Transport layer is implemented in _________ a. End system b. NIC c. Ethernet d. Signal transmission

Transport layer is implemented in _________
a. End system
b. NIC
c. Ethernet
d. Signal transmission
by

1 Answer

Answer :

a. End system
by

Related questions

Application layer is implemented in _______ a. End system b. NIC c. Ethernet d. Packet transport

Description : Application layer is implemented in _______ a. End system b. NIC c. Ethernet d. Packet transport

Last Answer : a. End system

Application layer is implemented in ____________ a) End system b) NIC c) Ethernet d) Packet transport

Description : Application layer is implemented in ____________ a) End system b) NIC c) Ethernet d) Packet transport

Last Answer : a) End system

What type of network device allows youto share your connection to the Internet with other computers in your home? A) Ethernet card B) NIC C) Router D) Cat 5

Description : What type of network device allows youto share your connection to the Internet with other computers in your home? A) Ethernet card B) NIC C) Router D) Cat 5

Last Answer : Router

Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Last Answer : a) network layer

Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Description : Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Last Answer : A. receive sliding window.

ICMP is a _________ layer protocol. A) datalink B) transport C) network D) noneof the above

Description : ICMP is a _________ layer protocol. A) datalink B) transport C) network D) noneof the above

Last Answer : network

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : d. Session layer

Transport layer can identify the symptoms of overload nodes using _________ a. Flow control b. Traffic control c. Byte orientation d. Data integrity

Description : Transport layer can identify the symptoms of overload nodes using _________ a. Flow control b. Traffic control c. Byte orientation d. Data integrity

Last Answer : b. Traffic control

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : d. Session layer

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a) Application layerb) Transport layer c) Link layer d) Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a) Application layer b) Transport layer c) Link layer d) Session layer

Last Answer : d) Session layer

Transmission media lie below the_______ layer. A) physical B) network C) transport D) application

Description : Transmission media lie below the_______ layer. A) physical B) network C) transport D) application

Last Answer : physical

Which of the following is a transport layer protocol?a. stream control transmission protocol b. internet control message protocol c. neighbor discovery protocol d. dynamic host configuration protocol

Description : Which of the following is a transport layer protocol? a. stream control transmission protocol b. internet control message protocol c. neighbor discovery protocol d. dynamic host configuration protocol

Last Answer : a. stream control transmission protocol

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received ... order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Last Answer : a. all UDP packets are treated independently by transport layer

State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and UDP. 3). SCTP is a new reliable, message oriented transport layer protocol. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and ... , 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : D. 1.false, 2. true, 3. true

Which of the following is a transport layer protocol? A. stream control transmission protocol B. internet control message protocol C. neighbor discovery protocol D. dynamic host configuration protocol

Description : Which of the following is a transport layer protocol? A. stream control transmission protocol B. internet control message protocol C. neighbor discovery protocol D. dynamic host configuration protocol

Last Answer : A. stream control transmission protocol

The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport

Description : The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport

Last Answer : C. data link

In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : unicast

In _________, autonegotiation allows two devices to negotiate the mode or datarate of operation. A) Standard B) Fast Ethernet C) Gigabit Ethernet D) Ten-Gigabit Ethernet

Description : In _________, autonegotiation allows two devices to negotiate the mode or datarate of operation. A) Standard B) Fast Ethernet C) Gigabit Ethernet D) Ten-Gigabit Ethernet

Last Answer : Fast Ethernet

The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Last Answer : 1-persistent

The physical layer provides __________a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Description : The physical layer provides __________ a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Last Answer : d. all of the mentioned

The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal levelC. specification for IR over optical fiber D. all of the mentioned

Description : The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Last Answer : D. all of the mentioned

What specifications does physical layer provides __________. A. mechanical specifications of electrical connectors and cablesB. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Description : What specifications does physical layer provides __________. A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Last Answer : D. all of the mentioned

The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Description : The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Last Answer : d) all of the mentioned

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s.b. 2 c. 2.5 d. 5

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

IEEE 802.3ab defines Gigabit Ethernet transmission over unshieldedtwisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Last Answer : a. 1000 BASE-T

In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Last Answer : preamble

The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Description : The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Last Answer : data link

Which is the main function of transport layer? A) Node to node delivery B) End to end delivery C) Synchronization d) Updating and maintaining routing tables

Description : Which is the main function of transport layer? A) Node to node delivery B) End to end delivery C) Synchronization d) Updating and maintaining routing tables

Last Answer : B) End to end delivery

What interface card do you need toconnect to a network? A) ISP card B) Wireless card C) Router D) NIC

Description : What interface card do you need toconnect to a network? A) ISP card B) Wireless card C) Router D) NIC

Last Answer : NIC

The _____ houses the switches in token ring. A. transceiver B. nine-pin connector C. MAU D. NIC E. None of the above

Description : The _____ houses the switches in token ring. A. transceiver B. nine-pin connector C. MAU D. NIC E. None of the above

Last Answer : MAU

Which of the following is NOT true about User Datagram Protocol in transport layer?a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way handshake before sending datagrams c. It provides datagrams, suitable for modeling other protocols such as in IP tunneling or Remote Procedure Call and the Network File System d. The lack of retransmission delays makes it suitable for real-time applications

Description : Which of the following is NOT true about User Datagram Protocol in transport layer? a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way ... File System d. The lack of retransmission delays makes it suitable for real-time applications

Last Answer : b. It does three way handshake before sending datagrams

A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP trafficc. stop incoming traffic from a specific IP address but allow outgoing traffic to the same IP address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Description : A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP traffic c. stop ... address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Last Answer : d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

A _________ digital signal includes timing informationin the data beingtransmitted. A) self-synchronizingB)self-modulatedC)self-transmittedD)none of the above

Description : A _________ digital signal includes timing informationin the data beingtransmitted. A) self-synchronizing B) self-modulated C) self-transmitted D) none of the above

Last Answer : self-synchronizing

A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Last Answer : digital

Which one of the following is a version of UDP with congestion control? a. datagram congestion control protocol b. stream control transmission protocol c. structured stream transport d. user congestion control protocol

Description : Which one of the following is a version of UDP with congestion control? a. datagram congestion control protocol b. stream control transmission protocol c. structured stream transport d. user congestion control protocol

Last Answer : a. datagram congestion control protocol

Which one of the following is a version of UDP with congestion control? a. datagram congestion control protocol b. stream control transmission protocol c. structured stream transport d. user congestion control protocol

Description : Which one of the following is a version of UDP with congestion control? a. datagram congestion control protocol b. stream control transmission protocol c. structured stream transport d. user congestion control protocol

Last Answer : a. datagram congestion control protocol

Transmission media lie below thelayer. a. transport b. application c. physical d. network

Description : Transmission media lie below thelayer. a. transport b. application c. physical d. network

Last Answer : c. physical

Layer one of the OSI model is a. physical layer b. link layer c. transport layer d. network layer e. none of above

Description : Layer one of the OSI model is a. physical layer b. link layer c. transport layer d. network layer e. none of above

Last Answer : physical layer

In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Description : In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Last Answer : network layer

In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer e. none of above

Description : In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer e. none of above

Last Answer : session layer

Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Description : Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Last Answer : physical

The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : network

The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : physical and data link

Which of the following is not the layer of TCP/IP protocol? a. Application Layer b. Session Layer c. Transport Layer d. Internetwork layer

Description : Which of the following is not the layer of TCP/IP protocol? a. Application Layer b. Session Layer c. Transport Layer d. Internetwork layer

Last Answer : b. Session Layer