Header of a frame generally contains a. synchronization bytes b. addresses c. frame identifier d. all of the mentioned

Header of a frame generally contains
a. synchronization bytes
b. addresses
c. frame identifier
d. all of the mentioned
by

1 Answer

Answer :

d. all of the mentioned
by

Related questions

Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Description : Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Last Answer : D. all of the mentioned

In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400bytes? A) 428 B) 407 C) 107 D) 427

Description : In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400bytes? A) 428 B) 407 C) 107 D) 427

Last Answer : 428

In IPv4 header, an HLEN value of decimal 10 means_______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 10bytes inthe header D) thereare 40 bytes in the header

Description : In IPv4 header, an HLEN value of decimal 10 means_______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 10bytes inthe header D) thereare 40 bytes in the header

Last Answer : thereare 40 bytes in the header

What is the maximum size of data that the application layer can pass on to the TCP layer below? a. Any size b. 216 bytes - size of TCP header c. 216 bytes d. 1500

Description : What is the maximum size of data that the application layer can pass on to the TCP layer below? a. Any size b. 216 bytes - size of TCP header c. 216 bytes d. 1500

Last Answer : a. Any size

An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes. The number of fragments that the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

The IPv4 header size _______ A. is 20 to 60 bytes long B. is always 20 bytes long C. is always 60 bytes long D. depends on the MTU

Description : The IPv4 header size _______ A. is 20 to 60 bytes long B. is always 20 bytes long C. is always 60 bytes long D. depends on the MTU

Last Answer : A. is 20 to 60 bytes long

In IPv4 header, an HLEN value of decimal 10 means _______ A. there are 10 bytes of options B. there are 40 bytes of optionsC. there are 10 bytes in the header D. there are 40 bytes in the header

Description : In IPv4 header, an HLEN value of decimal 10 means _______ A. there are 10 bytes of options B. there are 40 bytes of options C. there are 10 bytes in the header D. there are 40 bytes in the header

Last Answer : D. there are 40 bytes in the header

Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Description : Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Last Answer : c. Both a & b

State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). An IPV6 packet consists of an IPV6 header and an IPV6 payload. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). ... C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : A. 1. True, 2. true, 3. true

In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Description : In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Last Answer : (4) 5 bytes 

In IPv6,options are inserted between the _________and the ___________ data. A) baseheader;extensionheader B) baseheader;upper-layer data C) base header; frame header D) noneof the abov

Description : In IPv6,options are inserted between the _________and the ___________ data. A) baseheader;extensionheader B) baseheader;upper-layer data C) base header; frame header D) noneof the abov

Last Answer : baseheader;upper-layer data

In IPv6, options are inserted between the _________ and the ___________ data A. base header; extension header B. base header; upper-layer data C. base header; frame header D. none of the above

Description : In IPv6, options are inserted between the _________ and the ___________ data A. base header; extension header B. base header; upper-layer data C. base header; frame header D. none of the above

Last Answer : B. base header; upper-layer data

The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Last Answer : 1518

In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Description : In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Last Answer : from left to the right, bottom to top

In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Last Answer : 1

In Frame Relay, an address can be________ bytes. A) only 2 B) 2 to 3 C) 2 to 4 D) none of the above

Description : In Frame Relay, an address can be________ bytes. A) only 2 B) 2 to 3 C) 2 to 4 D) none of the above

Last Answer : 2 to 4

The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Last Answer : b. 250 bytes

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Description : A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Last Answer : bridge

In IPv6, the _______ field inthe baseheader and thesender IP address combineto indicate aunique path identifier for aspecific flow of data. A) flow label B) nextheader C) hoplimit D) destination IP address

Description : In IPv6, the _______ field inthe baseheader and thesender IP address combineto indicate aunique path identifier for aspecific flow of data. A) flow label B) nextheader C) hoplimit D) destination IP address

Last Answer : flow label

In process to process delivery, an application process is assigned a ………….., which is likely to be …………….each time that process is started A. process identifier number , different B. process identifier number, same C. source, mixed D. Source, similar

Description : In process to process delivery, an application process is assigned a ………….., which is likely to be …………….each time that process is started A. process identifier number , different B. process identifier number, same C. source, mixed D. Source, similar

Last Answer : A. process identifier number , different

An application process is assigned a process identifier number (process ID), which is likely to be _______ each time that process is started. A. Similar B. smaller C. different D. larger

Description : An application process is assigned a process identifier number (process ID), which is likely to be _______ each time that process is started. A. Similar B. smaller C. different D. larger

Last Answer : C. different

In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400 bytes?

Description : In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400 bytes?

