High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

High-level Data Link Control (HDLC) is a _______ protocol for communication over
point-to-pointand multipoint links.
A)
bit-oriented
B)
byte-oriented
C)
character-oriented
D)
none of the above
by

1 Answer

Answer :

bit-oriented
by

Related questions

The most common protocol for point-to-pointaccess is the Point-to-Point Protocol (PPP), which is a _________protocol. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : The most common protocol for point-to-pointaccess is the Point-to-Point Protocol (PPP), which is a _________protocol. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : byte-oriented

HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for Modems) b. Frame Relay protocol as LAPF (Link Access Procedure for Frame Relay) c. ISDN (Integrated Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Last Answer : d. All the above

Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Description : Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Last Answer : A. receive sliding window.

Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Description : Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Last Answer : d. all of the mentioned

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Last Answer : C. SLIP, PPP

In a _______ connection, more thantwo devices can share asingle link. A) point-to-point B) multipoint C) primary D) secondary

Description : In a _______ connection, more thantwo devices can share asingle link. A) point-to-point B) multipoint C) primary D) secondary

Last Answer : multipoint

Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Description : Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Last Answer : c. Both CSMA/CD & CSMA/CA

Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Description : Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Last Answer : C. Both CSMA/CD & CSMA/CA

_____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Description : _____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Last Answer : LLC

In a ________ connection, three or more devices share a link. A) multipoint B) point-to-point C) (a) and(b) D) none of the above

Description : In a ________ connection, three or more devices share a link. A) multipoint B) point-to-point C) (a) and(b) D) none of the above

Last Answer : multipoint

In a ______ connection, twoand only two devicesare connected bya dedicated link. A) multipoint B) point-to-point C) (a) and(b) D) none of the above

Description : In a ______ connection, twoand only two devicesare connected bya dedicated link. A) multipoint B) point-to-point C) (a) and(b) D) none of the above

Last Answer : point-to-point

A _______connection provides a dedicated link between twodevices. A) point-to-point B) multipoint C) primary D) secondary

Description : A _______connection provides a dedicated link between twodevices. A) point-to-point B) multipoint C) primary D) secondary

Last Answer : point-to-point

Three or more devices share a link in ________ connection. a) Unipoint b) Multipoint c) Point to point d) Simplex

Description : Three or more devices share a link in ________ connection. a) Unipoint b) Multipoint c) Point to point d) Simplex

Last Answer : b) Multipoint

Which operational mode/s of HDLC support/s the balanced configuration by governing point to point link connectivity in addition to the primary as well as secondary functions performed by the station?a. NRM b. ABM c. Both a & b d. None of the above

Description : Which operational mode/s of HDLC support/s the balanced configuration by governing point to point link connectivity in addition to the primary as well as secondary functions performed by the station? a. NRM b. ABM c. Both a & b d. None of the above

Last Answer : b. ABM

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Description : Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Last Answer : d. all of the mentioned

Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Description : Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Last Answer : d. all of the mentioned

Transmission control protocol is a) connection oriented protocol b) uses a three way handshake to establish a connection c) recievs data from application as a single stream d) all of the mentioned

Description : Transmission control protocol is a) connection oriented protocol b) uses a three way handshake to establish a connection c) recievs data from application as a single stream d) all of the mentioned

Last Answer : d) all of the mentioned

Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

Asynchronous protocol is A. message oriented B. clock oriented C. bit oriented D. character oriented

Description : Asynchronous protocol is A. message oriented B. clock oriented C. bit oriented D. character oriented

Last Answer : D. character oriented

The types of data services offered by an LLC (Logical Link Control) layer are a. Connectionless which is fast and unreliable b. Connection Oriented which is slow and reliable c. Both A and B d. None

Description : The types of data services offered by an LLC (Logical Link Control) layer are a. Connectionless which is fast and unreliable b. Connection Oriented which is slow and reliable c. Both A and B d. None

Last Answer : c. Both A and B

State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and UDP. 3). SCTP is a new reliable, message oriented transport layer protocol. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and ... , 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : D. 1.false, 2. true, 3. true

Transmission control protocol ___________ a) is a connection-oriented protocol b) is a connectionless protocol c) is a protocol working on application layer d) all of the mentioned

