In cellular system, _____ defines the geographic distance that is required between cells using identical frequencies in order to avoid interference between the radio transmissions at these cells. A. frequency-reuse ratio B. distance-to-reuse ratio (D/R) C. reuse format plan ratio D. reuse factor

In cellular system, _____ defines the geographic distance that is required between cells using
identical frequencies in order to avoid interference between the radio transmissions at these cells.
A. frequency-reuse ratio
B. distance-to-reuse ratio (D/R)
C. reuse format plan ratio
D. reuse factor
by

1 Answer

Answer :

B. distance-to-reuse ratio (D/R)
by

Related questions

How can multiple earth stations share a satellite on the same frequencies? A. Frequency reuse B. Multiplexing C. Mixing D. Frequency hopping

Description : How can multiple earth stations share a satellite on the same frequencies? A. Frequency reuse B. Multiplexing C. Mixing D. Frequency hopping

Last Answer : A. Frequency reuse

Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Description : Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Last Answer : C. Out of the band

Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Description : Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Last Answer : C. Two or more antennas operating on the same frequency

In a typical mobile phone system with hexagonal cells, it is forbidden to reuse a frequency band in adjacent cells. If 840 frequencies are available, how many can be used in a given cell? (A) 280 (B) 210 (C) 140 (D) 120

Description : In a typical mobile phone system with hexagonal cells, it is forbidden to reuse a frequency band in adjacent cells. If 840 frequencies are available, how many can be used in a given cell? (A) 280 (B) 210 (C) 140 (D) 120

Last Answer : Answer: A Explanation: Each cell has six other adjacent cells, in a hexagonal grid. If the central cell uses frequency group A, its six adjacent cells can use B, C, B, C, B, and C respectively. In other words, only 3 unique cells are needed. So the answer is 840/3 = 280 frequencies.

Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Description : Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Last Answer : B. 156.8 MHz

The band of frequencies least susceptible to atmospheric noise and interference is: A. 30 – 300 kHz B. 300 – 3000 kHz C. 3 – 30 MHz D. 300 – 3000 MHz

Description : The band of frequencies least susceptible to atmospheric noise and interference is: A. 30 – 300 kHz B. 300 – 3000 kHz C. 3 – 30 MHz D. 300 – 3000 MHz

Last Answer : D. 300 – 3000 MHz

Space diversity transmission means transmitting and receiving on A. two or more antennas operating on two different frequencies B. two or more identical frequencies C. two or more different frequencies D. two or more antennas operating on the same frequencies

Description : Space diversity transmission means transmitting and receiving on A. two or more antennas operating on two different frequencies B. two or more identical frequencies C. two or more different frequencies D. two or more antennas operating on the same frequencies

Last Answer : D. two or more antennas operating on the same frequencies

nif stands for A. Non-intrinsic figure B. Noise improvement factor C. Narrow intermediate frequency D. Noise interference figure

Description : nif stands for A. Non-intrinsic figure B. Noise improvement factor C. Narrow intermediate frequency D. Noise interference figure

Last Answer : B. Noise improvement factor

Nif stands for A. Narrow intermediate frequency B. Noise interference figure C. Noise improvement factor D. Non-intrinsic fugure

Description : Nif stands for A. Narrow intermediate frequency B. Noise interference figure C. Noise improvement factor D. Non-intrinsic fugure

Last Answer : C. Noise improvement factor

The ratio of frequencies is termed. A. interval B. octave C. harmonics D. factor

Description : The ratio of frequencies is termed. A. interval B. octave C. harmonics D. factor

Last Answer : A. interval

Which frequency reuse method is less effective because of Faraday’s effect? A. Dual polarization B. Reducing antenna beamwidth C. Zonal rotation D. Spin stabilization

Description : Which frequency reuse method is less effective because of Faraday’s effect? A. Dual polarization B. Reducing antenna beamwidth C. Zonal rotation D. Spin stabilization

