Scaling of furnace stock is reduced by __________ in flue gas. (A) CO (B) H2 (C) High CO/CO2 (D) All (A), (B) & (C)

Scaling of furnace stock is reduced by __________ in flue gas.
(A) CO
(B) H2
(C) High CO/CO2
(D) All (A), (B) & (C)
by

1 Answer

Answer :

(D) All (A), (B) & (C)
by

Related questions

Incomplete combustion of fuel in the furnace is judged by high __________ of the flue gases. (A) CO content (B) Dew point (C) CO2 content (D) O2 content

Description : Incomplete combustion of fuel in the furnace is judged by high __________ of the flue gases. (A) CO content (B) Dew point (C) CO2 content (D) O2 content

Last Answer : (A) CO content

Blast furnace gas constitutes mainly of (A) N2 & CH4 (B) N2 & H2 (C) N2 & CO (D) CH4 & CO2

Description : Blast furnace gas constitutes mainly of (A) N2 & CH4 (B) N2 & H2 (C) N2 & CO (D) CH4 & CO2

Last Answer : (C) N2 & CO

In order to maintain an oxidising atmosphere in a furnace, it should have (A) More of excess air (B) Less of excess air (C) More of CO in flue gas (D) More of CO2 in flue gas

Description : In order to maintain an oxidising atmosphere in a furnace, it should have (A) More of excess air (B) Less of excess air (C) More of CO in flue gas (D) More of CO2 in flue gas

Last Answer : (A) More of excess air

Largest constituent of blast furnace gas is (A) N2 (B) CO (C) CO2 (D) H2

Description : Largest constituent of blast furnace gas is (A) N2 (B) CO (C) CO2 (D) H2

Last Answer : (A) N2

Advantages of fluidised bed combustion are (A) Reduced NOx formation in flue gas (B) Lower furnace operating temperature (C) High heat transfer rate (D) All (A), (B) & (C)

Description : Advantages of fluidised bed combustion are (A) Reduced NOx formation in flue gas (B) Lower furnace operating temperature (C) High heat transfer rate (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of (A) Use of non-preheated combustion air (B) Use of pulverised solid fuels (C) Imperfect mixing of fuel & air and infiltration of air (D) Use of excessive positive draft in the furnace

Description : In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of (A) Use of non-preheated combustion air (B) Use of pulverised solid ... of fuel & air and infiltration of air (D) Use of excessive positive draft in the furnace

Last Answer : (C) Imperfect mixing of fuel & air and infiltration of air

A carbonaceous fuel (containing no H2 or hydrocarbons) is burnt and the resulting flue gas contains 21% CO2 . It means that (A) 21% excess air has been used for combustion (B) 21% excess oxygen has been used for combustion (C) Complete combustion of fuel has taken place (D) No excess air has been used for combustion

Description : A carbonaceous fuel (containing no H2 or hydrocarbons) is burnt and the resulting flue gas contains 21% CO2 . It means that (A) 21% excess air has been used for combustion (B) 21% excess oxygen has ... (C) Complete combustion of fuel has taken place (D) No excess air has been used for combustion

Last Answer : (C) Complete combustion of fuel has taken place

Which is the main reducing agent during production of iron from iron ore in a blast furnace? (A) C (B) CO (C) CO2 (D) H2

Description : Which is the main reducing agent during production of iron from iron ore in a blast furnace? (A) C (B) CO (C) CO2 (D) H2

Last Answer : (B) CO

Flue gas obtained on complete combustion of pure acetylene (a hydrocarbon fuel) will contain (A) CO (B) CO2 (C) H2O (D) Both (B) & (C)

Description : Flue gas obtained on complete combustion of pure acetylene (a hydrocarbon fuel) will contain (A) CO (B) CO2 (C) H2O (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

In a furnace, the heat taken by the charge/stock and the heat lost to the furnace structure & flue gases depends on the (A) Rate of firing and emissivity of flame (B) Thermal conductivity of the charge & structural materials of furnace (C) Nature of process; whether batch, continuous or intermittent (D) All (A), (B) and (C)

Description : In a furnace, the heat taken by the charge/stock and the heat lost to the furnace structure & flue gases depends on the (A) Rate of firing and emissivity of flame (B) Thermal conductivity of the charge & ... (C) Nature of process; whether batch, continuous or intermittent (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Blast furnace gas is a very poisonous gas because of its predominantly high __________ content. (A) H2O (B) CO2 (C) CO (D) CH4

