Consider the following statements. I. TCP connections are full duplex. II. TCP has no option for selective acknowledgment III. TCP connections are message streams. a. Only I is correct b. Only I and II are correct c. Only II and III are correct d. All of I, II and III are correct

Consider the following statements.
I. TCP connections are full duplex.
II. TCP has no option for selective
acknowledgment
III. TCP connections are message
streams.
a. Only I is correct
b. Only I and II are correct
c. Only II and III are correct
d. All of I, II and III are correct
by

1 Answer

Answer :

a. Only I is correct
by

Related questions

Inthe _________Protocol, ifno acknowledgment for aframe has arrived, we resend all outstanding frames. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Description : Inthe _________Protocol, ifno acknowledgment for aframe has arrived, we resend all outstanding frames. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Last Answer : Go-Back-N ARQ

Consider the assertions given below. Which among them prove to be beneficial for Persistent HTTP connections? A. Reduction in latency over the sub- sequent requests B. Pipeline-oriented connection over the requests and responses C. Increase in number of packets due to TCP opens D. Prevention in opening and closing of some TCP connections a. A & B b. C & D c. A & C d. B & B

Description : Consider the assertions given below. Which among them prove to be beneficial for Persistent HTTP connections? A. Reduction in latency over the sub- sequent requests B. Pipeline-oriented connection over the requests and responses C. Increase ... TCP connections a. A & B b. C & D c. A & C d. B & B

Last Answer : a. A & B

In one of the pairs of protocols given below, both the protocols can use multiple TCP connections between thesame client and the server. Which one is that? a. HTTP, FTP b. HTTP, TELNET c. FTP, SMTP d. HTTP, SMTP

Description : In one of the pairs of protocols given below, both the protocols can use multiple TCP connections between the same client and the server. Which one is that? a. HTTP, FTP b. HTTP, TELNET c. FTP, SMTP d. HTTP, SMTP

Last Answer : a. HTTP, FTP

Generally TCP is reliable and UDP is not reliable. DNS which has to be reliable uses UDP because a. UDP is slower b. DNS servers has to keep connections c. DNS requests are generally very small and fit well within UDP segments d. None of these

Description : Generally TCP is reliable and UDP is not reliable. DNS which has to be reliable uses UDP because a. UDP is slower b. DNS servers has to keep connections c. DNS requests are generally very small and fit well within UDP segments d. None of these

Last Answer : c. DNS requests are generally very small and fit well within UDP segments

State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been the mainstay for data communications. 3). Point-to-Point Protocol (PPP) is a network-specific standard protocol with STD number 51. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Description : State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been ... . false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Last Answer : D. 1. true, 2. false, 3. true

How the TCP connections are needed in FTP?

Description : How the TCP connections are needed in FTP?

Last Answer : FTP establishes two connections between the hosts. One connection is used for data transfer, the other for control information. The control connection uses very simple rules of communication. The data connection needs more complex rules due to the variety of data types transferred.

Which of the following is/are example(s) of stateful application layer protocols? (i) HTTP (ii) FTP (iii) TCP (iv) POP3 a. (i) and (ii) only b. (ii) and (iii) only c. (ii) and (iv) only d. (iv) only

Description : Which of the following is/are example(s) of stateful application layer protocols? (i) HTTP (ii) FTP (iii) TCP (iv) POP3 a. (i) and (ii) only b. (ii) and (iii) only c. (ii) and (iv) only d. (iv) only

Last Answer : c. (ii) and (iv) only

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii ... and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and UDP. 3). SCTP is a new reliable, message oriented transport layer protocol. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and ... , 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : D. 1.false, 2. true, 3. true

Which of the following statements are correct? I. Rann of Kachchh is formed by the recession of the sea. II. Kuchaman, Sambhar and Didwana are salt water lakes. III. The land to the east of Aravallis is known as Bagar. IV. The fertile flood plains formed by small streams in Rajasthan are known as Rohi. (1) I, II and IV (2) I, III and IV (3) II, III and IV (4) I, II, III and IV

Description : Which of the following statements are correct? I. Rann of Kachchh is formed by the recession of the sea. II. Kuchaman, Sambhar and Didwana are salt water lakes. III. The land to the east of Aravallis is known as Bagar. IV. The ... II and IV (2) I, III and IV (3) II, III and IV (4) I, II, III and IV

Last Answer : (1) I, II and IV

ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring filesfrom one machine to another C. a protocol used to monitor computersD.a protocol that handles error andcontrol messagesE.None of the above

Description : ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring ... to monitor computers D. a protocol that handles error andcontrol messages E. None of the above

Last Answer : a protocol that handles error andcontrol messages

The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

In SMTP mail transaction flow, the sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ………. a. 220 service ready message b. 421 service not available message c. Both of the above d. None of the above

Description : In SMTP mail transaction flow, the sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ………. a. 220 service ready message b. 421 service not available message c. Both of the above d. None of the above