Last Answer : A. Dual polarization

A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Description : A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Last Answer : D. Both A and C above

How does spatial isolation technique in satellite communications avoid interference? A. Use of different polarity antennas B. Use of different types of antennas C. Employment of highly directional spot-beam antennas D. Use of low gain antennas

Description : How does spatial isolation technique in satellite communications avoid interference? A. Use of different polarity antennas B. Use of different types of antennas C. Employment of highly directional spot-beam antennas D. Use of low gain antennas

Last Answer : C. Employment of highly directional spot-beam antennas

What device measures the angle between two radio frequencies and also the direction of propagation of a wave? A. Densimeter B. Absorption wavemeter C. Goniometer D. Ergometer

Description : What device measures the angle between two radio frequencies and also the direction of propagation of a wave? A. Densimeter B. Absorption wavemeter C. Goniometer D. Ergometer

Last Answer : C. Goniometer

Frequencies above ______ kHz, are referred to as the radio frequencies. A. 20 B. 2 C. 10 D. 200

Description : Frequencies above ______ kHz, are referred to as the radio frequencies. A. 20 B. 2 C. 10 D. 200

Last Answer : A. 20

Which of the following is not a disadvantage of wireless LAN? A. Slower data transmission B. higher error rate C. interference of transmissions from different computers D. All of theabove

Description : Which of the following is not a disadvantage of wireless LAN? A. Slower data transmission B. higher error rate C. interference of transmissions from different computers D. All of theabove

Last Answer : All of theabove

What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Description : What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Last Answer : A. Interference to adjacent channel

One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used

Description : One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used

Last Answer : A. noise is amplified with voice when an FDM system is used

What mathematical plane figure is ideal in cellular system design and engineering it graphically and functionally depicts overlapping radio coverage between and among adjacent cell base stations? A. Hexagon B. Octagon C. Pentagon D. Nonagon

Description : What mathematical plane figure is ideal in cellular system design and engineering it graphically and functionally depicts overlapping radio coverage between and among adjacent cell base stations? A. Hexagon B. Octagon C. Pentagon D. Nonagon

Last Answer : A. Hexagon

A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 km. determine the optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Description : A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 ... optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Last Answer : C. 5.4 MHz

What is the delay time for satellite transmissions from earth transmitter to earth receiver? A. 0.5 s B. 1s C. 5 ms D. 0.25 s

Description : What is the delay time for satellite transmissions from earth transmitter to earth receiver? A. 0.5 s B. 1s C. 5 ms D. 0.25 s

Last Answer : A. 0.5 s

What is the method of diversity reception where the signal is transmitted on 2 different frequencies over the same path? A. Quadruple B. Frequency C. Polarization D. Space

Description : What is the method of diversity reception where the signal is transmitted on 2 different frequencies over the same path? A. Quadruple B. Frequency C. Polarization D. Space

Last Answer : B. Frequency

What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Description : What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice ... a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Last Answer : C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz

An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Description : An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Last Answer : D. 99.7 MHz

A superhet receiver has an IF of 455 kHz and is experiencing image-channel interference on a frequency of 1570 kHz. The receiver is tuned to A. 1115 kHz B. 660 kHz C. 2025 kHz D. 910 kHz

Description : A superhet receiver has an IF of 455 kHz and is experiencing image-channel interference on a frequency of 1570 kHz. The receiver is tuned to A. 1115 kHz B. 660 kHz C. 2025 kHz D. 910 kHz

Last Answer : B. 660 kHz

In the event of an act of unlawful interference, which of the following is the correct procedure to be taken by the pilot in command? a. Squawk 7700 if the situation requires and continue the flight as per the ATC clearance received if possible b. Squawk 7500 and broadcast a warning to ATC other traffic on 121.500MHz or the frequency in use whilst maintaining the flight as cleared c. Squawk 7500 (or 7700 if required) and broadcast a warning if the situation forces deviation from the cleared flight plan d. If forced to deviate from the flight plan, climb or descend to altitudes that differ from the normal cruising altitudes by 1000ft