Description : Blast furnace gas is a very poisonous gas because of its predominantly high __________ content. (A) H2O (B) CO2 (C) CO (D) CH4

Last Answer : (C) CO

When incomplete combustion loss is high, the flue gas analysis shows large amount of (A) CO2 (B) CO (C) O2 (D) C

Description : When incomplete combustion loss is high, the flue gas analysis shows large amount of (A) CO2 (B) CO (C) O2 (D) C

Last Answer : (B) CO

Volumetric composition of flue gas analysed with the Orsat apparatus is : CO2 = 12%, O2 = 8%, CO = nil, N2 = 80%. This flue gas composition indicates that (A) Pure oxygen has been used for combustion (B) Nitrogen percentage in the fuel is very high (C) Excess air has been used for combustion (D) Hydrogen is not present in the fuel

Description : Volumetric composition of flue gas analysed with the Orsat apparatus is : CO2 = 12%, O2 = 8%, CO = nil, N2 = 80%. This flue gas composition indicates that (A) Pure oxygen has been used for combustion ... very high (C) Excess air has been used for combustion (D) Hydrogen is not present in the fuel

Last Answer : (C) Excess air has been used for combustion

Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Description : Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Last Answer : (A) Type of fuels viz. solid, liquid or gaseous

Which of the following variables affects the furnace capacity? (A) Temperature of flue gas (B) Thermal conductivity of stock (C) Thickness of heating stock(D) All (A), (B) and (C)

Description : Which of the following variables affects the furnace capacity? (A) Temperature of flue gas (B) Thermal conductivity of stock (C) Thickness of heating stock (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Coke oven gas consists mainly of (A) H2 & CH4 (B) CO & CO2 (C) H2 & CO (D) CH4 & CO

Description : Coke oven gas consists mainly of (A) H2 & CH4 (B) CO & CO2 (C) H2 & CO (D) CH4 & CO

Last Answer : (A) H2 & CH4

Coke oven gas constitutes mainly of (A) H2 & CO (B) H2 & CH4 (C) CH4 & CO (D) H2 & CO2

Description : Coke oven gas constitutes mainly of (A) H2 & CO (B) H2 & CH4 (C) CH4 & CO (D) H2 & CO2

Last Answer : (B) H2 & CH4

. Water gas constitutes mainly of (A) CO & H2 (B) CO & N2 (C) CO2 & H2 (D) CH4 & H2

Description : . Water gas constitutes mainly of (A) CO & H2 (B) CO & N2 (C) CO2 & H2 (D) CH4 & H2

Last Answer : (A) CO & H2

Producer gas comprises mainly of (A) CO & N2 (B) CO & H2 (C) CO2 & N2 (D) CO2 & H2

Description : Producer gas comprises mainly of (A) CO & N2 (B) CO & H2 (C) CO2 & N2 (D) CO2 & H2

Last Answer : (A) CO & N2

Main constituents of purified Lurgi gas are (A) H2 , CmHn & CO2 (B) CO, H2 & CH4 (C) CO2 , O2 & CO (D) N2 , H2 & CO2

Description : Main constituents of purified Lurgi gas are (A) H2 , CmHn & CO2 (B) CO, H2 & CH4 (C) CO2 , O2 & CO (D) N2 , H2 & CO2

Last Answer : (B) CO, H2 & CH4

L.D. converter gas (produced in steel plant) comprises mainly of (A) CO (upto 65%) & CO2 (B) CO2 & H2 (C) CO & O2 (D) CO2 & O2

Description : L.D. converter gas (produced in steel plant) comprises mainly of (A) CO (upto 65%) & CO2 (B) CO2 & H2 (C) CO & O2 (D) CO2 & O2

Last Answer : (A) CO (upto 65%) & CO2

Coke oven gas consists mainly of (A) H2 , & CH4 (B) CO, & CO2 (C) H2 , & CO (D) CH4 , & CO

Description : Coke oven gas consists mainly of (A) H2 , & CH4 (B) CO, & CO2 (C) H2 , & CO (D) CH4 , & CO

Last Answer : (A) H2 , & CH4

Synthesis gas' meant for the synthesis of organic compound is a variable mixture of (A) N2 & H2 (B) CO2 & H2 (C) CO & H2 (D) C & H2

Description : Synthesis gas' meant for the synthesis of organic compound is a variable mixture of (A) N2 & H2 (B) CO2 & H2 (C) CO & H2 (D) C & H2

Last Answer : (C) CO & H2

The rate of scaling of furnace stock depends upon the (A) Temperature (B) Time(C) Nature of atmosphere(D) All (A), (B) and (C)