Last Answer : 428

Header of datagram in IPv4 has _________ a) 0 to 20 bytes b) 20 to 40 bytes c) 20 to 60 bytes d) 20 to 80 bytes

Description : Header of datagram in IPv4 has _________ a) 0 to 20 bytes b) 20 to 40 bytes c) 20 to 60 bytes d) 20 to 80 bytes

Last Answer : c) 20 to 60 bytes

The maximum size of the data that the application layer can pass on to the TCP layer below is ......... (1) 216 bytes (2) 216 bytes + TCP header length (3) 216 bytes - TCP header length (4) 215 bytes

Description : The maximum size of the data that the application layer can pass on to the TCP layer below is ......... (1) 216 bytes (2) 216 bytes + TCP header length (3) 216 bytes - TCP header length (4) 215 bytes

Last Answer : Answer: Marks to all

In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Description : In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Last Answer : synchronization

In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit provides synchronization. A) Manchester B) differential ManchesteC) both (a) and (b) D) neither (a) nor (b)r

Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

______ provides synchronization without increasingthe number of bits. A) Scrambling B) Line coding C) Block coding D) None of the above

Description : ______ provides synchronization without increasingthe number of bits. A) Scrambling B) Line coding C) Block coding D) None of the above

Last Answer : Scrambling

_____ provides redundancy toensure synchronization and inherent errordetection. A) Block coding B) Line coding C) Scrambling D) None of the above

Description : _____ provides redundancy toensure synchronization and inherent errordetection. A) Block coding B) Line coding C) Scrambling D) None of the above

Last Answer : Block coding

Block coding can help in _______at the receiver. A) Synchronization B) Error detection C) Attenuation D) (a) and (b)

Description : Block coding can help in _______at the receiver. A) Synchronization B) Error detection C) Attenuation D) (a) and (b)

Last Answer : (a) and (b)

Which is the main function of transport layer? A) Node to node delivery B) End to end delivery C) Synchronization d) Updating and maintaining routing tables

Description : Which is the main function of transport layer? A) Node to node delivery B) End to end delivery C) Synchronization d) Updating and maintaining routing tables

Last Answer : B) End to end delivery

Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layerc. Transport layer d. Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layer c. Transport layer d. Link layer

Last Answer : b. Session layer

Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layerc. Transport layer d. Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layer c. Transport layer d. Link layer

Last Answer : b. Session layer

Delimiting and synchronization of data exchange is provided by __________ a) Application layer b) Session layer c) Transport layer d) Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a) Application layer b) Session layer c) Transport layer d) Link layer

Last Answer : b) Session layer

In T1 digital system, the frame synchronization code repeats every

Description : In T1 digital system, the frame synchronization code repeats every

Last Answer : In T1 digital system, the frame synchronization code repeats every 125 microsecond

In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Last Answer : CRC

Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does not divide 1+x^k, for any k not exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Description : Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does ... exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Last Answer : c. 1+x is a factor of G(x)

HTTP resources are located by a. unique resource locator b. unique resource identifier c. none of the mentioned d. uniform resource identifier

Description : HTTP resources are located by a. unique resource locator b. unique resource identifier c. none of the mentioned d. uniform resource identifier

Last Answer : d. uniform resource identifier

What is the maximum possible length of an identifier? a) 31 characters b) 63 characters c) 79 characters d) none of the mentioned

Description : What is the maximum possible length of an identifier? a) 31 characters b) 63 characters c) 79 characters d) none of the mentioned

Last Answer : C

What is the main difference between DDCMP and SDLC? a. DDCMP does not need special hardware to final the beginning of a message b. DDCMP has a message header c. SDLC has a IP address d. SDLC does not use CRC

Description : What is the main difference between DDCMP and SDLC? a. DDCMP does not need special hardware to final the beginning of a message b. DDCMP has a message header c. SDLC has a IP address d. SDLC does not use CRC

Last Answer : DDCMP does not need special hardware to final the beginning of a message

In IPv6, when a datagram needs tobediscarded ina congested network, the decision is basedon the _______ field in thebase header. A) hop limit B) priority C) nextheader D) noneof the above

Description : In IPv6, when a datagram needs tobediscarded ina congested network, the decision is basedon the _______ field in thebase header. A) hop limit B) priority C) nextheader D) noneof the above

Last Answer : priority

n IPv4,an HLEN value ofdecimal10 means _______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 40bytes inthe header D) noneof the above

Description : n IPv4,an HLEN value ofdecimal10 means _______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 40bytes inthe header D) noneof the above

Last Answer : there are 40bytes inthe header

In IPv6, the _______ field inthe baseheader restricts the lifetime ofa datagram. A) version B) next-header C) hoplimit D) neighbor-advertisemen

Description : In IPv6, the _______ field inthe baseheader restricts the lifetime ofa datagram. A) version B) next-header C) hoplimit D) neighbor-advertisemen

Last Answer : hoplimit

Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Description : Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Last Answer : Base header

The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : the IP address of therouter found inthe routing table

f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : hedestination IP address in the datagram header

Which one of the following statements is NOT correct about HTTP cookies? a. A cookies is a piece of code that has the potential to compromise the security of an Internet user b. A cookie gains entry to the user’s work area through an HTTP header c. A cookie has an expiry date and time d. Cookies can be used to track the browsing pattern of a user at a particular site

Description : Which one of the following statements is NOT correct about HTTP cookies? a. A cookies is a piece of code that has the potential to compromise the security of an Internet user b. A cookie gains entry ... and time d. Cookies can be used to track the browsing pattern of a user at a particular site

Last Answer : a. A cookies is a piece of code that has the potential to compromise the security of an Internet user