Description : In _________, autonegotiation allows two devices to negotiate the mode or datarate of operation. A) Standard B) Fast Ethernet C) Gigabit Ethernet D) Ten-Gigabit Ethernet
Last Answer : Fast Ethernet
Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)
Last Answer : A passivehub
Description : Communiction circuits that transmit data in both directions but not at the same time are operating in a. a simplex mode b. a half duplex mode c. a full duplex mode d. an asynchronous mode
Last Answer : a half duplex mode
Description : A transmission mode that can transmit data in both the directions but transmits in only one direction at a time. a) simplex b) half duplex c) full duplex d) semi-duplex
Last Answer : b) half duplex
Description : Gigabit Ethernet has a datarate of________Mbps. A) 10 B) 100 C) 1000 D) 10,000
Last Answer : 1000
Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX
Last Answer : a. 1000 BASE-T
Description : Differentiate fast Ethernet and gigabit Ethernet.
Last Answer : 00-Mbps version called Fast Ethernet. 1000-Mbps version called Gigabit Ethernet. Both 100-Mbps and 1000-Mbps Ethernets are designed to be used in full-duplex, point-to-point configurations, which mean that they are typically used in switched networks.
Description : Which mode of Communication occurs between a computer and a keyboard. a. Automatic b. Half-duplex c. Full-duplex d. Simplex
Last Answer : d. Simplex
Description : Telephone networks operate in this mode. a) simplex b) half duplex c) full duplex d) semi-duplex
Last Answer : c) full duplex
Description : Data flow between two devices canoccur in a _______ way. A) simplex B) half-duplex C) full-duplex D) all of theabove
Last Answer : all of theabove
Description : In _______ transmission, the channel capacity is shared byboth communicatingdevices at all times. A) simplex B) half-duplex C) full-duplex D) half-simplex
Last Answer : full-duplex
Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.
Last Answer : Batch processing is the prefered processing mode for telecommunication operation.
Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit
Last Answer : High-leveldata link control
Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Last Answer : both (a) and (b)
Description : In mode, the communication channel is used in both directions at the same time? A) Full-duplex B) Simplex C) Half-duplex D) None of the above
Last Answer : Answer : A
Description : The transmission mode which allows both communicating devices to transmit and receive data simultaneously is: a) Full Duplex b) Simplex c) Half Duplex d) Simple Complex e) None of These
Last Answer : a) Full Duplex
Description : A commonly used fiber-based system for LANs is: a. FDDI b. high-speed Ethernet c. gigabit Ethernet d. all of the above
Last Answer : d. all of the above
Description : ………………….. is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbit/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above
Last Answer : B) Fast Ethernet
Description : ............ is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above
Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX
Last Answer : A) 1000 BASE-T
Description : is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above
Description : Which data communication method is used to transmit the data over a serial communication link? a. simplex b. half-duplex c. full-duplex d. b and c e. None of above
Description : The interactive transmission of data within a time sharing system may be best suited to a. simplex lines b. half-duplex lines c. full duplex lines d. biflex-lines
Last Answer : half-duplex lines
Description : A television broadcast is anexample of_______ transmission. A) simplex B) half-duplex C) full-duplex D) automatic
Last Answer : simplex
Description : Communication between acomputer and a keyboardinvolves______________ transmission. A) simplex B) half-duplex C) full-duplex D) automatic
Description : Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex
Last Answer : B) Half-duplex
Description : Which is not the legitimate transmission directions listed here? a. Simplex b. Half Duplex c. Full Duplex d. Double Duplex
Last Answer : d. Double Duplex
Description : A communication between a computer and a keyboard involves ____________ transmission. a) simplex b) half duplex c) full duplex d) semi-duplex
Last Answer : a) simplex
Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)
Last Answer : PCF
Description : _______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)
Description : Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)
Last Answer : band-pass
Description : Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet ... and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields
Last Answer : Ethernet frame includes a CRC field and IP packet includes a checksum field
Description : In _______ methods,a stationcannot send unless it hasbeen authorized byother stations. A) random access B) controlledaccess C) channelization D) none of the above
Last Answer : controlledaccess
Description : In _______ methods, the stations consult one another tofind which station has the right to send. A) random access B) controlledaccess C) channelization D) none of the above
Description : Which of the following communication modes support two-way traffic but in only one direction at a time? a. simplex b. half duplex c. three-quarters duplex d. all of the above e. none of the above
Last Answer : half duplex
Description : The communication modethat supports two-way traffic but only one direction at atime is A. simplex B. duplex C. half duplex D. multiplex E. None of the above
Description : There are 10 users plugged into a hub running 10Mbps half-duplex.and a server connected to the switch running 10Mbps half- duplex as well. Find the bandwidth does each host have to the server? a. 100 kbps b. 1 Mbps c. 2 Mbps d. 10 Mbps
Last Answer : d. 10 Mbps
Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above
Last Answer : 1-persistent
Description : In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above
Last Answer : c. Jam
Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above
Last Answer : 48-b
Description : The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above
Last Answer : data link
Description : The target hardware address on an Ethernet is _______ in an ARP request. A) 0x000000000000 B) 0.0.0.0 C) variable D) class dependent
Last Answer : 0x000000000000
Description : Application layer is implemented in _______ a. End system b. NIC c. Ethernet d. Packet transport
Last Answer : a. End system
Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above
Last Answer : a. Half the baud rate.
Description : A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b
Last Answer : both a and b
Description : In__________, eachstation is forced to send only at the beginning of the time slot. A) pure ALOHA B) slotted ALOHA C) both (a) and (b) D) neither (a) nor (b)
Last Answer : slotted ALOHA
Description : In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Last Answer : differential Manchester
Description : The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Last Answer : Manchester