AM and FM are examplesof ________ conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digita

AM and FM are examplesof ________ conversion.
A)
digital-to-digital
B)
digital-to-analog
C)
analog-to-analog
D)
analog-to-digita
by

1 Answer

Answer :

analog-to-analog
by

Related questions

________conversion is therepresentation ofanalog information by an analog signal. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digita

Description : ________conversion is therepresentation ofanalog information by an analog signal. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digita

Last Answer : Analog-to-analog

Which of the following is not an analog-to-analog conversion? A) AM B) PM C) FM D) QAM

Description : Which of the following is not an analog-to-analog conversion? A) AM B) PM C) FM D) QAM

Last Answer : QAM

__________ conversion involves three techniques: line coding,block coding, and scrambling. A) Analog-to-digital B) Digital-to-analog C) Analog-to-analog D) Digital-to-digital

Description : __________ conversion involves three techniques: line coding,block coding, and scrambling. A) Analog-to-digital B) Digital-to-analog C) Analog-to-analog D) Digital-to-digital

Last Answer : Digital-to-digital

PCM is an example of _______ conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital

Description : PCM is an example of _______ conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital

Last Answer : analog-to-digital

Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

The moderntelephone network isnow ________. A) digital B) analog C) digital as well as analog D) none of the above

Description : The moderntelephone network isnow ________. A) digital B) analog C) digital as well as analog D) none of the above

Last Answer : digital as well as analog

Data canbe ________. A) analog B) digital C) (a) or (b) D) none of the above

Description : Data canbe ________. A) analog B) digital C) (a) or (b) D) none of the above

Last Answer : (a) or (b)

Both frequency and phase modulation utilize ________ modulation A. Phase B. AM and FM C. Digital D. Angle

Description : Both frequency and phase modulation utilize ________ modulation A. Phase B. AM and FM C. Digital D. Angle

Last Answer : D. Angle

Signals can be ________. A) analog B) digitalC)either (a)or (b)D)neither (a) nor (b)

Description : Signals can be ________. A) analog B) digital C) either (a)or (b) D) neither (a) nor (b)

Last Answer : either (a)or (b)

A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Description : A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Last Answer : Resembles both a digital and analog computer

A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Description : A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Last Answer : Resembles both a digital and analog computer

In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Description : In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above

Last Answer : All of above

A digital computer did not score over an analog computer in terms of a. Speed b. Accuracy c. Cost d. Memory

Description : A digital computer did not score over an analog computer in terms of a. Speed b. Accuracy c. Cost d. Memory

Last Answer : Accuracy

The computer that process both analog and digital is called a. Analog computer b. Digital computer c. Hybrid computer d. Mainframe computer

Description : The computer that process both analog and digital is called a. Analog computer b. Digital computer c. Hybrid computer d. Mainframe computer

Last Answer : Hybrid computer

An example of digital, rather than analog, communication is a. DDD b. DDS c. WATS d. DDT

Description : An example of digital, rather than analog, communication is a. DDD b. DDS c. WATS d. DDT

Last Answer : DDS

In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Description : In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Last Answer : equilizer

The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as: a. modulation b. demodulation c. synchronizing d. digitising

Description : The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as: a. modulation b. demodulation c. synchronizing d. digitising

Last Answer : digitising

The original telephone network, which is referred to as the plainold telephone system (POTS), was an ________system. A) digital B) analog C) digital as well as analog D) none of the above

Description : The original telephone network, which is referred to as the plainold telephone system (POTS), was an ________system. A) digital B) analog C) digital as well as analog D) none of the above

Last Answer : analog

Data from a computer are_______; the local loop handles _______ signals. A) analog; analog B) analog; digital C) digital; digital D) digital; analog

Description : Data from a computer are_______; the local loop handles _______ signals. A) analog; analog B) analog; digital C) digital; digital D) digital; analog

Last Answer : digital; analog

FSM isan _________technique. A) analog B) digital C) either (a)or (b) D) none of the above

Description : FSM isan _________technique. A) analog B) digital C) either (a)or (b) D) none of the above

Last Answer : analog

_______ conversionis the process of changing one of the characteristics ofan analog signal basedon the informationin the digitaldata. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digital

Description : _______ conversionis the process of changing one of the characteristics ofan analog signal basedon the informationin the digitaldata. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digital

Last Answer : Digital-to-analog

ASK, PSK, FSK,and QAM are examples of________conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital

Description : ASK, PSK, FSK,and QAM are examples of________conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital

Last Answer : digital-to-analog

A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Last Answer : digital

_______ signals canhave only alimited number of values. A) Analog B) Digital C) (a) or (b) D) None of the above

Description : _______ signals canhave only alimited number of values. A) Analog B) Digital C) (a) or (b) D) None of the above

Last Answer : Digital

_____ signals can have an infinite number of values ina range. A) Analog B) Digital C) (a) or (b) D) None of the above

Description : _____ signals can have an infinite number of values ina range. A) Analog B) Digital C) (a) or (b) D) None of the above

Last Answer : Analog

_______ data have discretestates and take discrete values. A) Analog B) Digital C) (a) or (b) D) None of the above

Description : _______ data have discretestates and take discrete values. A) Analog B) Digital C) (a) or (b) D) None of the above

