufacture of sulphuric acid from elemental sulphur, the following sequence of major operations is followed: (A) Furnace → converter → absorber (B) Furnace → evaporator → absorber (C) Furnace → converter → evaporator (D) Converter → furnace → absorber

Last Answer : (A) Furnace → converter → absorber

Description : 20% oleum means that in 100 kg oleum, there are 20 kg of (A) SO3 and 80kg of H2SO4 (B) H2SO4 and 80kg of SO3 (C) SO3 for each 100 kg of H2SO4 (D) None of these

Last Answer : (A) SO3 and 80kg of H2SO4

Description : Which of the following is an endothermic reaction? (A) Absorption of SO3 in 98% H2SO4 (B) C + H2O = CO + H2 (C) Thermal dissociation of iron pyrites (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Description : Sulphuric acid solution having a specific gravity of 1.20 at room temperature is used mainly for the (A) Fertiliser manufacture (B) Car battery solution (C) Synthesis of oleum (D) Water treatment

Last Answer : (B) Car battery solution

Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Last Answer : (B) Lead

Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Last Answer : (B) Cast iron

Description : Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral ... through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Last Answer : (D) Benzene hexachloride is not a contact insecticide

Description : In the converter of the contact process for the manufacture of H2SO4 the equilibrium conversion of SO2__________ (i) __________ with increase in temperature and __________ (ii) __________ with increase in the mole ratio ... increases (C) (i) increases (ii) increases (D) (i) decreases (ii) decreases

Last Answer : (B) (i) decreases (ii) increases

Description : During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on ... be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Last Answer : (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced)

Description : Consider the following changes: 1. Curdling of milk 2. Sublimation of camphor 3. Drying of paint 4. Oxidation of SO2 to SO3 The chemical changes are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

Description : What happens, when SO2is passed through a solution of H2S in water? (A) Precipitation of sulphur takes place (B) H2SO3is formed (C) Oleum is formed (D) None of these

Last Answer : (A) Precipitation of sulphur takes place

Description : When a lead storage battery is discharged - (1) SO2 is evolved (2) Lead sulphate is consumed (3) Lead is formed (4) Sulphuric acid is consumed

Last Answer : (4) Sulphuric acid is consumed Explanation: Lead storage battery was invented by French physicist Gaston Plante in 1859. In the discharged state both the positive and negative plates become lead sulphate and the electrolyte loses much of its dissolved sulphuric acid and becomes primarily water.

Description : When a lead storage battery is discharged, (1) SO2 is evolved (2) Lead sulphate is consumed (3) Lead is formed (4) Sulphuric acid is consumed 

Last Answer : Sulphuric acid is consumed

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

Description : Acid rain is due to increase in atmospheric  concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2

Last Answer : (d) SO2 and NO2.

Description : Acid rain is due to increase in atmospheric concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2.

Last Answer : (d) SO2 and NO2.

Description : Acid rain is caused by increase in the atmospheric concentration of (a) CO2 and CO (b) O3 and dust (c) SO2 and NO2 (d) SO3 and CO.

Last Answer : (c) SO2 and NO2

Description : Which of the following reagents will react with furan to form 2-furansulfonic acid? (a) SO3 in pyridine at 100°C (b) Dilute H2SO4 at 200°C (c) SO2 at 100°C (d) Dilute H2SO4 at 100°C

Last Answer : SO3 in pyridine at 100°C

Description : Pick out the correct statement. (A) Deforestation helps in controlling the green house effect (B) Global warming is detrimental for increase in food productivity and may cause flood and cyclone ( ... natural source of production of SO2 & H2S pollutant (D) Sulphur dioxide causes death by asphyxiation

Last Answer : (B) Global warming is detrimental for increase in food productivity and may cause flood and cyclone

Description : Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of ... in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Last Answer : (C) Red phosphorous is the most reactive allotropic form of phosphorous

Description : The characteristic feature of phenytoin pharmacokinetics is: A. High first pass metabolism B. Nonsaturation kinetics of metabolism C. Capacity limited metabolism saturating at higher therapeutic concentration range D. Extrahepatic metabolism

Last Answer : C. Capacity limited metabolism saturating at higher therapeutic concentration range

Description : Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Last Answer : (A) Reduce SO2 content in

Description : Main pollutants released from iron & steel industry is (A) CO, CO2 & SO2 (B) H2S, NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Last Answer : (A) CO, CO2 & SO2

Description : Main pollutants released from petroleum refineries is (A) CO, SO2 & H2S (B) CO2 , NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Last Answer : (A) CO, SO2 & H2S

Description : Which of the following pollutants is absent in the emissions from a fertiliser plant? (A) SO2 & SO3 (B) NO2 (C) NH3 (D) CO

Last Answer : (D) CO

Description : During manufacture of H2SO4 , the oxidation of SO2 to SO3 by oxygen is an endothermic reaction. The yield of SO3 will be maximised, if the (A) Temperature is increased (B) Pressure is reduced (C) Temperature is increased and pressure is reduced (D) Temperature is reduced and pressure is increased

Last Answer : (D) Temperature is reduced and pressure is increased

Description : If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 ( ... 's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Last Answer : (A) Decreases

Description : . Bromides contained in hot mother liquor is treated with __________ during manufacture of bromine from sea water. (A) SO3 (B) Cl2 (C) NH3 (D) SO2

Last Answer : (B) Cl2

Description : At a given temperature, the equilibrium yield of SO3 obtained from the oxidation of SO2 is proportional to (where, P = pressure of the system). (A) P (B) √P (C) P (D) 1/P

Last Answer : (B) √P

Description : Which of the following plants does not emit appreciable amount of SO2 in atmosphere? (A) Thermal power plant (B) Petroleum refinery (C) Nitric acid plant (D) Sulphuric acid plant

Last Answer : (C) Nitric acid plant

Description : __________ plant emits large amount of SO2 as an air pollutant. (A) Nitric acid (B) Sulphuric acid (C) Chlor alkali (D) Iron & steel

Last Answer : (B) Sulphuric acid