Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE are engineering stress and engineering strain respectively (C) Phosphorous can be easily recovered in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Pick out the wrong statement.
(A) Cold cracking of a weld is due to the presence of hydrogen gas in the
weld
(B) True stress is given by, σ = σE (1 + εE), where σE and εE are engineering
stress and engineering strain respectively
(C) Phosphorous can be easily recovered in the iron blast furnace
(D) High residual stress at the surface is beneficial for fatigue properties of a
material
by

1 Answer

Answer :

Option C
by

Related questions

Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon gases carburise the surface of steel at annealing temperatures (C) Active nitrogen (formed by cracking ammonia at the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Description : Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon ... the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its fatigue strength (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Description : Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its ... (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Last Answer : (C) Cold working of a metal decreases its fatigue strength

Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct process of by-product recovery (C) A high swelling index number of coking coal indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Cold cracking in the heat affected zone of a high strength steel weld can take place because of the (A) Retained austenite (B) Martensite formation (C) Relatively high sulphur content in the base metal (D) Sufficient hydrogen present in the welding arc

Description : Cold cracking in the heat affected zone of a high strength steel weld can take place because of the (A) Retained austenite (B) Martensite formation (C) Relatively high sulphur content in the base metal (D) Sufficient hydrogen present in the welding arc

Last Answer : (B) Martensite formation

The relationship between the alternating stress and mean stress is given by the following equation: σ a =σ e [1-(σ m /σ u )x], where σ e is the fatigue limit for completely reversed loading. The value of x for Gerber line is equal to _________ a) 1 b) 2 c) 0.5 d) -1

Description : The relationship between the alternating stress and mean stress is given by the following equation: σ a =σ e [1-(σ m /σ u )x], where σ e is the fatigue limit for completely reversed loading. The value of x for Gerber line is equal to _________ a) 1 b) 2 c) 0.5 d) -1

Last Answer : b) 2

Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco-elastic material, stress-strain relation is dependent on time (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Description : Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco ... (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Last Answer : (D) All the above

In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Description : In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Last Answer : (C) Appreciable strain hardening is produced

Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to the decrease in electron movement (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Most of the phosphorous present in the blast furnace burden enters into (A) Hot metal (B) Flue gases (C) Slag (D) Refractory lining

Description : Most of the phosphorous present in the blast furnace burden enters into (A) Hot metal (B) Flue gases (C) Slag (D) Refractory lining

Last Answer : (A) Hot metal

Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Description : Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Last Answer : (A) Tin can be readily and very easily drawn into very fine wire

Blast furnace gas burns with a bluish flame, because of the presence of (A) CO (B) CH4 (C) CO2 (D) S

Description : Blast furnace gas burns with a bluish flame, because of the presence of (A) CO (B) CH4 (C) CO2 (D) S

Last Answer : (A) CO

Pick out the wrong statement. (A) Yellow phosphorous which is the most reactive allotropic form of phosphorous is transported under water (B) Apatite is the principal material present in phosphate rock which is chemically Ca10 (PO4 )6 (F, Cl, OH) (C) Urea is more hygroscopic than ammonium nitrate (D) Nitrogen fixation means the process of bringing atmospheric nitrogen into combination i.e. into nitrogen compound fo

Description : Pick out the wrong statement. (A) Yellow phosphorous which is the most reactive allotropic form of phosphorous is transported under water (B) Apatite is the principal material present in ... fixation means the process of bringing atmospheric nitrogen into combination i.e. into nitrogen compound fo

Last Answer : (C) Urea is more hygroscopic than ammonium nitrate

Which of the following has the highest theoretical flame temperature? (A) Blast furnace gas (B) Hydrogen (C) Acetylene (D) Coke oven gas

Description : Which of the following has the highest theoretical flame temperature? (A) Blast furnace gas (B) Hydrogen (C) Acetylene (D) Coke oven gas

Last Answer : (C) Acetylene

In the blast furnace, incorporation of water vapour in the blast gives the following effect. (A) Increases the reducing potential of the gas (B) Increases the flame temperature (C) No significant change occurs (D) Increases the hydrogen content in the metal

Description : In the blast furnace, incorporation of water vapour in the blast gives the following effect. (A) Increases the reducing potential of the gas (B) Increases the flame temperature (C) No significant change occurs (D) Increases the hydrogen content in the metal

