Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Which among the following represents the
objectives/requirements of Data Link Layer?
a. Frame Synchronization
b. Error & Flow Control
c. Both a & b
d. None of the above
by

1 Answer

Answer :

c. Both a & b
by

Related questions

At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (bD)neither (a) nor (b)

Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)

Last Answer : neither (a) nor (b)

The layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Description : The layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Last Answer : A) Physical

Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layerc. Transport layer d. Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layer c. Transport layer d. Link layer

Last Answer : b. Session layer

Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layerc. Transport layer d. Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layer c. Transport layer d. Link layer

Last Answer : b. Session layer

Delimiting and synchronization of data exchange is provided by __________ a) Application layer b) Session layer c) Transport layer d) Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a) Application layer b) Session layer c) Transport layer d) Link layer

Last Answer : b) Session layer

Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Description : Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Last Answer : D. all of the mentioned

The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Description : The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Last Answer : d. All the above

The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Description : The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Last Answer : D. All the above

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Description : An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Last Answer : Frame check sequence

Which sublayer of the data link layer performs data link functions that depend upon the type of medium? a. logical link control sublayer b. media access control sublayer c. network interface control sublayer d. error control sublayer

Description : Which sublayer of the data link layer performs data link functions that depend upon the type of medium? a. logical link control sublayer b. media access control sublayer c. network interface control sublayer d. error control sublayer

Last Answer : b. media access control sublayer

Which sublayer of the data link layer performs data link functions that depend upon the type of medium? A. logical link control sublayer B. media access control sublayer C. network interface control sublayer D. error control sublayer

Description : Which sublayer of the data link layer performs data link functions that depend upon the type of medium? A. logical link control sublayer B. media access control sublayer C. network interface control sublayer D. error control sublayer

Last Answer : B. media access control sublayer

Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Description : Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Last Answer : the physical and data link layers

Header of a frame generally contains a. synchronization bytes b. addresses c. frame identifier d. all of the mentioned

Description : Header of a frame generally contains a. synchronization bytes b. addresses c. frame identifier d. all of the mentioned

Last Answer : d. all of the mentioned

The ............layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Description : The ............layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Last Answer : A) Physical

The............ layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Description : The............ layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Last Answer : A) Physical

Block coding can help in _______at the receiver. A) Synchronization B) Error detection C) Attenuation D) (a) and (b)

Description : Block coding can help in _______at the receiver. A) Synchronization B) Error detection C) Attenuation D) (a) and (b)

Last Answer : (a) and (b)

The purpose of the _______is to provide flow and error control for the upper-layer protocols that actually demand theseservices A) MAC B) LLC C) LLU D) none of the above

Description : The purpose of the _______is to provide flow and error control for the upper-layer protocols that actually demand theseservices A) MAC B) LLC C) LLU D) none of the above

Last Answer : LLC

The types of data services offered by an LLC (Logical Link Control) layer are a. Connectionless which is fast and unreliable b. Connection Oriented which is slow and reliable c. Both A and B d. None

Description : The types of data services offered by an LLC (Logical Link Control) layer are a. Connectionless which is fast and unreliable b. Connection Oriented which is slow and reliable c. Both A and B d. None

Last Answer : c. Both A and B

The two sublayers of a Data Link layer are a. LLC Logical Link Control Layer b. MAC Medium Access Control Layer c. Both A and B d. Data Layer

Description : The two sublayers of a Data Link layer are a. LLC Logical Link Control Layer b. MAC Medium Access Control Layer c. Both A and B d. Data Layer

Last Answer : c. Both A and B

Which is the main function of transport layer? A) Node to node delivery B) End to end delivery C) Synchronization d) Updating and maintaining routing tables

Description : Which is the main function of transport layer? A) Node to node delivery B) End to end delivery C) Synchronization d) Updating and maintaining routing tables

Last Answer : B) End to end delivery

_________control inthe datalink layer is based on automatic repeat request, which is the retransmission of data. A) Flow B) Error C) Transmission D) none of the above

Description : _________control inthe datalink layer is based on automatic repeat request, which is the retransmission of data. A) Flow B) Error C) Transmission D) none of the above

Last Answer : Transmission

In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer e. none of above

Description : In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer e. none of above

Last Answer : session layer

In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer

Description : In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer

Last Answer : a. session layer

Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Description : Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Last Answer : A. receive sliding window.

Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for Modems) b. Frame Relay protocol as LAPF (Link Access Procedure for Frame Relay) c. ISDN (Integrated Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Last Answer : d. All the above

In asynchronous serial communication the physical layer provides ___________ a. start and stop signalling b. flow control c. both start & stop signalling and flow control d. only start signalling

Description : In asynchronous serial communication the physical layer provides ___________ a. start and stop signalling b. flow control c. both start & stop signalling and flow control d. only start signalling

Last Answer : c. both start & stop signalling and flow control

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Description : A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Last Answer : bridge

In IPv6,options are inserted between the _________and the ___________ data. A) baseheader;extensionheader B) baseheader;upper-layer data C) base header; frame header D) noneof the abov

Description : In IPv6,options are inserted between the _________and the ___________ data. A) baseheader;extensionheader B) baseheader;upper-layer data C) base header; frame header D) noneof the abov

