Analog computer works on the supply of a. Continuous electrical pulses b. Electrical pulses but not continuous c. Magnetic strength d. None of the above

Analog computer works on the supply of
a. Continuous electrical pulses
b. Electrical pulses but not continuous
c. Magnetic strength
d. None of the above
by

1 Answer

Answer :

Continuous electrical pulses
by

Related questions

Analog computer works on the supply of A) Continuous electrical pulses B) Electrical pulses but not continuous C) Magnetic strength D) None of the above

Description : Analog computer works on the supply of A) Continuous electrical pulses B) Electrical pulses but not continuous C) Magnetic strength D) None of the above

Last Answer : Answer : A

Analog computer works on the supply of a. Continuous electrical pulses b. Electrical pulses but not continuous c. Magnetic strength d. None of the above

Description : Analog computer works on the supply of a. Continuous electrical pulses b. Electrical pulses but not continuous c. Magnetic strength d. None of the above

Last Answer : a. Continuous electrical pulses

Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than analog signals C. digital signals are smaller than analog signals and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Description : Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than ... and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Last Answer : A. repeaters regenerate digital pulses and remove distorstion

_____ data are continuousand take continuous values. A) analog B) digital C) (a) or (b) D) none of the above

Description : _____ data are continuousand take continuous values. A) analog B) digital C) (a) or (b) D) none of the above

Last Answer : analog

The first laser emitted a. Pulses of 694 nm red light b. A continuous red beam c. Pulses of white light from a helical flashlamp d. Spontaneous emission

Description : The first laser emitted a. Pulses of 694 nm red light b. A continuous red beam c. Pulses of white light from a helical flashlamp d. Spontaneous emission

Last Answer : a. Pulses of 694 nm red light

What is the non-continuous noise of irregular pulses or spikes of duration with high amplitudes? A. Wander B. Jitter C. Hits D. Singing

Description : What is the non-continuous noise of irregular pulses or spikes of duration with high amplitudes? A. Wander B. Jitter C. Hits D. Singing

Last Answer : B. Jitter

The first laser emitted ∙ a. Pulses of 694 nm red light ∙ b. A continuous red beam ∙ c. Pulses of white light from a helical flash lamp ∙ d. Spontaneous emission

Description : The first laser emitted ∙ a. Pulses of 694 nm red light ∙ b. A continuous red beam ∙ c. Pulses of white light from a helical flash lamp ∙ d. Spontaneous emission

Last Answer : ∙ a. Pulses of 694 nm red light

A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Description : A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Last Answer : Resembles both a digital and analog computer

A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Description : A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Last Answer : Resembles both a digital and analog computer

In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Description : In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Last Answer : All of above

A digital computer did not score over an analog computer in terms of a. Speed b. Accuracy c. Cost d. Memory

Description : A digital computer did not score over an analog computer in terms of a. Speed b. Accuracy c. Cost d. Memory

Last Answer : Accuracy

The computer that process both analog and digital is called a. Analog computer b. Digital computer c. Hybrid computer d. Mainframe computer

Description : The computer that process both analog and digital is called a. Analog computer b. Digital computer c. Hybrid computer d. Mainframe computer

Last Answer : Hybrid computer

The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as: a. modulation b. demodulation c. synchronizing d. digitising

Description : The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as: a. modulation b. demodulation c. synchronizing d. digitising

Last Answer : digitising

Data from a computer are_______; the local loop handles _______ signals. A) analog; analog B) analog; digital C) digital; digital D) digital; analog

Description : Data from a computer are_______; the local loop handles _______ signals. A) analog; analog B) analog; digital C) digital; digital D) digital; analog

Last Answer : digital; analog

The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as a. modulation b. demodulation c. synchronizing d. Digitizing

Description : The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as a. modulation b. demodulation c. synchronizing d. Digitizing

Last Answer : b. demodulation

Which of the following uses a very thin glass or plastic fiber through which pulses of light travel? a. Cat 1 b. Optical fiber c. Twisted pair d. Coax

Description : Which of the following uses a very thin glass or plastic fiber through which pulses of light travel? a. Cat 1 b. Optical fiber c. Twisted pair d. Coax

Last Answer : b. Optical fiber

Which of the following statements concerning analog and digital devices are correct? A. The variables in digital systems are fixed quantities, and the variables in analog systems are continuous quantities. B. There are no basic differences between the two systems. C. Analog devices are superior in accuracy compared to digital devices. D. Operations in a digital device are performed simultaneously.

Description : Which of the following statements concerning analog and digital devices are correct? A. The variables in digital systems are fixed quantities, and the variables in analog systems are continuous ... accuracy compared to digital devices. D. Operations in a digital device are performed simultaneously.

Last Answer : Answer: A

An example of digital, rather than analog, communication is a. DDD b. DDS c. WATS d. DDT

Description : An example of digital, rather than analog, communication is a. DDD b. DDS c. WATS d. DDT

Last Answer : DDS

An example of an analog communication method is a. laser beam b. microwave c. voice grade telephone line d. all of the above

Description : An example of an analog communication method is a. laser beam b. microwave c. voice grade telephone line d. all of the above

Last Answer : all of the above

In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Description : In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Last Answer : equilizer

Telephone companiesprovidetwotypes of analog services: analog _______services andanalog _____services. A) switched; in-band B) out-of-band; in-band C) switched; leased D) leased; out-of-band

Description : Telephone companiesprovidetwotypes of analog services: analog _______services andanalog _____services. A) switched; in-band B) out-of-band; in-band C) switched; leased D) leased; out-of-band

Last Answer : switched; leased

The moderntelephone network isnow ________. A) digital B) analog C) digital as well as analog D) none of the above