Last Answer : c. Both of the above

The sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ____ Service ready message.. A. 420 B. 320 C. 220 D. 120

Description : The sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ____ Service ready message.. A. 420 B. 320 C. 220 D. 120

Last Answer : C. 220

A best-effort delivery service suchas IPv4 includes _______. A) error checking B) error correction C) datagram acknowledgment D) noneof the above

Description : A best-effort delivery service suchas IPv4 includes _______. A) error checking B) error correction C) datagram acknowledgment D) noneof the above

Last Answer : noneof the above

In computer networks _________ is a characteristic that a flow needs where Lack of it means losing a packet or acknowledgment, which entails retransmission. A. Reliability B. Delay C. Jitter D. Bandwidth

Description : In computer networks _________ is a characteristic that a flow needs where Lack of it means losing a packet or acknowledgment, which entails retransmission. A. Reliability B. Delay C. Jitter D. Bandwidth

Last Answer : A. Reliability

At the time Linux 2.0 kernel configuration the option…………………... adds TCP/IP networking to the kernel. A. CONFIG_IP_ACCTB. CONFIG_INET C. CONFIG_INET_PCTCP D. CONFIG_IP_FORWARD

Description : At the time Linux 2.0 kernel configuration the option…………………... adds TCP/IP networking to the kernel. A. CONFIG_IP_ACCT B. CONFIG_INET C. CONFIG_INET_PCTCP D. CONFIG_IP_FORWARD

Last Answer : B. CONFIG_INET

Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex

Description : Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex

Last Answer : B) Half-duplex

A transmission mode that can transmit data in both the directions but transmits in only one direction at a time. a) simplex b) half duplex c) full duplex d) semi-duplex

Description : A transmission mode that can transmit data in both the directions but transmits in only one direction at a time. a) simplex b) half duplex c) full duplex d) semi-duplex

Last Answer : b) half duplex

In genetic engineering, a DNA segment (gene) of interest, is transferred to the host cell through a vector. Consider the following four agents (i-iv) in this regard and select the correct option about which one or more of these can be used as a vector/vectors. (i) Bacterium (ii) Plasmid (iii)Plasmodium (iv) Bacteriophage (a) (i), (ii) and (iv) (b) (i) only (c) (i) and (iii) (d) (ii) and (iv)

Description : In genetic engineering, a DNA segment (gene) of interest, is transferred to the host cell through a vector. Consider the following four agents (i-iv) in this regard and select the correct option about which one or more of these ... ii) and (iv) (b) (i) only (c) (i) and (iii) (d) (ii) and (iv)

Last Answer : (d) (ii) and (iv)

Communiction circuits that transmit data in both directions but not at the same time are operating in a. a simplex mode b. a half duplex mode c. a full duplex mode d. an asynchronous mode

Description : Communiction circuits that transmit data in both directions but not at the same time are operating in a. a simplex mode b. a half duplex mode c. a full duplex mode d. an asynchronous mode

Last Answer : a half duplex mode

Which of the following communications lines is best suited to interactive processing applications? a. narrow band channel b. simplex lines c. full duplex lines d. mixed band channels

Description : Which of the following communications lines is best suited to interactive processing applications? a. narrow band channel b. simplex lines c. full duplex lines d. mixed band channels

Last Answer : full duplex lines

A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Description : A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Last Answer : multiplexer

Which data communication method is used to transmit the data over a serial communication link? a. simplex b. half-duplex c. full-duplex d. b and c e. None of above

Description : Which data communication method is used to transmit the data over a serial communication link? a. simplex b. half-duplex c. full-duplex d. b and c e. None of above

Last Answer : full-duplex

The interactive transmission of data within a time sharing system may be best suited to a. simplex lines b. half-duplex lines c. full duplex lines d. biflex-lines

Description : The interactive transmission of data within a time sharing system may be best suited to a. simplex lines b. half-duplex lines c. full duplex lines d. biflex-lines

Last Answer : half-duplex lines

Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

Data flow between two devices canoccur in a _______ way. A) simplex B) half-duplex C) full-duplex D) all of theabove

Description : Data flow between two devices canoccur in a _______ way. A) simplex B) half-duplex C) full-duplex D) all of theabove

Last Answer : all of theabove

In _______ transmission, the channel capacity is shared byboth communicatingdevices at all times. A) simplex B) half-duplex C) full-duplex D) half-simplex

Description : In _______ transmission, the channel capacity is shared byboth communicatingdevices at all times. A) simplex B) half-duplex C) full-duplex D) half-simplex

Last Answer : full-duplex

A television broadcast is anexample of_______ transmission. A) simplex B) half-duplex C) full-duplex D) automatic

Description : A television broadcast is anexample of_______ transmission. A) simplex B) half-duplex C) full-duplex D) automatic

Last Answer : simplex

Communication between acomputer and a keyboardinvolves______________ transmission. A) simplex B) half-duplex C) full-duplex D) automatic