Last Answer : baseheader;upper-layer data

The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

Which of the following term describes PDU encapsulated at Transport Layer? a. Frame b. Packet c. Data d. Segment

Description : Which of the following term describes PDU encapsulated at Transport Layer? a. Frame b. Packet c. Data d. Segment

Last Answer : d. Segment

The protocol data unit (PDU) for the application layer in the Internet stack is?a. Datagram b. Frame c. Message d. Segment

Description : The protocol data unit (PDU) for the application layer in the Internet stack is? a. Datagram b. Frame c. Message d. Segment

Last Answer : c. Message

The protocol data unit PDU for the Transport layer in the Internet stack is A. Segment B. Datagram C. Message/Data D. Frame

Description : The protocol data unit PDU for the Transport layer in the Internet stack is A. Segment B. Datagram C. Message/Data D. Frame

Last Answer : A. Segment

In IPv6, options are inserted between the _________ and the ___________ data A. base header; extension header B. base header; upper-layer data C. base header; frame header D. none of the above

Description : In IPv6, options are inserted between the _________ and the ___________ data A. base header; extension header B. base header; upper-layer data C. base header; frame header D. none of the above

Last Answer : B. base header; upper-layer data

The protocol data unit(PDU) for the application layer in the Internet stack is (A) Segment (B) Datagram (C) Message/Data (D) Frame

Description : The protocol data unit(PDU) for the application layer in the Internet stack is (A) Segment (B) Datagram (C) Message/Data (D) Frame

Last Answer : (C) Message/Data

Automatic repeat request error management mechanism is provided by ________ a. logical link control sublayer b. media access control sublayerc. network interface control sublayer d. application access control sublayer

Description : Automatic repeat request error management mechanism is provided by ________ a. logical link control sublayer b. media access control sublayer c. network interface control sublayer d. application access control sublayer

Last Answer : a. logical link control sublayer

Automatic repeat request error management mechanism is provided by ________ A. logical link control sublayer B. media access control sublayer C. network interface control sublayer D. application access control sublayer

Description : Automatic repeat request error management mechanism is provided by ________ A. logical link control sublayer B. media access control sublayer C. network interface control sublayer D. application access control sublayer

Last Answer : A. logical link control sublayer

Transport layer can identify the symptoms of overload nodes using _________ a. Flow control b. Traffic control c. Byte orientation d. Data integrity

Description : Transport layer can identify the symptoms of overload nodes using _________ a. Flow control b. Traffic control c. Byte orientation d. Data integrity

Last Answer : b. Traffic control

In Bluetooth, the_____ link is used when avoiding latency (delay in data delivery) is more important than integrity (error-free delivery). A) SCO B) ACL C) ACO D) SCL

Description : In Bluetooth, the_____ link is used when avoiding latency (delay in data delivery) is more important than integrity (error-free delivery). A) SCO B) ACL C) ACO D) SCL

Last Answer : SCO

Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Description : Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Last Answer : cyclic redundancy codes

The Philippine Framework for Assurance Engagements a. Provides a frame of reference for CPAs in public practice when performing audits, reviews, and compilations of historical financial information. b. Contains basic principles, essential procedures, and related guidance for the performance of assurance engagements. c. Establishes standards and provides procedural requirements for the performance of assurance engagements. d. Defines and describes the elements and objectives of an assurance engagement, and identifies engagements to which PSAs, PSREs, and PSAEs apply

Description : The Philippine Framework for Assurance Engagements a. Provides a frame of reference for CPAs in public practice when performing audits, reviews, and compilations of historical financial information. b. ... of an assurance engagement, and identifies engagements to which PSAs, PSREs, and PSAEs apply

Last Answer : Defines and describes the elements and objectives of an assurance engagement, and identifies engagements to which PSAs, PSREs, and PSAEs apply

Which services are provided by transport layer? a. Error control b. Connection service c. Connection less service d. Congestion control

Description : Which services are provided by transport layer? a. Error control b. Connection service c. Connection less service d. Congestion control

Last Answer : a. Error control

Which one of the following is not a function of network layer? a. routing b. inter-networking c. congestion control d. error contro

Description : Which one of the following is not a function of network layer? a. routing b. inter-networking c. congestion control d. error contro

Last Answer : d. error control

Which one of the following is not a function of network layer? a) routing b) inter-networkingc) congestion control d) error control

Description : Which one of the following is not a function of network layer? a) routing b) inter-networking c) congestion control d) error control

Last Answer : d) error control

Error Control is an application layer service? True False

Description : Error Control is an application layer service? True False

Last Answer : False

In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit provides synchronization. A) Manchester B) differential ManchesteC) both (a) and (b) D) neither (a) nor (b)r

Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

Using which method in transport layer data integrity can be ensured? a. Checksum b. Repetition codes c. Cyclic redundancy checks d. Error correcting codes

Description : Using which method in transport layer data integrity can be ensured? a. Checksum b. Repetition codes c. Cyclic redundancy checks d. Error correcting codes

Last Answer : a. Checksum

What is the minimum number of wires needed to send data over a serial communication link layer? a. 1 b. 2 c. 4 d. 6 e. none of above

Description : What is the minimum number of wires needed to send data over a serial communication link layer? a. 1 b. 2 c. 4 d. 6 e. none of above

Last Answer : 2

In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Description : In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Last Answer : network layer