Description : Transmission control protocol ___________ a) is a connection-oriented protocol b) is a connectionless protocol c) is a protocol working on application layer d) all of the mentioned

Last Answer : a) is a connection-oriented protoco

The IP Control Protocol (IPCP) is the NCP for IP and is responsible for ………., …………., and disabling the IP protocol on both ends of the point-to-point link. A. Reframing , enabling B. Deleting, reframing C. configuring, enabling, D. configuring, reframing

Description : The IP Control Protocol (IPCP) is the NCP for IP and is responsible for ………., …………., and disabling the IP protocol on both ends of the point-to-point link. A. Reframing , enabling B. Deleting, reframing C. configuring, enabling, D. configuring, reframing

Last Answer : C. configuring, enabling,

The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Description : The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

The Open Shortest Path First (OSPF)protocol is an intradomain routing protocolbased on _______ routing. A) distancevector B) link state C) path vector D) none of the above

Description : The Open Shortest Path First (OSPF)protocol is an intradomain routing protocolbased on _______ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Description : Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Last Answer : cyclic redundancy codes

Which category of HDLC frames undergoes error and flow control mechanisms by comprising send and receive sequence numbers? a. Uframes b. Iframes c. Sframes d. All of the above

Description : Which category of HDLC frames undergoes error and flow control mechanisms by comprising send and receive sequence numbers? a. Uframes b. Iframes c. Sframes d. All of the above

Last Answer : Sframes

A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Description : A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Last Answer : point-to-point

In mesh topology, every device has a dedicated topology ofa. Point to point linking b. Both a and b c. Multipoint linking d. None of given

Description : In mesh topology, every device has a dedicated topology of a. Point to point linking b. Both a and b c. Multipoint linking d. None of given

Last Answer : a. Point to point linking

Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B is 128 kbps. What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Description : Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B ... What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Last Answer : b. 40

Which of the following places the common data elements in order from smallest to largest? a) Character, file, record, field, database b) Character, record, field, file, database c) Character, field, record, file, database d) Bit, byte, character, record, field, file, database

Description : Which of the following places the common data elements in order from smallest to largest? a) Character, file, record, field, database b) Character, record, field, file, database c) Character, field, record, file, database d) Bit, byte, character, record, field, file, database

Last Answer : d) Bit, byte, character, record, field, file, database

Which of the following places the common data elements in order from smallest to largest? 1) Character, file, record, field, database 2) Character, record, field, file, database 3) Character, field, record, file, database 4) Bit, byte, character, record, field, file, database

Description : Which of the following places the common data elements in order from smallest to largest? 1) Character, file, record, field, database 2) Character, record, field, file, database 3) Character, field, record, file, database 4) Bit, byte, character, record, field, file, database

Last Answer : 3) Character, field, record, file, database

A ________ is a 16-bit number used by the host-to-host protocol to identify to which higher- level protocol or application program (process) it must deliver incoming messages A. connection B. UDP C. port D. TCP

Description : A ________ is a 16-bit number used by the host-to-host protocol to identify to which higher- level protocol or application program (process) it must deliver incoming messages A. connection B. UDP C. port D. TCP

Last Answer : C. port

A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte

Description : A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte

Last Answer : 4 byte

A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : Eight bits

A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : Eight bits

A band is always equivalent to a. a byte b. a bit c. 100 bits d. none of above

Description : A band is always equivalent to a. a byte b. a bit c. 100 bits d. none of above

Last Answer : none of above

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above

Description : Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above

Last Answer : byte

The computer abbreviation KB usually means– (A) Key Block (B) Kernel Boot (C) Key Byte (D) Kit Bit (E) Kilo Byte

Description : The computer abbreviation KB usually means– (A) Key Block (B) Kernel Boot (C) Key Byte (D) Kit Bit (E) Kilo Byte

Last Answer : Kilo Byte

What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Description : What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Last Answer : a. 1 byte

the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Description : the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Last Answer : b. 2^(n-1)

In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : asynchronous serial

At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (bD)neither (a) nor (b)

Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)

Last Answer : neither (a) nor (b)