Description : ________ can beachievedbyusing multiplexing; ______ canbe achieved by using spreading. A) Efficiency; privacy and antijamming B) Privacyand antijamming;efficiency C) Privacyand efficiency; antijamming D) Efficiency and antijamming; privacy
Last Answer : Efficiency; privacy and antijammin
Description : The moderntelephone network isnow ________. A) digital B) analog C) digital as well as analog D) none of the above
Last Answer : digital as well as analog
Description : AM and FM are examplesof ________ conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digita
Last Answer : analog-to-analog
Description : Which of the following canbe used to select the entire document ? (A) CTRL+A (B) ALT+F5 (C) SHIFT+A (D) CTRL+K (E) CTRL+H
Last Answer : CTRL+A
Description : A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame
Last Answer : 10,000 B frame
Description : Data from a computer are_______; the local loop handles _______ signals. A) analog; analog B) analog; digital C) digital; digital D) digital; analog
Last Answer : digital; analog
Description : _______ data have discretestates and take discrete values. A) Analog B) Digital C) (a) or (b) D) None of the above
Last Answer : Digital
Description : _____ data are continuousand take continuous values. A) analog B) digital C) (a) or (b) D) none of the above
Last Answer : analog
Description : Demodulation is aprocessof A. converting analog to digital signals B. converting digital to analogsignals C. multiplexing various signals intoone high speed line signals D. performing data description
Last Answer : converting analog to digital signals
Description : Signals can be ________. A) analog B) digital C) either (a)or (b) D) neither (a) nor (b)
Last Answer : either (a)or (b)
Description : A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above
Last Answer : Resembles both a digital and analog computer
Description : In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above
Last Answer : All of above
Description : A digital computer did not score over an analog computer in terms of a. Speed b. Accuracy c. Cost d. Memory
Last Answer : Accuracy
Description : The computer that process both analog and digital is called a. Analog computer b. Digital computer c. Hybrid computer d. Mainframe computer
Last Answer : Hybrid computer
Description : An example of digital, rather than analog, communication is a. DDD b. DDS c. WATS d. DDT
Last Answer : DDS
Description : In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve
Last Answer : equilizer
Description : The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as: a. modulation b. demodulation c. synchronizing d. digitising
Last Answer : digitising
Description : The original telephone network, which is referred to as the plainold telephone system (POTS), was an ________system. A) digital B) analog C) digital as well as analog D) none of the above
Description : FSM isan _________technique. A) analog B) digital C) either (a)or (b) D) none of the above
Description : ________conversion is therepresentation ofanalog information by an analog signal. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digita
Last Answer : Analog-to-analog
Description : _______ conversionis the process of changing one of the characteristics ofan analog signal basedon the informationin the digitaldata. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digital
Last Answer : Digital-to-analog
Description : ASK, PSK, FSK,and QAM are examples of________conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital
Last Answer : digital-to-analog
Description : __________ conversion involves three techniques: line coding,block coding, and scrambling. A) Analog-to-digital B) Digital-to-analog C) Analog-to-analog D) Digital-to-digital
Last Answer : Digital-to-digital
Description : PCM is an example of _______ conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital
Last Answer : analog-to-digital
Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b
Last Answer : digital
Description : _______ signals canhave only alimited number of values. A) Analog B) Digital C) (a) or (b) D) None of the above
Description : _____ signals can have an infinite number of values ina range. A) Analog B) Digital C) (a) or (b) D) None of the above
Last Answer : Analog
Description : Compared to analog signals, digital signals A. allow faster transmission B. are moreaccurate C. both (a)and (b) D. All of theabove E. None of the above
Last Answer : both (a)and (b)
Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above
Last Answer : Modem
Description : A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation
Last Answer : c. multiplexing
Description : Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation
Last Answer : a. digital modulation
Description : The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as a. modulation b. demodulation c. synchronizing d. Digitizing
Last Answer : b. demodulation
Description : The signal which has infinitely many levels of intensity over a period of time is called ……… A. digital signal B. analog signal C. both a and b D. sound signal
Last Answer : A. digital signal
Description : A hybrid computer is the one having combined properties of ________ (A) Micro & Mini computers (B) Mini & Super Computers (C) Mainframe & Super Computers (D) Analog & Digital computers
Last Answer : (D) Analog & Digital computers
Description : Thetwo most common digital services are ________ service and______. A) switched/56; switched/64 B) switched/56; DDS C) DDS; swiched 64 D) leased; out-of-band
Last Answer : switched/56; DDS
Description : Sugar cane canbe fermented to make ______. a. Methane gas. b. Alcohol. c. Electricity. d. All of the above.
Last Answer : b. Alcohol.
Description : Analog computer works on the supply of a. Continuous electrical pulses b. Electrical pulses but not continuous c. Magnetic strength d. None of the above
Last Answer : Continuous electrical pulses
Description : An example of an analog communication method is a. laser beam b. microwave c. voice grade telephone line d. all of the above
Last Answer : all of the above
Description : Telephone companiesprovidetwotypes of analog services: analog _______services andanalog _____services. A) switched; in-band B) out-of-band; in-band C) switched; leased D) leased; out-of-band
Last Answer : switched; leased
Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above
Last Answer : WDM
Description : Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)
Last Answer : (a) and (c)
Description : Which of the following is not an analog-to-analog conversion? A) AM B) PM C) FM D) QAM
Last Answer : QAM
Description : Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)
Last Answer : band-pass
Description : The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov
Last Answer : PCM
Description : The digital signals to analog signals are carried out by ………., so that data can travel over telephone lines. -Technology
Last Answer : The digital signals to analog signals are carried out by MODEMso that data can travel over telephone lines.
Description : The primary purpose of the data modem is to A. interface analog terminal equipment to analog communications channel B. interface digital terminal equipment to analog communications ... to digital communications channel D. interface digital terminal equipment to digital communications channel
Last Answer : B. interface digital terminal equipment to analog communications channel
Description : Which of the following statements is NOT correct ? (A) Computer is capable of processing only digital signal (B) Computer is capable of analysing both quantitative and qualitative data (C) Appropriate ... for processing the data (D) Computer is capable of processing digital as well as analog signals
Last Answer : Answer: A
Description : An eight bit digital data 10101100 is fed to an ADC. The reference voltage is +10V. The analog output voltage will be: (1) 1.05V (2) 6.74V (3) 10.10V (4) 5.15V
Last Answer : An eight bit digital data 10101100 is fed to an ADC. The reference voltage is +10V. The analog output voltage will be: 6.74V.
Description : In the ________ method, a stationneeds to make a reservationbefore sending data. Time is divided into intervals. A) reservation B) polling C) token passing D) none of the above
Last Answer : reservation