Description : The interactive transmission of data within a time sharing system may be best suited to a. simplex lines b. half-duplex lines c. full duplex lines d. biflex-lines
Last Answer : half-duplex lines
Description : A television broadcast is anexample of_______ transmission. A) simplex B) half-duplex C) full-duplex D) automatic
Last Answer : simplex
Description : Communication between acomputer and a keyboardinvolves______________ transmission. A) simplex B) half-duplex C) full-duplex D) automatic
Description : Which is not the legitimate transmission directions listed here? a. Simplex b. Half Duplex c. Full Duplex d. Double Duplex
Last Answer : d. Double Duplex
Description : A communication between a computer and a keyboard involves ____________ transmission. a) simplex b) half duplex c) full duplex d) semi-duplex
Last Answer : a) simplex
Description : A transmission mode that can transmit data in both the directions but transmits in only one direction at a time. a) simplex b) half duplex c) full duplex d) semi-duplex
Last Answer : b) half duplex
Description : Data flow between two devices canoccur in a _______ way. A) simplex B) half-duplex C) full-duplex D) all of theabove
Last Answer : all of theabove
Description : Operating method in which the transmission is made alternately in each direction of a telecommunication channel A. Semi-duplex operation B. Duplex operation C. Half-duplex operation D. Simplex operation
Last Answer : C. Half-duplex operation
Description : Which of the following communications lines is best suited to interactive processing applications? a. narrow band channel b. simplex lines c. full duplex lines d. mixed band channels
Last Answer : full duplex lines
Description : Communiction circuits that transmit data in both directions but not at the same time are operating in a. a simplex mode b. a half duplex mode c. a full duplex mode d. an asynchronous mode
Last Answer : a half duplex mode
Description : Which data communication method is used to transmit the data over a serial communication link? a. simplex b. half-duplex c. full-duplex d. b and c e. None of above
Last Answer : full-duplex
Description : Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex
Last Answer : B) Half-duplex
Description : Which mode of Communication occurs between a computer and a keyboard. a. Automatic b. Half-duplex c. Full-duplex d. Simplex
Last Answer : d. Simplex
Description : Telephone networks operate in this mode. a) simplex b) half duplex c) full duplex d) semi-duplex
Last Answer : c) full duplex
Description : In mode, the communication channel is used in both directions at the same time? A) Full-duplex B) Simplex C) Half-duplex D) None of the above
Last Answer : Answer : A
Description : Which of the following communication modes support two-way traffic but in only one direction at a time? a. simplex b. half duplex c. three-quarters duplex d. all of the above e. none of the above
Last Answer : half duplex
Description : The communication modethat supports two-way traffic but only one direction at atime is A. simplex B. duplex C. half duplex D. multiplex E. None of the above
Description : Transmission sent in both directions simultaneously. A. Full duplex B. Duplex C. Half duplex D. Simplex
Last Answer : B. Duplex
Description : The transmission mode which allows both communicating devices to transmit and receive data simultaneously is: a) Full Duplex b) Simplex c) Half Duplex d) Simple Complex e) None of These
Last Answer : a) Full Duplex
Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)
Last Answer : both (a) and (b)
Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.
Last Answer : Batch processing is the prefered processing mode for telecommunication operation.
Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit
Last Answer : High-leveldata link control
Description : Computer to computer communication is: (A) Simplex (B) Duplex (C) Half Duplex (D) Both Duplex and Half Duplex
Last Answer : (B) Duplex
Description : A remote batch-processing operation in which data is solely input to a central computer would require a. telegraphp line b. simplex lines c. mixed bad channel d. all of above
Last Answer : simplex lines
Description : Most data communications involving telegraph lines use: a. simplex lines b. wideband channel c. narrowband channel d. dialed service
Last Answer : narrowband channel
Description : A remote batch-processing operation in which datais solely input toa central computer would requirea: A. telegraphline B. simplex lines C. mixed-band channel D. All the above E. None of the above
Description : The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can ... data one ata time D. can do one way data transmission only E. None of the above
Last Answer : can do one way data transmission only
Description : Differences between Simplex Maid and Full-Duplex Maid ?