Description : In the event of an act of unlawful interference, which of the following is the correct procedure to be taken by the pilot in command? a. Squawk 7700 if the situation requires and continue ... the flight plan, climb or descend to altitudes that differ from the normal cruising altitudes by 1000ft

Last Answer : c. Squawk 7500 (or 7700 if required) and broadcast a warning if the situation forces deviation from the cleared flight plan

The modulation technique used by GSM cellular system A. Phase shift keying B. Frequency shift keying C. Gaussian minimum shift keying D. QAM

Description : The modulation technique used by GSM cellular system A. Phase shift keying B. Frequency shift keying C. Gaussian minimum shift keying D. QAM

Last Answer : C. Gaussian minimum shift keying

A law that specifically requires the service of a duly registered electronics and communications engineer in the designing installation and construction, operation and maintenance of radio stations. A. Act 3846 B. LOl 1000 C. R.A. 5734 D. Dept. order 88

Description : A law that specifically requires the service of a duly registered electronics and communications engineer in the designing installation and construction, operation and maintenance of radio stations. A. Act 3846 B. LOl 1000 C. R.A. 5734 D. Dept. order 88

Last Answer : D. Dept. order 88

What causes image interference? A. Low gain B. High IF C. Poor front-end selectivity D. Low signal-to-noise ratio

Description : What causes image interference? A. Low gain B. High IF C. Poor front-end selectivity D. Low signal-to-noise ratio

Last Answer : C. Poor front-end selectivity

An invitation from the primary to a secondary to transmit a message. A. Retransmission B. Selection C. Reuse D. Polling

Description : An invitation from the primary to a secondary to transmit a message. A. Retransmission B. Selection C. Reuse D. Polling

Last Answer : D. Polling

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

Three identical circuits having 10 dB signal noise-to-noise ratio each are connected in tandem with each other, what is the overall S/N? A. 5.23 dB B. 14.77dB C. 30 dB D. 40 dB

Description : Three identical circuits having 10 dB signal noise-to-noise ratio each are connected in tandem with each other, what is the overall S/N? A. 5.23 dB B. 14.77dB C. 30 dB D. 40 dB

Last Answer : A. 5.23 dB

A disadvantage of using a trap antenna. A. It will radiate harmonics B. It can only be used for single-bad operation C. It is too sharply directional at lower frequencies D. It must be neutralized

Description : A disadvantage of using a trap antenna. A. It will radiate harmonics B. It can only be used for single-bad operation C. It is too sharply directional at lower frequencies D. It must be neutralized

Last Answer : A. It will radiate harmonics

Is it against FCC regulations to speak Spanish over 2-way radio transmissions?

Description : Is it against FCC regulations to speak Spanish over 2-way radio transmissions?

Last Answer : No, of course not.

How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator or ferrite isolator in the feed line of the transmitter and duplexer C. By using a class C final amplifier with high driving power D. By installing a low-pass filter in the antenna feed line

Description : How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator ... high driving power D. By installing a low-pass filter in the antenna feed line

Last Answer : A. Through installing a band-pass filter in the antenna feed line

If a power cable and a communication cable are to run parallel the minimum distance between the two, to avoid interference, should be (a) 2 cm (b) 10 cm (c) 50 cm (d) 400 cm

Description : If a power cable and a communication cable are to run parallel the minimum distance between the two, to avoid interference, should be (a) 2 cm (b) 10 cm (c) 50 cm (d) 400 cm

Last Answer : (c) 50 cm

How to maximize the skip distance? A. Using the smallest possible radiation angle and highest possible frequency B. Using the smallest possible radiation angle and lowest possible frequency C. Using the biggest possible radiation angle and highest possible frequency D. Using the biggest possible radiation angle and lowest possible frequency