Description : The rate of scaling of furnace stock depends upon the (A) Temperature (B) Time (C) Nature of atmosphere (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The sequence of absorption in flue gas analysis by Orsat's apparatus is respectively (A) CO2 , O2 , CO (B) CO, O2 , CO2 (C) CO2 , CO, O2

Description : The sequence of absorption in flue gas analysis by Orsat's apparatus is respectively (A) CO2 , O2 , CO (B) CO, O2 , CO2 (C) CO2 , CO, O2

Last Answer : (A) CO2 , O2 , CO

Protective gas used in the annealing furnace for steel coil comprises of (A) 95% N2 + 5% H2 (B) 5% H2 + 9% N2 (C) 100% CO (D) 100% H2

Description : Protective gas used in the annealing furnace for steel coil comprises of (A) 95% N2 + 5% H2 (B) 5% H2 + 9% N2 (C) 100% CO (D) 100% H2

Last Answer : (A) 95% N2 + 5% H2

Which of the following combustibles is absent in blast furnace gas?(A) H2 (B) CH4 (C) CO (D) None of these

Description : Which of the following combustibles is absent in blast furnace gas? (A) H2 (B) CH4 (C) CO (D) None of these

Last Answer : (B) CH4

To maximize the combustion efficiency, which of the following in the flue gas needs to be done? a) maximize O2 b) maximize CO2 c) minimize CO2 d) maximize CO

Description : To maximize the combustion efficiency, which of the following in the flue gas needs to be done? a) maximize O2 b) maximize CO2 c) minimize CO2 d) maximize CO

Last Answer : b) maximize CO2

Main constituent of the gas produced from a gobar gas plant is (A) CO2 (B) CH4 (C) H2 (D) CO

Description : Main constituent of the gas produced from a gobar gas plant is (A) CO2 (B) CH4 (C) H2 (D) CO

Last Answer : (B) CH4

The gas which contributes maximum to the heating value of natural gas is (A) CO (B) CO2 (C) H2 (D) CH4

Description : The gas which contributes maximum to the heating value of natural gas is (A) CO (B) CO2 (C) H2 (D) CH4

Last Answer : (D) CH4

The shift conversion reaction taking place during water gas manufacture is given by (A) C + H2O ↔ CO + H2 (B) C + 2H2O ↔ CO2 + 2H2 (C) CO + H2O ↔ CO2 + H2 (D) None of these

Description : The shift conversion reaction taking place during water gas manufacture is given by (A) C + H2O ↔ CO + H2 (B) C + 2H2O ↔ CO2 + 2H2 (C) CO + H2O ↔ CO2 + H2 (D) None of these

Last Answer : (C) CO + H2O ↔ CO2 + H2

The main type of sludge gas evolved during sewage treatment in Imhoff tank is (A) CO2 (B) CH4 (C) CO (D) H2

Description : The main type of sludge gas evolved during sewage treatment in Imhoff tank is (A) CO2 (B) CH4 (C) CO (D) H2

Last Answer : (B) CH4

Producer gas consists mainly of (A) CO, CO2 N2 , H2 (B) CO, H2 (C) H2 , CH4 (D) C2H2 , CO2 , H2

Description : Producer gas consists mainly of (A) CO, CO2 N2 , H2 (B) CO, H2 (C) H2 , CH4 (D) C2H2 , CO2 , H2

Last Answer : (A) CO, CO2 N2 , H2

Synthesis gas is a mixture of (A) CO and H2 (B) N2 and H2 (C) H2 , CH4 and CO (D) CO2 and H2

Description : Synthesis gas is a mixture of (A) CO and H2 (B) N2 and H2 (C) H2 , CH4 and CO (D) CO2 and H2

Last Answer : (A) CO and H2

Oxygen percentage in the flue gas coming out of a gaseous fuel fired furnace should be ideally about __________ percent. (A) < 2 (B) < 5 (C) < 8 (D) < 10

Description : Oxygen percentage in the flue gas coming out of a gaseous fuel fired furnace should be ideally about __________ percent. (A) < 2 (B) < 5 (C) < 8 (D) < 10

Last Answer : (A) < 2

Furnace aerodynamics is related to the __________ in the furnace. (A) Movement of gases (B) Measurement of flue gas volume (C) Temperature control

Description : Furnace aerodynamics is related to the __________ in the furnace. (A) Movement of gases (B) Measurement of flue gas volume (C) Temperature control

