Blast furnace gas burns with a bluish flame, because of the presence of
(A) CO
(B) CH4
(C) CO2
(D) S

1 Answer

Answer :

(A) CO

Related questions

Description : Coke oven gas burns with a yellowish flame, because of the presence of (A) CO2 (B) CH4 (C) H2 (D) NH3

Last Answer : (B) CH4

Description : Blast furnace gas is a very poisonous gas because of its predominantly high __________ content. (A) H2O (B) CO2 (C) CO (D) CH4

Last Answer : (C) CO

Description : Blast furnace gas constitutes mainly of (A) N2 & CH4 (B) N2 & H2 (C) N2 & CO (D) CH4 & CO2

Last Answer : (C) N2 & CO

Description : Which of the following combustibles is absent in blast furnace gas? (A) H2 (B) CH4 (C) CO (D) None of these

Last Answer : (B) CH4

Description : Anthracite coal (A) Contains more volatile matter than bituminous coal (B) Ignites more easily than bituminous coal (C) Is essentially a coking coal (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Last Answer : (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Description : Largest constituent of blast furnace gas is (A) N2 (B) CO (C) CO2 (D) H2

Last Answer : (A) N2

Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Which is the main reducing agent during production of iron from iron ore in a blast furnace? (A) C (B) CO (C) CO2 (D) H2

Last Answer : (B) CO

Description : Which of the following has the highest theoretical flame temperature? (A) Blast furnace gas (B) Hydrogen (C) Acetylene (D) Coke oven gas

Last Answer : (C) Acetylene

Description : Blast furnace gas compared to coke oven gas has (A) Lower ignition temperature (B) Narrower limit of inflammability (C) Higher calorific value (D) Lower theoretical flame temperature

Last Answer : (D) Lower theoretical flame temperature

Description : In the blast furnace, incorporation of water vapour in the blast gives the following effect. (A) Increases the reducing potential of the gas (B) Increases the flame temperature (C) No significant change occurs (D) Increases the hydrogen content in the metal

Last Answer : (A) Increases the reducing potential of the gas

Description : Coke oven gas consists mainly of (A) H2 & CH4 (B) CO & CO2 (C) H2 & CO (D) CH4 & CO

Last Answer : (A) H2 & CH4

Description : Coke oven gas constitutes mainly of (A) H2 & CO (B) H2 & CH4 (C) CH4 & CO (D) H2 & CO2

Last Answer : (B) H2 & CH4

Description : A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6 ... 96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74

Last Answer : (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02

Description : . Water gas constitutes mainly of (A) CO & H2 (B) CO & N2 (C) CO2 & H2 (D) CH4 & H2

Last Answer : (A) CO & H2

Description : Gobar gas constitutes mainly of (A) CH4 & CO2 (B) CO & CO2 (C) CH4 & N2 (D) CO & N

Last Answer : (A) CH4 & CO2

Description : Main constituents of purified Lurgi gas are (A) H2 , CmHn & CO2 (B) CO, H2 & CH4 (C) CO2 , O2 & CO (D) N2 , H2 & CO2

Last Answer : (B) CO, H2 & CH4

Description : Main constituent of the gas produced from a gobar gas plant is (A) CO2 (B) CH4 (C) H2 (D) CO

Last Answer : (B) CH4

Description : The gas which contributes maximum to the heating value of natural gas is (A) CO (B) CO2 (C) H2 (D) CH4

Last Answer : (D) CH4

Description : The principal gas evolved from sludge digestion tank is (A) CO (B) CO2 (C) CH4 (D) N2

Last Answer : (C) CH4

Description : The main type of sludge gas evolved during sewage treatment in Imhoff tank is (A) CO2 (B) CH4 (C) CO (D) H2

Last Answer : (B) CH4

Description : Coke oven gas consists mainly of (A) H2 , & CH4 (B) CO, & CO2 (C) H2 , & CO (D) CH4 , & CO

Last Answer : (A) H2 , & CH4

Description : Producer gas consists mainly of (A) CO, CO2 N2 , H2 (B) CO, H2 (C) H2 , CH4 (D) C2H2 , CO2 , H2

Last Answer : (A) CO, CO2 N2 , H2

Description : Synthesis gas is a mixture of (A) CO and H2 (B) N2 and H2 (C) H2 , CH4 and CO (D) CO2 and H2

Last Answer : (A) CO and H2

Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Last Answer : Option C

Description : Which of the following has the highest flame speed? (A) CO (B) H2 (C) CH4 (D) C2H6

Last Answer : (B) H2

Description : Which of the following has the highest flame velocity? (A) H2 (B) CO (C) CH4 (D) C2H6

Last Answer : (A) H2

Description : Producer gas is a mixture of (a) CO and H2 (b) CO and N2 (c) CH4 and H2 (d) CO2 and H2

Last Answer : Ans:(a)

