Which of the following term describes PDU encapsulated at Transport Layer? a. Frame b. Packet c. Data d. Segment

Which of the following term describes
PDU encapsulated at Transport Layer?
a. Frame
b. Packet
c. Data
d. Segment
by

1 Answer

Answer :

d. Segment
by

Related questions

The protocol data unit PDU for the Transport layer in the Internet stack is A. Segment B. Datagram C. Message/Data D. Frame

Description : The protocol data unit PDU for the Transport layer in the Internet stack is A. Segment B. Datagram C. Message/Data D. Frame

Last Answer : A. Segment

The protocol data unit (PDU) for the application layer in the Internet stack is?a. Datagram b. Frame c. Message d. Segment

Description : The protocol data unit (PDU) for the application layer in the Internet stack is? a. Datagram b. Frame c. Message d. Segment

Last Answer : c. Message

The protocol data unit(PDU) for the application layer in the Internet stack is (A) Segment (B) Datagram (C) Message/Data (D) Frame

Description : The protocol data unit(PDU) for the application layer in the Internet stack is (A) Segment (B) Datagram (C) Message/Data (D) Frame

Last Answer : (C) Message/Data

In IPv4, when a datagram is encapsulated in a frame, the total sizeof the datagram must beless thanthe _______. A) MUT B) MAT C) MTU D) noneof the above

Description : In IPv4, when a datagram is encapsulated in a frame, the total sizeof the datagram must beless thanthe _______. A) MUT B) MAT C) MTU D) noneof the above

Last Answer : MTU

The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

The layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Description : The layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Last Answer : A) Physical

Application layer is implemented in _______ a. End system b. NIC c. Ethernet d. Packet transport

Description : Application layer is implemented in _______ a. End system b. NIC c. Ethernet d. Packet transport

Last Answer : a. End system

Application layer is implemented in ____________ a) End system b) NIC c) Ethernet d) Packet transport

Description : Application layer is implemented in ____________ a) End system b) NIC c) Ethernet d) Packet transport

Last Answer : a) End system

_____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Description : _____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Last Answer : LLC

Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Description : Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Last Answer : Base header

In the layer hierarchy as the data packet moves from the upper to the lower layers, headers are ___________. A. Added B. Removed C. Rearranged D. Modified

Description : In the layer hierarchy as the data packet moves from the upper to the lower layers, headers are ___________. A. Added B. Removed C. Rearranged D. Modified

Last Answer : A. Added

In the layer hierarchy as the data packet moves from the upper to the lower layers, headers are ___________ a) Added b) Removed c) Rearranged d) Modified

Description : In the layer hierarchy as the data packet moves from the upper to the lower layers, headers are ___________ a) Added b) Removed c) Rearranged d) Modified

Last Answer : a) Added

Inthe _________ method, a special packet called a ______ circulates through the ring. A) reservation: control frame B) polling: poll request C) token passing: token D) none of the above

Description : Inthe _________ method, a special packet called a ______ circulates through the ring. A) reservation: control frame B) polling: poll request C) token passing: token D) none of the above

Last Answer : token passing: token

A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Description : A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Last Answer : virtual-circui

In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

A _______is defined as a small, fixed-size block of information. A) frame B) packet C) cell D) none of the above

Description : A _______is defined as a small, fixed-size block of information. A) frame B) packet C) cell D) none of the above

Last Answer : cell

An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Description : An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Last Answer : IP

Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet frame includes a CRC field and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Description : Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet ... and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Last Answer : Ethernet frame includes a CRC field and IP packet includes a checksum field

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errorsd. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

A network is a cross between a circuit-switched network and a datagram network. It has some characteristics of both. a. virtual-circuit b. packet-switchedc. None of the Given d. frame-switched

Description : A network is a cross between a circuit-switched network and a datagram network. It has some characteristics of both. a. virtual-circuit b. packet-switched c. None of the Given d. frame-switched

