Which of the following is not a disadvantage of wireless LAN? A. Slower data transmission B. higher error rate C. interference of transmissions from different computers D. All of theabove

Which of the following is not a disadvantage of wireless LAN?
A.
Slower data transmission
B.
higher error rate
C.
interference of transmissions from different computers
D.
All of theabove
by

1 Answer

Answer :

All of theabove
by

Related questions

Devices interconnected by the LAN should include A. Computers and terminals B. mass storage device, printers and plotters C. bridges and gateways D. All of theabove E. None of the above

Description : Devices interconnected by the LAN should include A. Computers and terminals B. mass storage device, printers and plotters C. bridges and gateways D. All of theabove E. None of the above

Last Answer : All of theabove

Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame. C. One of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame

Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame C. one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size

IEEE hasdefined the specifications fora wireless LAN, called _______, whichcovers the physical and data link layers. A) IEEE 802.3 B) IEEE 802.5 C) IEEE 802.11 D) IEEE 802.2

Description : IEEE hasdefined the specifications fora wireless LAN, called _______, whichcovers the physical and data link layers. A) IEEE 802.3 B) IEEE 802.5 C) IEEE 802.11 D) IEEE 802.2

Last Answer : IEEE 802.11

The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine and the InternetProtocol Software on another C. reports error conditions tothe original source, the source must relate errors to individual applicationprograms and takeaction to correct theproblem D. All of theabove E. None of the above

Description : The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine ... and takeaction to correct theproblem D. All of theabove E. None of the above

Last Answer : All of theabove

Compared to analog signals, digital signals A. allow faster transmission B. are moreaccurate C. both (a)and (b) D. All of theabove E. None of the above

Description : Compared to analog signals, digital signals A. allow faster transmission B. are moreaccurate C. both (a)and (b) D. All of theabove E. None of the above

Last Answer : both (a)and (b)

Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for multiple access transmission media C. a form of TDMA in which circuit switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Description : Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for ... switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Last Answer : a form of TDMA in which circuit switching is used to dynamically changethechannel assignments

A central computer surrounded by one or more satellite computers is called a A. bus network B. ring network C. star network D. All of theabove E. None of the above

Description : A central computer surrounded by one or more satellite computers is called a A. bus network B. ring network C. star network D. All of theabove E. None of the above

Last Answer : star network

Which one of the following event is not possible in wireless LAN? a) collision detection b) acknowledgement of data frames c) multi-mode data transmission d) connection to wired networks

Description : Which one of the following event is not possible in wireless LAN? a) collision detection b) acknowledgement of data frames c) multi-mode data transmission d) connection to wired networks

Last Answer : a) collision detection

_____ are used for cellular phone, satellite,and wireless LAN communications. A) Radio waves B) Microwaves C) Infrared waves D) none of the above

Description : _____ are used for cellular phone, satellite,and wireless LAN communications. A) Radio waves B) Microwaves C) Infrared waves D) none of the above

Last Answer : Microwaves

Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocolc. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Description : Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocol c. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Last Answer : CSMA/CD is not suitable for a high propagation delay

A wireless fidelity is a form of wireless _____ network. A. LAN B. MAN C. WAN D. None

Description : A wireless fidelity is a form of wireless _____ network. A. LAN B. MAN C. WAN D. None

Last Answer : A. LAN

Which of this is not a guided media? a) Fiber optical cable b) Coaxial cable c) Wireless LAN d) Copper wire

Description : Which of this is not a guided media? a) Fiber optical cable b) Coaxial cable c) Wireless LAN d) Copper wire

Last Answer : c) Wireless LAN

……………are used for cellular phone, satellite, and wireless LAN communications.a. Microwaves b. Radio waves c. None of these d. Infrared waves

Description : ……………are used for cellular phone, satellite, and wireless LAN communications. a. Microwaves b. Radio waves c. None of these d. Infrared waves

Last Answer : a. Microwaves

In cellular system, _____ defines the geographic distance that is required between cells using identical frequencies in order to avoid interference between the radio transmissions at these cells. A. frequency-reuse ratio B. distance-to-reuse ratio (D/R) C. reuse format plan ratio D. reuse factor

Description : In cellular system, _____ defines the geographic distance that is required between cells using identical frequencies in order to avoid interference between the radio transmissions at these cells. A. frequency-reuse ratio B. distance-to-reuse ratio (D/R) C. reuse format plan ratio D. reuse factor

Last Answer : B. distance-to-reuse ratio (D/R)

Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s.b. 2 c. 2.5 d. 5

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

The types of Unguided transmission channel or media used for LAN are __. A. Twisted Pair Cables B. Coaxial Cables C. Radio Waves D. All the above

Description : The types of Unguided transmission channel or media used for LAN are __. A. Twisted Pair Cables B. Coaxial Cables C. Radio Waves D. All the above

Last Answer : C. Radio Waves

Which of the following network is used to connect a number of computers to each other by cables in a single location? A. WAN B. LAN C. MAN D. both b and c