Description : Given, 3H2 + CO = CH4 + H2O, KP = 10 1.84 and, 4H2 + CO2 = CH4 + 2H2O, KP = 10 1.17 the KP for the reaction CO + H2O = CO2 + H2 is (A) 10 3.01 (B) 10 -0.67 (C) 10 -3.01 (D) 10 0.67

Last Answer : (D) 10 0.67

Description : Pick out the endothermic reaction out of the following. (A) C+ ½O2 = CO (B) CO + 3H2 = CH4 + H2O (C) CaCO3 = CaO + CO2 (D) CO + ½O2 = CO2

Last Answer : (C) CaCO3 = CaO + CO2

Description : Blast furnace coke is made from coal by (A) Low temperature carbonisation (B) High temperature carbonisation (C) Medium temperature carbonisation (D) Heating the coal in an oven in presence of air

Last Answer : (B) High temperature carbonisation

Description : In order to maintain an oxidising atmosphere in a furnace, it should have (A) More of excess air (B) Less of excess air (C) More of CO in flue gas (D) More of CO2 in flue gas

Last Answer : (A) More of excess air

Description : Scaling of furnace stock is reduced by __________ in flue gas. (A) CO (B) H2 (C) High CO/CO2 (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Pollutants released from paddy field is a) CO2 b) CO c) H2O2 d) CH4. 

Last Answer : d) CH4.

Description : Colour imparted to the Bunsen flame by strontium salt is - (1) bluish green (2) apple-green (3) brick red (4) crimson red

Last Answer : (4) crimson red Explanation: A flame test is performed by introducing a sample into the blue flame of a bunsen burner and noting any change in the colour of the flame. The tests can be used ... metallic elements in salts. With strontium salt, the colour of Bunsen flame ranges from crimson to red.

Description : Colour imparted to the Bunsen flame by strontium salt is (1) bluish green (2) apple-green (3) brick red (4) crimson red

Last Answer : crimson red

Description : Which of the following is the most reactive (as regards the formation of CO + H2 from C + H2O)? (A) Blast furnace coke (B) Low temperature coke (C) Anthracite coal (D) Sub-bituminous coa

Last Answer : (B) Low temperature coke

Description : A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation (C) Ignites easily and burns with long smoky flame (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation (C) Ignites easily and burns with long smoky flame (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Calorific value of gobar gas (containing CH4 = 60% , H2 = 10% ; CO2 = 30%) may be about __________ Kcal/Nm3 . (A) 1,800 (B) 3,200 (C) 5,400 (D) 10,200

Last Answer : (C) 5,400

Description : The calorific value of a gas of composition CO2 = 20%, H2 = 50%, CH4 = 30%, is y. If the composition of gas is changed to H2 = 50%, CH4 = 30%, CO2 = 10%, N2 = 10%, then the calorific value will be (A) y (B) 0.95 y (C) 1.05 y (D) 1.8 y

Last Answer : (A) y

Description : Main component of sewage gas produced during anaerobic decomposition of organic waste (by suitable bacteria) during sewage disposal is (A) H2 (B) CH4 (C) CO2 (D) N2

Last Answer : (B) CH4

Description : In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of (A) Use of non-preheated combustion air (B) Use of pulverised solid ... of fuel & air and infiltration of air (D) Use of excessive positive draft in the furnace

Last Answer : (C) Imperfect mixing of fuel & air and infiltration of air

Description : Incomplete combustion of fuel in the furnace is judged by high __________ of the flue gases. (A) CO content (B) Dew point (C) CO2 content (D) O2 content

Last Answer : (A) CO content

Description : In sewers the gas generally found, is A. Hydrogen sulphide (H2S) B. Carbon dioxide (CO2) C. Methane (CH4) D. All the above

Last Answer : ANS: D

Description : Gobar gas contains mainly (a) CO2 + H2 (b) CO2 + H2O (c) CH4 only (d) CH4 + CO2.

Last Answer : (d) CH4 + CO2.

Description : Which gas is released from paddy fields? a) CO2 b) H2S c) CH4 d) NH3

Last Answer : c) CH4

Description : Identify the type of reaction(s) in the following equations. (i)CH4 + 2O2 CO2 + 2 H2O (ii) Pb(NO3)2 + 2KI ——–>Pbl2 + 2KNOs (iii) CaO + H2O ——–> Ca(OH)2 (iv) CuSO4 + Zn ——–> ZnSO4 + Cu -Chemistry

Last Answer : Answer. (i) Combustion reaction and oxidation reaction. (ii)Double displacement reaction and precipitation reaction. (iii) Combination reaction. (iv) Displacement reaction.

Description : The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Last Answer : (C) Electro-static precipitator

Description : Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of (A) Furnace oil with air (B) Furnace oil with oxygen (C) Blast furnace gas with air (D) Blast furnace gas with oxygen

Last Answer : (C) Blast furnace gas with air