Last Answer : (A) Movement of gases

Flue gas outlet temperature from the chimney of any furnace should be ideally about __________ °C. (A) 50 (B) 100 (C) 150

Description : Flue gas outlet temperature from the chimney of any furnace should be ideally about __________ °C. (A) 50 (B) 100 (C) 150

Last Answer : (C) 150

Efficiency of the combustion of a fuel is judged by the __________ the flue gas. (A) % of CO2 in (B) % of O2 in (C) Temperature of (D) Colour of

Description : Efficiency of the combustion of a fuel is judged by the __________ the flue gas. (A) % of CO2 in (B) % of O2 in (C) Temperature of (D) Colour of

Last Answer : (B) % of O2 in

Forward reaction will be favoured for the exothermic reaction, represented by CO + H2O ⇌ CO2 + H2, by (A) Low temperature and high pressure (B) Low temperature and low pressure (C) High temperature and high pressure (D) High temperature and low pressure

Description : Forward reaction will be favoured for the exothermic reaction, represented by CO + H2O ⇌ CO2 + H2, by (A) Low temperature and high pressure (B) Low temperature and low pressure (C) High temperature and high pressure (D) High temperature and low pressure

Last Answer : (A) Low temperature and high pressure

Producer gas is a mixture of (a) CO and H2 (b) CO and N2 (c) CH4 and H2 (d) CO2 and H2

Description : Producer gas is a mixture of (a) CO and H2 (b) CO and N2 (c) CH4 and H2 (d) CO2 and H2

Last Answer : Ans:(a)

Water gas is the combination of – (1) CO and H2 (2) CO2 and H2 (3) CO and H2O (4) CO2 and CO

Description : Water gas is the combination of – (1) CO and H2 (2) CO2 and H2 (3) CO and H2O (4) CO2 and CO

Last Answer : (1) CO and H2 Explanation: Water has is a synthesis gas, containing carbon monoxide (CO) and hydrogen has (H2). It is made by passing steam over a redhot carbon fuel such as coke. The reaction between steam and hydrocarbons produce the has mixture.

Water gas is a mixture of (A) CO2 and O2 (B) O2 and H2 (C) H2, N2 and O2 (D) CO, N2 and H2.

Description : Water gas is a mixture of (A) CO2 and O2 (B) O2 and H2 (C) H2, N2 and O2 (D) CO, N2 and H2.

Last Answer : CO, N2 and H2.

A green house gas is a) H2 b) CO c) CO2 d) N2.

Description : A green house gas is a) H2 b) CO c) CO2 d) N2.

Last Answer : c) CO2

Blast furnace gas burns with a bluish flame, because of the presence of (A) CO (B) CH4 (C) CO2 (D) S

Description : Blast furnace gas burns with a bluish flame, because of the presence of (A) CO (B) CH4 (C) CO2 (D) S

Last Answer : (A) CO

The main drawback of supplying more excess air in the combustion of fuel is the (A) Excessive power requirement of air blower (B) Enhanced sensible heat loss in the flue gas (C) Intermittent and uncontrolled combustion of the fuel (D) High exit flue gas temperature from the furnace

Description : The main drawback of supplying more excess air in the combustion of fuel is the (A) Excessive power requirement of air blower (B) Enhanced sensible heat loss in the flue gas (C) Intermittent and uncontrolled combustion of the fuel (D) High exit flue gas temperature from the furnace

Last Answer : (B) Enhanced sensible heat loss in the flue gas

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

Calorific value of gobar gas (containing CH4 = 60% , H2 = 10% ; CO2 = 30%) may be about __________ Kcal/Nm3 . (A) 1,800 (B) 3,200 (C) 5,400 (D) 10,200

Description : Calorific value of gobar gas (containing CH4 = 60% , H2 = 10% ; CO2 = 30%) may be about __________ Kcal/Nm3 . (A) 1,800 (B) 3,200 (C) 5,400 (D) 10,200

Last Answer : (C) 5,400

__________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2(C) CO2(D) He

Description : __________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2 (C) CO2 (D) He

Last Answer : (A) N2

Which of the following is the most reactive (as regards the formation of CO + H2 from C + H2O)? (A) Blast furnace coke (B) Low temperature coke (C) Anthracite coal (D) Sub-bituminous coa

Description : Which of the following is the most reactive (as regards the formation of CO + H2 from C + H2O)? (A) Blast furnace coke (B) Low temperature coke (C) Anthracite coal (D) Sub-bituminous coa

Last Answer : (B) Low temperature coke