Description : How to maximize the skip distance? A. Using the smallest possible radiation angle and highest possible frequency B. Using the smallest possible radiation angle and lowest possible frequency ... highest possible frequency D. Using the biggest possible radiation angle and lowest possible frequency

Last Answer : A. Using the smallest possible radiation angle and highest possible frequency

Skip distance can be maximized by using the ____ radiation angle possible and the ____ frequency that will be refracted at that angle. A. lowest, lowest B. lowest, highest C. highest, lowest D. highest, highest

Description : Skip distance can be maximized by using the ____ radiation angle possible and the ____ frequency that will be refracted at that angle. A. lowest, lowest B. lowest, highest C. highest, lowest D. highest, highest

Last Answer : B. lowest, highest

The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞(B) 0 (C) 1 (D) > 1

Description : The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞ (B) 0 (C) 1 (D) > 1

Last Answer : (C) 1

The device that converts digital signals to analog signals at the start of long distance transmissions is (1) peripheral (2) modem (3) telephone (4) antenna

Description : The device that converts digital signals to analog signals at the start of long distance transmissions is (1) peripheral (2) modem (3) telephone (4) antenna

Last Answer : modem

One of the following is not among the major components required on board ship under the global maritime distress and safety system. A. On board radio facilities B. Radio operator telegraphy onboard C. Shore base facilities D. Radio personnel on board

Description : One of the following is not among the major components required on board ship under the global maritime distress and safety system. A. On board radio facilities B. Radio operator telegraphy onboard C. Shore base facilities D. Radio personnel on board

Last Answer : B. Radio operator telegraphy onboard

The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Description : The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Last Answer : c. Normal ATC is resumed after an emergency

The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Description : The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Last Answer : c. Normal ATC is resumed after an emergency

For a space wave transmission, the radio horizon distance of a receiving antenna with a height of 64 meters is approximately A. 8 km B. 32 km C. 64 km D. 256 km

Description : For a space wave transmission, the radio horizon distance of a receiving antenna with a height of 64 meters is approximately A. 8 km B. 32 km C. 64 km D. 256 km

Last Answer : B. 32 km

What phenomenon causes the radio-path horizon distance to exceed the geometric horizon? A. Diffraction B. Ducting C. Reflection D. Refraction

Description : What phenomenon causes the radio-path horizon distance to exceed the geometric horizon? A. Diffraction B. Ducting C. Reflection D. Refraction

Last Answer : D. Refraction

For a space wave transmission, the radio horizon distance of a transmitting antenna with a height of 100 meters is approximately:A. 10 km B. 40 km C. 100 km D. 400 km

Description : For a space wave transmission, the radio horizon distance of a transmitting antenna with a height of 100 meters is approximately: A. 10 km B. 40 km C. 100 km D. 400 km

Last Answer : B. 40 km

What phenomenon causes the radio-path horizon distance to exceed the geometric horizon? A. E-layer skip. B. D-layer skip. C. Auroral skip. D. Radio waves may be bent.

Description : What phenomenon causes the radio-path horizon distance to exceed the geometric horizon? A. E-layer skip. B. D-layer skip. C. Auroral skip. D. Radio waves may be bent.

Last Answer : D. Radio waves may be bent.

RADAR means A. Radio detection and rating B. Radio detection and ranging C. Radio distance and ranging D. Radio delay and ranging

Description : RADAR means A. Radio detection and rating B. Radio detection and ranging C. Radio distance and ranging D. Radio delay and ranging

Last Answer : B. Radio detection and ranging

_________ is the random and unpredictable electric signals from natural causes, both internal and external to the system. A. Interference B. Attenuation C. Distortion D. Noise

Description : _________ is the random and unpredictable electric signals from natural causes, both internal and external to the system. A. Interference B. Attenuation C. Distortion D. Noise

Last Answer : D. Noise