Description : The moderntelephone network isnow ________. A) digital B) analog C) digital as well as analog D) none of the above

Last Answer : digital as well as analog

The original telephone network, which is referred to as the plainold telephone system (POTS), was an ________system. A) digital B) analog C) digital as well as analog D) none of the above

Description : The original telephone network, which is referred to as the plainold telephone system (POTS), was an ________system. A) digital B) analog C) digital as well as analog D) none of the above

Last Answer : analog

_____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Last Answer : WDM

FSM isan _________technique. A) analog B) digital C) either (a)or (b) D) none of the above

Description : FSM isan _________technique. A) analog B) digital C) either (a)or (b) D) none of the above

Last Answer : analog

Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Description : Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Last Answer : (a) and (c)

Which of the following is not an analog-to-analog conversion? A) AM B) PM C) FM D) QAM

Description : Which of the following is not an analog-to-analog conversion? A) AM B) PM C) FM D) QAM

Last Answer : QAM

Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Description : Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Last Answer : band-pass

________conversion is therepresentation ofanalog information by an analog signal. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digita

Description : ________conversion is therepresentation ofanalog information by an analog signal. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digita

Last Answer : Analog-to-analog

_______ conversionis the process of changing one of the characteristics ofan analog signal basedon the informationin the digitaldata. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digital

Description : _______ conversionis the process of changing one of the characteristics ofan analog signal basedon the informationin the digitaldata. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digital

Last Answer : Digital-to-analog

AM and FM are examplesof ________ conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digita

Description : AM and FM are examplesof ________ conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digita

Last Answer : analog-to-analog

ASK, PSK, FSK,and QAM are examples of________conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital

Description : ASK, PSK, FSK,and QAM are examples of________conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital

Last Answer : digital-to-analog

The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Description : The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Last Answer : PCM

__________ conversion involves three techniques: line coding,block coding, and scrambling. A) Analog-to-digital B) Digital-to-analog C) Analog-to-analog D) Digital-to-digital

Description : __________ conversion involves three techniques: line coding,block coding, and scrambling. A) Analog-to-digital B) Digital-to-analog C) Analog-to-analog D) Digital-to-digital

Last Answer : Digital-to-digital

PCM is an example of _______ conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital

Description : PCM is an example of _______ conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital

Last Answer : analog-to-digital

A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Last Answer : digital

_______ signals canhave only alimited number of values. A) Analog B) Digital C) (a) or (b) D) None of the above

Description : _______ signals canhave only alimited number of values. A) Analog B) Digital C) (a) or (b) D) None of the above

Last Answer : Digital

_____ signals can have an infinite number of values ina range. A) Analog B) Digital C) (a) or (b) D) None of the above

Description : _____ signals can have an infinite number of values ina range. A) Analog B) Digital C) (a) or (b) D) None of the above

Last Answer : Analog

Signals can be ________. A) analog B) digitalC)either (a)or (b)D)neither (a) nor (b)

Description : Signals can be ________. A) analog B) digital C) either (a)or (b) D) neither (a) nor (b)

Last Answer : either (a)or (b)

_______ data have discretestates and take discrete values. A) Analog B) Digital C) (a) or (b) D) None of the above

Description : _______ data have discretestates and take discrete values. A) Analog B) Digital C) (a) or (b) D) None of the above

Last Answer : Digital

Data canbe ________. A) analog B) digital C) (a) or (b) D) none of the above

Description : Data canbe ________. A) analog B) digital C) (a) or (b) D) none of the above

Last Answer : (a) or (b)

Compared to analog signals, digital signals A. allow faster transmission B. are moreaccurate C. both (a)and (b) D. All of theabove E. None of the above

Description : Compared to analog signals, digital signals A. allow faster transmission B. are moreaccurate C. both (a)and (b) D. All of theabove E. None of the above

Last Answer : both (a)and (b)

Demodulation is aprocessof A. converting analog to digital signals B. converting digital to analogsignals C. multiplexing various signals intoone high speed line signals D. performing data description

Description : Demodulation is aprocessof A. converting analog to digital signals B. converting digital to analogsignals C. multiplexing various signals intoone high speed line signals D. performing data description

Last Answer : converting analog to digital signals

Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation

Description : A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation

Last Answer : c. multiplexing

Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Description : Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Last Answer : a. digital modulation

The signal which has infinitely many levels of intensity over a period of time is called ……… A. digital signal B. analog signal C. both a and b D. sound signal

Description : The signal which has infinitely many levels of intensity over a period of time is called ……… A. digital signal B. analog signal C. both a and b D. sound signal

Last Answer : A. digital signal

The air gap in an induction motor should be checked periodically with a feeler gage to detect ____________. A. rotor contact with the laminations B. changes in armature magnetic strength C. excessive bearing wear D. electrical damage to the rotor

Description : The air gap in an induction motor should be checked periodically with a feeler gage to detect ____________. A. rotor contact with the laminations B. changes in armature magnetic strength C. excessive bearing wear D. electrical damage to the rotor

Last Answer : Answer: C

The Tesla and the Gauss are units of measure of: w) conductance x) magnetic field strength y) magnetic flux z) electrical current

Description : The Tesla and the Gauss are units of measure of: w) conductance x) magnetic field strength y) magnetic flux z) electrical current

Last Answer : ANSWER: X -- MAGNETIC FIELD STRENGTH

What instructs electrical pulses to move any part of an organism, and then what instructs that part to release any energy at all?

Description : What instructs electrical pulses to move any part of an organism, and then what instructs that part to release any energy at all?

Last Answer : If I understand your question, this is a good basic description of the interaction between an electrical nerve impulse and a muscle.