Last Answer : (A) Increases the reducing potential of the gas

Blast furnace coke is made from coal by (A) Low temperature carbonisation (B) High temperature carbonisation (C) Medium temperature carbonisation (D) Heating the coal in an oven in presence of air

Description : Blast furnace coke is made from coal by (A) Low temperature carbonisation (B) High temperature carbonisation (C) Medium temperature carbonisation (D) Heating the coal in an oven in presence of air

Last Answer : (B) High temperature carbonisation

Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of red phosphorous is due to its polymeric structure (C) Red phosphorous is the most reactive allotropic form of phosphorous (D) Red phosphorous, which is used in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Description : Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of ... in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Last Answer : (C) Red phosphorous is the most reactive allotropic form of phosphorous

When assessing the older adult, the nurse anticipates increase in which of the follow components of respiratory status? a) Residual lung volume As a result, patient experience fatigue and breathlessness with sustained activity. b) Vital capacity The nurse anticipates decreased vital capacity. c) Gas exchange and diffusing capacity The nurse anticipates decreased gas exchange and diffusing capacity resulting in impaired healing of tissues due to decreased oxygenation. d) Cough efficiency The nurse anticipates difficulty coughing up secretions due to decreased cough efficiency.

Description : When assessing the older adult, the nurse anticipates increase in which of the follow components of respiratory status? a) Residual lung volume As a result, patient experience fatigue ... ) Cough efficiency The nurse anticipates difficulty coughing up secretions due to decreased cough efficiency.

Last Answer : a) Residual lung volume As a result, patient experience fatigue and breathlessness with sustained activity.

A 16-year-old boy suffers a mid-gut volvulus with massive loss of small intestine. Which of the following statement(s) is/are true concerning his nutritional requirements and management? a. If at least 18 inches of residual small intestine survives, the patient may tolerate some form of enteral nutrition b. A nutritional regimen consisting of supplemental glutamine, growth hormone, and a modified high carbohydrate, low fat diet may be beneficial in this patient c. The regimen described above may decrease the cost of care d. TPN needs will increase after discontinuation of growth hormone

Description : A 16-year-old boy suffers a mid-gut volvulus with massive loss of small intestine. Which of the following statement(s) is/are true concerning his nutritional requirements and management? a. If ... above may decrease the cost of care d. TPN needs will increase after discontinuation of growth hormone

Last Answer : Answer: a, b, c Prior to the availability of TPN, most patients developing short bowel syndrome from either surgery or catastrophic event died. In selected patients, however, with ... the growth hormone did not increase TPN needs in patients once they had undergone successful gut rehabilitation

Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000

Description : Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000

Last Answer : (B) 2000

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does not occur (C) Initiation of crack occurs on the surface of the machine part (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Description : Which of the following is not a characteristic observed in material failure by fatigue fracture? (A) Plastic deformation of material does not occur (B) Initiation of crack from below the surface does ... (D) Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface

Last Answer : Option B

Identify the false statement (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels (B) Pitting corrosion is usually very localised (C) Hydrogen embrittlement is facilitated by tensile stress (D) Stress corrosion cracking is facilitated by tensile stress

Description : Identify the false statement (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels (B) Pitting corrosion is usually very localised (C) Hydrogen embrittlement is facilitated by tensile stress (D) Stress corrosion cracking is facilitated by tensile stress

Last Answer : (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. (du/dy) n the value of 'n' for pseudoplastic and Dilatant fluid are < 1 and >1 respectively (C) Shear stress for Newtonian fluid is proportional to the rate of shear in the direction perpendicular to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature (C) Heat release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Main use of hard coke produced by high temperature carbonisation is in the (A) Iron blast furnace (B) Cupola in foundries (C) Sinter making (D) Domestic ovens

Description : Main use of hard coke produced by high temperature carbonisation is in the (A) Iron blast furnace (B) Cupola in foundries (C) Sinter making (D) Domestic ovens

Last Answer : (A) Iron blast furnace

Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Description : Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Last Answer : (B) Wrought iron cannot be easily forged and welded

Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Description : Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement(A) Cold rubber (SBR) is superior as compared to hot rubber (SBR)(B) Polymerisation temperature can modify the properties of SBR(C) Production of cold SBR employs lower pressure as compared to that ofhot SBR(D) None of these