Description : Which of the following network is used to connect a number of computers to each other by cables in a single location? A. WAN B. LAN C. MAN D. both b and c

Last Answer : B. LAN

Which of the following network is used to connect a number of computers to eachother by cables in a single location? a. LAN b. Internet c. WAN d. MAN

Description : Which of the following network is used to connect a number of computers to eachother by cables in a single location? a. LAN b. Internet c. WAN d. MAN

Last Answer : a. LAN

A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Description : A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Last Answer : physical

In SQL, the CREATE TABLESPACE isused A. to createa place in the databasefor storageof scheme objects, rollback segments, andnaming the data files to comprise the tablespace B. to createa database trigger C. to add/rename data files, to change storage D. All of theabove E. None of the above

Description : In SQL, the CREATE TABLESPACE isused A. to createa place in the databasefor storageof scheme objects, rollback segments, andnaming the data files to comprise the tablespace B. to createa database trigger C. to add/rename data files, to change storage D. All of theabove E. None of the above

Last Answer : to createa place in the databasefor storageof scheme objects, rollback segments, andnaming the data files to comprise the tablespace

A logical schema A. is the entire database B. is a standard wayof organizing information into accessible parts C. describes how data is actually stored on disk D. All of theabove E. None of the above

Description : A logical schema A. is the entire database B. is a standard wayof organizing information into accessible parts C. describes how data is actually stored on disk D. All of theabove E. None of the above

Last Answer : is a standard wayof organizing information into accessible parts

Data encryption techniquesare particularly useful for A. reducingstorage space requirements B. improving data integrity C. protecting data indata communication systems D. All of theabove E. None of the above

Description : Data encryption techniquesare particularly useful for A. reducingstorage space requirements B. improving data integrity C. protecting data indata communication systems D. All of theabove E. None of the above

Last Answer : protecting data indata communication systems

Goals for the design of thelogical schema include A. avoiding data inconsistency B. being ableto construct queries easily C. being ableto access data efficiently D. All of theabove E. None of the above

Description : Goals for the design of thelogical schema include A. avoiding data inconsistency B. being ableto construct queries easily C. being ableto access data efficiently D. All of theabove E. None of the above

Last Answer : All of theabove

Data integrity control A. is used to set upper and lower limits on numeric data B. requires the use of passwords toprohibit unauthorized access tothe file C. has the data dictionary keep thedate and time of lastaccess last back-up,and most recent modificationfor all files D. All of theabove E. None of the above

Description : Data integrity control A. is used to set upper and lower limits on numeric data B. requires the use of passwords toprohibit unauthorized access tothe file C. has the data dictionary keep thedate and time ... back-up,and most recent modificationfor all files D. All of theabove E. None of the above

Last Answer : has the data dictionary keep thedate and time of lastaccess last back-up,and most recent modificationfor all files

Data flow between two devices canoccur in a _______ way. A) simplex B) half-duplex C) full-duplex D) all of theabove

Description : Data flow between two devices canoccur in a _______ way. A) simplex B) half-duplex C) full-duplex D) all of theabove

Last Answer : all of theabove

_____ refers tothe structure or format of the data, meaning the order in which they are presented. A) Semantics B) Syntax C) Timing D) All of theabove

Description : _____ refers tothe structure or format of the data, meaning the order in which they are presented. A) Semantics B) Syntax C) Timing D) All of theabove

Last Answer : Syntax

Data aresent over pin _____ of the EIA-232 interface. A. 2 B. 3 C. 4 D. All of theabove

Description : Data aresent over pin _____ of the EIA-232 interface. A. 2 B. 3 C. 4 D. All of theabove

Last Answer : 2

In SQL, which commandis used to select only onecopy of each setof duplicablerows A. SELECT DISTINCT B. SELECT UNIQUE C. SELECT DIFFERENT D. All of theabove E. None of the above

Description : In SQL, which commandis used to select only onecopy of each setof duplicablerows A. SELECT DISTINCT B. SELECT UNIQUE C. SELECT DIFFERENT D. All of theabove E. None of the above

Last Answer : SELECT DISTINCT

Database management systems are intended to: A. eliminatedata redundancy B. establishrelationships among records in different files C. manage file access D. maintaindata integrity E. All of theabove

Description : Database management systems are intended to: A. eliminatedata redundancy B. establishrelationships among records in different files C. manage file access D. maintaindata integrity E. All of theabove

Last Answer : All of theabove

Subschema can be used to A. create very different, personalized views of the samedata B. present information in different formats C. hide sensitive informationby omitting fields from thesub¬schema's description D. All of theabove E. None of the above

Description : Subschema can be used to A. create very different, personalized views of the samedata B. present information in different formats C. hide sensitive informationby omitting fields from thesub¬schema's description D. All of theabove E. None of the above

Last Answer : All of theabove

A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Description : A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Last Answer : multiplexer

In ATM, the _______layeraccepts transmissions from upper-layer servicesand maps them into ATM cells. A) physical B) ATM C) AAL D) none of the above