Description : Communication between acomputer and a keyboardinvolves______________ transmission. A) simplex B) half-duplex C) full-duplex D) automatic

Last Answer : simplex

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

Which mode of Communication occurs between a computer and a keyboard. a. Automatic b. Half-duplex c. Full-duplex d. Simplex

Description : Which mode of Communication occurs between a computer and a keyboard. a. Automatic b. Half-duplex c. Full-duplex d. Simplex

Last Answer : d. Simplex

Which is not the legitimate transmission directions listed here? a. Simplex b. Half Duplex c. Full Duplex d. Double Duplex

Description : Which is not the legitimate transmission directions listed here? a. Simplex b. Half Duplex c. Full Duplex d. Double Duplex

Last Answer : d. Double Duplex

Telephone networks operate in this mode. a) simplex b) half duplex c) full duplex d) semi-duplex

Description : Telephone networks operate in this mode. a) simplex b) half duplex c) full duplex d) semi-duplex

Last Answer : c) full duplex

A communication between a computer and a keyboard involves ____________ transmission. a) simplex b) half duplex c) full duplex d) semi-duplex

Description : A communication between a computer and a keyboard involves ____________ transmission. a) simplex b) half duplex c) full duplex d) semi-duplex

Last Answer : a) simplex

State whether the following statements are true/false: 1) The standards of TCP/IP are published in a series of documents called NFC. 2) A Protocol is an agreement between the communicating parties on how communication is to proceed. a. 1.F,2.T b. 1.F, 2.F c. 1.T, 2.T d. 1.T, 2.F

Description : State whether the following statements are true/false: 1) The standards of TCP/IP are published in a series of documents called NFC. 2) A Protocol is an agreement between the communicating parties on how communication is to proceed. a. 1.F,2.T b. 1.F, 2.F c. 1.T, 2.T d. 1.T, 2.F

Last Answer : a. 1.F,2.T

Read the following four statements, (i), (ii), (iii) and (iv) and select the right option having both correct statements. Statements : (i) Z scheme of light reaction takes place in presence of PSI only. (ii) Only PSI is functional in cyclic photophosphorylation. (iii)Cyclic photophosphorylation results into synthesis of ATP and NADPH2. (iv) Stroma lamellae lack PSII as well as NADP. (a) (ii) and (iv) (b) (i) and (ii) (c) (ii) and (iii) (d) (iii) and (iv)

Description : Read the following four statements, (i), (ii), (iii) and (iv) and select the right option having both correct statements. Statements : (i) Z scheme of light reaction takes place in presence of PSI only. (ii) Only PSI is ... and (iv) (b) (i) and (ii) (c) (ii) and (iii) (d) (iii) and (iv)

Last Answer : (a) (ii) and (iv)

Which of the following communication modes support two-way traffic but in only one direction at a time? a. simplex b. half duplex c. three-quarters duplex d. all of the above e. none of the above

Description : Which of the following communication modes support two-way traffic but in only one direction at a time? a. simplex b. half duplex c. three-quarters duplex d. all of the above e. none of the above

Last Answer : half duplex

The communication modethat supports two-way traffic but only one direction at atime is A. simplex B. duplex C. half duplex D. multiplex E. None of the above

Description : The communication modethat supports two-way traffic but only one direction at atime is A. simplex B. duplex C. half duplex D. multiplex E. None of the above

Last Answer : half duplex

The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can receive and send datasimultaneously C. can sendor receive data one ata time D. can do one way data transmission only E. None of the above

Description : The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can ... data one ata time D. can do one way data transmission only E. None of the above

Last Answer : can do one way data transmission only

Explain how TCP connections are established using the 3 way handshake. What happens when 2 hosts simultaneously try to establish a connection?

Description : Explain how TCP connections are established using the 3 way handshake. What happens when 2 hosts simultaneously try to establish a connection?

Last Answer : If 2 host Simultaneously try to establish connection: Simultaneous Open: * It's possible for two applications to send a SYN to each other to start a TCP connection, although the possibility is small, ... . * The CLOSING state takes the place of FIN-WAIT-2 or CLOSEWAIT in a common scenario.

Identify the correct order in which the following actions take place in an interaction between a web browser and a web server. 1. The web browser requests a webpage using HTTP. 2. The web browser establishes a TCP connection with the web server. 3. The web server sends the requested webpage using HTTP. 4. The web browser resolves the domain name using DNS. a. 4,2,1,3 b. 1,2,3,4 c. 4,1,2,3 d. 2,4,1,3

Description : Identify the correct order in which the following actions take place in an interaction between a web browser and a web server. 1. The web browser requests a webpage using HTTP. 2. The web browser establishes a TCP connection with the web ... DNS. a. 4,2,1,3 b. 1,2,3,4 c. 4,1,2,3 d. 2,4,1,3

Last Answer : a. 4,2,1,3

Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half duplex line is a communication line in which data can move in two directions, but not at the same time. c. Teleprocessing combines telecommunications and DP techniques in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control