Description : Pick out the wrong statement (A) Cold rubber (SBR) is superior as compared to hot rubber (SBR) (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) A pale color of petroleum product indicates lower viscosity (B) Color of petroleum products indicates the degree of refinement (C) Lighter petroleum distillates are lighter in color than the heavier residual oils (D) Fluorescence of oils helps to detect its adulteration

Description : Pick out the wrong statement. (A) A pale color of petroleum product indicates lower viscosity (B) Color of petroleum products indicates the degree of refinement (C) Lighter petroleum distillates are ... in color than the heavier residual oils (D) Fluorescence of oils helps to detect its adulteration

Last Answer : (A) A pale color of petroleum product indicates lower viscosity

The blast furnace gas is a byproduct in the production of pig iron in the blast furnace.  A. Yes  B. No

Description : The blast furnace gas is a byproduct in the production of pig iron in the blast furnace.  A. Yes  B. No

Last Answer : Answer: A

Pick out the wrong statement. (A) All the nitrogenous fertilisers are not soluble in water (B) A straight fertiliser contains only one nutrient (C) Calcium cyanamide is used as weed killer in onion fields (D) The phosphorous nutrient makes the plant stem stronger and increases its branches

Description : Pick out the wrong statement. (A) All the nitrogenous fertilisers are not soluble in water (B) A straight fertiliser contains only one nutrient (C) Calcium cyanamide is used as weed killer in onion fields (D) The phosphorous nutrient makes the plant stem stronger and increases its branches

Last Answer : (A) All the nitrogenous fertilisers are not soluble in water

Presence of high phosphorous in cast iron increases its (A) Fluidity (B) Melting point (C) Shrinkage (D) Tensile strength

Description : Presence of high phosphorous in cast iron increases its (A) Fluidity (B) Melting point (C) Shrinkage (D) Tensile strength

Last Answer : (A) Fluidity

Pick out the wrong statement. (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process (C) Lead susceptibility of petrol produced by catalytic process is more than that produced by thermal cracking (D) Operating pressure and temperature in thermal cracking process is more than that in catalytic cracking process

Description : Pick out the wrong statement. (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process (C) Lead susceptibility of ... Operating pressure and temperature in thermal cracking process is more than that in catalytic cracking process

Last Answer : (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8

Description : The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8

Last Answer : (C) 4

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

High ash containing coke (A) Produces more slag when used in the blast(B) Has poor strength and abrasion resistance(C) Is desirable in producer gas manufacture(D) None of these furnace

Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these

Last Answer : (A) Produces more slag when used in the blast furnace

Blast furnace gas is a very poisonous gas because of its predominantly high __________ content. (A) H2O (B) CO2 (C) CO (D) CH4

Description : Blast furnace gas is a very poisonous gas because of its predominantly high __________ content. (A) H2O (B) CO2 (C) CO (D) CH4

Last Answer : (C) CO

Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Last Answer : (C) Manufacture of carbon electrode

Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Last Answer : (B) Skip hoist

__________ atmosphere is maintained inside an iron blast furnace. (A) Oxidising (B) Reducing (C) Inert (D) Decarburising

Description : __________ atmosphere is maintained inside an iron blast furnace. (A) Oxidising (B) Reducing (C) Inert (D) Decarburising

Last Answer : (B) Reducing

__________ is used as a flux in the extraction of iron from iron ore (haematite) in blast furnace. (A) Bauxite (B) Limestone (C) Quartz (D) Manganese

Description : __________ is used as a flux in the extraction of iron from iron ore (haematite) in blast furnace. (A) Bauxite (B) Limestone (C) Quartz (D) Manganese

Last Answer : (B) Limestone

Which is the main reducing agent during production of iron from iron ore in a blast furnace? (A) C (B) CO (C) CO2 (D) H2

Description : Which is the main reducing agent during production of iron from iron ore in a blast furnace? (A) C (B) CO (C) CO2 (D) H2

Last Answer : (B) CO

The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore

Description : The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore

Last Answer : Limestone, coke & iron ore

Which of the following contributes maximum as main source of sulphur in the blast furnace charge? (A) Sinter (B) Coke (C) Iron ore (D) Limestone

Description : Which of the following contributes maximum as main source of sulphur in the blast furnace charge? (A) Sinter (B) Coke (C) Iron ore (D) Limestone

Last Answer : Coke

Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Description : Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Last Answer : (B) 3