Description : In ATM, the _______layeraccepts transmissions from upper-layer servicesand maps them into ATM cells. A) physical B) ATM C) AAL D) none of the above

Last Answer : AAL

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

Consider a link with packet loss probability of 0.2. What is the expected number of transmissions it would take to transfer 200 packets given that the stop and wait protocol is used? a. 125 b. 250 c. 225

Description : Consider a link with packet loss probability of 0.2. What is the expected number of transmissions it would take to transfer 200 packets given that the stop and wait protocol is used? a. 125 b. 250 c. 225

Last Answer : b. 250

_________control inthe datalink layer is based on automatic repeat request, which is the retransmission of data. A) Flow B) Error C) Transmission D) none of the above

Description : _________control inthe datalink layer is based on automatic repeat request, which is the retransmission of data. A) Flow B) Error C) Transmission D) none of the above

Last Answer : Transmission

When 2 or more bits in a data unit has been changed during the transmission, the error is called _____ a. random error b. burst error c. inverted error d. double error

Description : When 2 or more bits in a data unit has been changed during the transmission, the error is called _____ a. random error b. burst error c. inverted error d. double error

Last Answer : b. burst error

When 2 or more bits in a data unit has been changed during the transmission, the error is called ____________ A. random error B. burst error C. inverted error D. double error

Description : When 2 or more bits in a data unit has been changed during the transmission, the error is called ____________ A. random error B. burst error C. inverted error D. double error

Last Answer : B. burst error

Compare LAN, WAN and MAN on the basis of following point: 1) Geographical area covered 2) Communication Medium used 3) Rate of data transmission 4) Example / Application

Description : Compare LAN, WAN and MAN on the basis of following point: 1) Geographical area covered 2) Communication Medium used 3) Rate of data transmission 4) Example / Application

Last Answer : Comparison LAN WAN MAN Geographical area covered Covers small geographical area.(up to 1km.)  Covers large locality and connects countries together. ( Area above 100km) Covers ... School, Hospital. Internet/ Country, Continent. Cable TV network / Small towns, City.

Why is the physical length of a coaxial cable transmission line shorter than its electrical length?A. Skin effect is less pronounced in the coaxial cable B. RF energy moves slower along the coaxial cable C. The surge impedance is higher in the parallel feed line D. The characteristic impedance is higher in the parallel feed line

Description : Why is the physical length of a coaxial cable transmission line shorter than its electrical length? A. Skin effect is less pronounced in the coaxial cable B. RF energy moves slower along the ... higher in the parallel feed line D. The characteristic impedance is higher in the parallel feed line

Last Answer : B. RF energy moves slower along the coaxial cable

A _______is a data communicationsystem withina building, plant,or campus, orbetween nearby buildings. A) MAN B) LAN C) WAN D) none of the above

Description : A _______is a data communicationsystem withina building, plant,or campus, orbetween nearby buildings. A) MAN B) LAN C) WAN D) none of the above

Last Answer : LAN

Data communication system within a building or campus is________ a) LAN b) WAN c) MAN d) PAN

Description : Data communication system within a building or campus is________ a) LAN b) WAN c) MAN d) PAN

Last Answer : a) LAN

Data communication system spanning states, countries, or the whole world is ________ a) LAN b) WAN c) MAN d) PAN

Description : Data communication system spanning states, countries, or the whole world is ________ a) LAN b) WAN c) MAN d) PAN

Last Answer : b) WAN

If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Description : If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : unicast

f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Description : f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : multicast

Membership in a VLAN can be based on _________. A) port numbers B) MAC addresses C) IP addresses D) all of theabove

Description : Membership in a VLAN can be based on _________. A) port numbers B) MAC addresses C) IP addresses D) all of theabove

Last Answer : all of theabove

In Go-Back-N ARQ, if frames 4,5, and 6 are received successfully, thereceiver may send an ACK _______ to thesender. A) 5 B) 6 C) 7 D) any of theabove

Description : In Go-Back-N ARQ, if frames 4,5, and 6 are received successfully, thereceiver may send an ACK _______ to thesender. A) 5 B) 6 C) 7 D) any of theabove

Last Answer : 7

In______ schemes, the voltagesare on the both sidesof the time axis. Forexample, thevoltage level for 0 can bepositive and thevoltage level for 1 can be negative. A) polar B) bipolar C) unipolar D) all of theabove

Description : In______ schemes, the voltagesare on the both sidesof the time axis. Forexample, thevoltage level for 0 can bepositive and thevoltage level for 1 can be negative. A) polar B) bipolar C) unipolar D) all of theabove

Last Answer : polar

Ina _____scheme,all the signal levels are onone sideof the time axis,either above or below. A) polar B) bipolar C) unipolar D) all of theabove

Description : Ina _____scheme,all the signal levels are onone sideof the time axis,either above or below. A) polar B) bipolar C) unipolar D) all of theabove

Last Answer : unipolar