Last Answer : Simplex mode allows data to be transmitted from one side only and data can be received from the other end only. In other words, in this case, an implementation is possible by sending or receiving data at ... . This means that in this case, Edge can send and receive data anywhere at the same time.
Description : Compare between simplex and full duplex communication on the basis of: 1) Definition 2) Sketch
Last Answer : Compare between simplex and full duplex communication on the basis of: 1) Definition 2) Sketch
Description : The word______ refers to the portion of a _______ that carriesa transmission. A) channel; link B) link; channel C) line; channel D) line; link
Last Answer : channel; link
Description : Binary symmetric channel uses (A) Half duplex protocol (B) Full duplex protocol (C) Bit oriented protocol (D) None of the above
Last Answer : (A) Half duplex protocol
Description : There are 10 users plugged into a hub running 10Mbps half-duplex.and a server connected to the switch running 10Mbps half- duplex as well. Find the bandwidth does each host have to the server? a. 100 kbps b. 1 Mbps c. 2 Mbps d. 10 Mbps
Last Answer : d. 10 Mbps
Description : The _______ is a unidirectional protocol that has no flow or error control. A. Simplest B. Simplex C. TCP/IP protocol D. Simplest or Simplex
Last Answer : D. Simplest or Simplex
Description : Which of the following is convenient between half-duplex and full-duplex transmission modes ?
Last Answer : Half-duplex transmission mode requires fewer devices. So half-duplex is convenient in terms of cost. Full-duplex is convenient in terms of data transmission. Because although it is possible to send data in ... receive data at the same time in half-duplex mode which is possible in full-duplex mode.
Description : Compare between simplex and duplex communication
Last Answer : simplex and duplex communication :
Description : A 400 W carrier is amplitude modulated to a depth of 75%.Calculate the total power in AM wave. (i) Explain the types of noise in a communication system. (ii) Compare simplex and duplex mode of communication.
Last Answer : (i) Noise: Noise is any spurious or undesired disturbances that mask the received signal in a communication system. a) Atmospheric Noise: Atmospheric Noise is also known as static noise which is the ... remote control ExamplesWalkytalky,telephone,mobile,Radar, FAX,Pager 4
Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58
Last Answer : b. 0.184
Description : A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation
Last Answer : c. multiplexing
Description : Communication channel is shared by all the machines on the network in ________ a) broadcast network b) unicast network c) multicast network d) anycast network
Last Answer : a) broadcast network
Description : Multicast link state routing uses the _______ tree approach. A) source-based B) group-shared C) a or b D) none of the above
Last Answer : source-based
Description : In the _______ treeapproach, each router needs tohave oneshortest path tree for each group. A) group-shared B) source-based C) a or b D) none of the above
Description : A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line
Last Answer : multiplexer
Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file
Last Answer : C) Multiplexer
Description : Consider the following statements. I. TCP connections are full duplex. II. TCP has no option for selective acknowledgment III. TCP connections are message streams. a. Only I is correct b. Only I and II are correct c. Only II and III are correct d. All of I, II and III are correct
Last Answer : a. Only I is correct
Description : If delaysare recorded as 10 bit numbers in a 50 router network, and delay vectorsare exchanged twicea second,how muchbandwidth per fill duplex line is occupied by the distributedrouting algorithm? A. 500 bps B. 1500 bps C. 5 bps D. 1000 bps
Last Answer : 1000 bps
Description : What are the two types of duplex?
Last Answer : Full duplex-two bit streams can be simultaneously transmitted over the links at the same time, one going in each direction. Half duplex-it supports data flowing in only one direction at a time.
Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec
Last Answer : a. 2 sec