Last Answer : a. virtual-circuit

Transport layer receives data in the form of? A. Packets B. Byte streams C. Bits stream D. both packet and Byte stream

Description : Transport layer receives data in the form of? A. Packets B. Byte streams C. Bits stream D. both packet and Byte stream

Last Answer : B. Byte streams 

The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (bD)neither (a) nor (b)

Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)

Last Answer : neither (a) nor (b)

Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Description : Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Last Answer : the physical and data link layers

In IPv6,options are inserted between the _________and the ___________ data. A) baseheader;extensionheader B) baseheader;upper-layer data C) base header; frame header D) noneof the abov

Description : In IPv6,options are inserted between the _________and the ___________ data. A) baseheader;extensionheader B) baseheader;upper-layer data C) base header; frame header D) noneof the abov

Last Answer : baseheader;upper-layer data

Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Description : Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Last Answer : c. Both a & b

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

In IPv6, options are inserted between the _________ and the ___________ data A. base header; extension header B. base header; upper-layer data C. base header; frame header D. none of the above

Description : In IPv6, options are inserted between the _________ and the ___________ data A. base header; extension header B. base header; upper-layer data C. base header; frame header D. none of the above

Last Answer : B. base header; upper-layer data

Which of the following is not a congestion policy at network layer? a. Flow Control Policy b. Packet Discard Policy c. Packet Lifetime Management Policy d. Routing Algorithm

Description : Which of the following is not a congestion policy at network layer? a. Flow Control Policy b. Packet Discard Policy c. Packet Lifetime Management Policy d. Routing Algorithm

Last Answer : a. Flow Control Policy

In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Description : In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Last Answer : network layer

In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer e. none of above

Description : In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer e. none of above

Last Answer : session layer

Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Description : Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Last Answer : physical

The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : network

The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : physical and data link

The..............layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation

Description : The..............layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation

Last Answer : A) Physical

In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Description : In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Last Answer : a.Application layer

In which layer of OSI session is first check and then data is transmitted a. Application layer b. Presentation layer c. Session layer d. Transport layer

Description : In which layer of OSI session is first check and then data is transmitted a. Application layer b. Presentation layer c. Session layer d. Transport layer

Last Answer : c. Session layer

Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layerc. Transport layer d. Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layer c. Transport layer d. Link layer

Last Answer : b. Session layer

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : d. Session layer

The _______ layer ensures interoperability between communicating devices through transformation of data into a mutually agreed upon format. a. network b. presentation c. transport d. data link

Description : The _______ layer ensures interoperability between communicating devices through transformation of data into a mutually agreed upon format. a. network b. presentation c. transport d. data link

Last Answer : b. presentation

The _____ layer lies between the session layer and he application layer. a. network b. transport c. data link d. presentation

Description : The _____ layer lies between the session layer and he application layer. a. network b. transport c. data link d. presentation

Last Answer : d. presentation

The session layer lies between the ______layer and the presentation layer. a. network b. transport c. data link d. application

Description : The session layer lies between the ______layer and the presentation layer. a. network b. transport c. data link d. application

Last Answer : b. transport

Transport layer can identify the symptoms of overload nodes using _________ a. Flow control b. Traffic control c. Byte orientation d. Data integrity

Description : Transport layer can identify the symptoms of overload nodes using _________ a. Flow control b. Traffic control c. Byte orientation d. Data integrity

Last Answer : b. Traffic control

Using which method in transport layer data integrity can be ensured? a. Checksum b. Repetition codes c. Cyclic redundancy checks d. Error correcting codes

Description : Using which method in transport layer data integrity can be ensured? a. Checksum b. Repetition codes c. Cyclic redundancy checks d. Error correcting codes

Last Answer : a. Checksum

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Last Answer : a. all UDP packets are treated independently by transport layer

Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received ... order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Last Answer : a. all UDP packets are treated independently by transport layer