Last Answer : Digital

_____ data are continuousand take continuous values. A) analog B) digital C) (a) or (b) D) none of the above

Description : _____ data are continuousand take continuous values. A) analog B) digital C) (a) or (b) D) none of the above

Last Answer : analog

Compared to analog signals, digital signals A. allow faster transmission B. are moreaccurate C. both (a)and (b) D. All of theabove E. None of the above

Description : Compared to analog signals, digital signals A. allow faster transmission B. are moreaccurate C. both (a)and (b) D. All of theabove E. None of the above

Last Answer : both (a)and (b)

Demodulation is aprocessof A. converting analog to digital signals B. converting digital to analogsignals C. multiplexing various signals intoone high speed line signals D. performing data description

Description : Demodulation is aprocessof A. converting analog to digital signals B. converting digital to analogsignals C. multiplexing various signals intoone high speed line signals D. performing data description

Last Answer : converting analog to digital signals

A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation

Description : A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation

Last Answer : c. multiplexing

Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Description : Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Last Answer : a. digital modulation

The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as a. modulation b. demodulation c. synchronizing d. Digitizing

Description : The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as a. modulation b. demodulation c. synchronizing d. Digitizing

Last Answer : b. demodulation

The signal which has infinitely many levels of intensity over a period of time is called ……… A. digital signal B. analog signal C. both a and b D. sound signal

Description : The signal which has infinitely many levels of intensity over a period of time is called ……… A. digital signal B. analog signal C. both a and b D. sound signal

Last Answer : A. digital signal

The conversion of digital signal into analog for purposes of transmitting into the telephone line is done through ______. A. ISDN B. Radio C. RS232C D. Modem

Description : The conversion of digital signal into analog for purposes of transmitting into the telephone line is done through ______. A. ISDN B. Radio C. RS232C D. Modem

Last Answer : D. Modem

Which of the following steps is/are not required for analog to digital conversion ? (a) Sensing (b) Conversion (c) Amplification (d) Conditioning (e) Quantization Codes : (A) (a) and (b) (B) (c) and (d) (C) (a), (b) and (e) (D) None of the above

Description : Which of the following steps is/are not required for analog to digital conversion ? (a) Sensing (b) Conversion (c) Amplification (d) Conditioning (e) Quantization Codes : (A) (a) and (b) (B) (c) and (d) (C) (a), (b) and (e) (D) None of the above

Last Answer : (D) None of the above

State working principle of analog to digital and digital to analog conversion.

Description : State working principle of analog to digital and digital to analog conversion.

Last Answer : i) Analog-to-digital Converters: In a digital computer control system, the plant output (or controlled variable) is usually an analog signal, which is measured by sensors (or instruments). This ... that provides an output voltage or current normalized to a full-scale (FS) reference value.

In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : PM

In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as the amplitudeof the information signal changes, thefrequency of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Last Answer : FM

In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : AM

A hybrid computer is the one having combined properties of ________ (A) Micro & Mini computers (B) Mini & Super Computers (C) Mainframe & Super Computers (D) Analog & Digital computers

Description : A hybrid computer is the one having combined properties of ________ (A) Micro & Mini computers (B) Mini & Super Computers (C) Mainframe & Super Computers (D) Analog & Digital computers

Last Answer : (D) Analog & Digital computers

Thetwo most common digital services are ________ service and______. A) switched/56; switched/64 B) switched/56; DDS C) DDS; swiched 64 D) leased; out-of-band

Description : Thetwo most common digital services are ________ service and______. A) switched/56; switched/64 B) switched/56; DDS C) DDS; swiched 64 D) leased; out-of-band

Last Answer : switched/56; DDS

The Federal Communications Commission (FCC) allows ______ kHz for each FM station. A) 20 B) 100 C) 200 D) none of the above

Description : The Federal Communications Commission (FCC) allows ______ kHz for each FM station. A) 20 B) 100 C) 200 D) none of the above

Last Answer : 100

What frequency range is used for FM radio transmission? A. Very Low Frequency : 3 kHz to 30. kHz B. Low Frequency :30 kHz to 300 kHz C. High Frequency :3 MHz to 30 MHz D. Very High Frequency : 30 MHz to 300 MHz E. None of the above

Description : What frequency range is used for FM radio transmission? A. Very Low Frequency : 3 kHz to 30. kHz B. Low Frequency :30 kHz to 300 kHz C. High Frequency :3 MHz to 30 MHz D. Very High Frequency : 30 MHz to 300 MHz E. None of the above

Last Answer : Very High Frequency : 30 MHz to 300 MHz

What modulation is normally used with digital data? A. AM B. FM C. SSB D. QPSK

Description : What modulation is normally used with digital data? A. AM B. FM C. SSB D. QPSK

Last Answer : D. QPSK

Analog computer works on the supply of a. Continuous electrical pulses b. Electrical pulses but not continuous c. Magnetic strength d. None of the above

Description : Analog computer works on the supply of a. Continuous electrical pulses b. Electrical pulses but not continuous c. Magnetic strength d. None of the above

Last Answer : Continuous electrical pulses

An example of an analog communication method is a. laser beam b. microwave c. voice grade telephone line d. all of the above

Description : An example of an analog communication method is a. laser beam b. microwave c. voice grade telephone line d. all of the above

Last Answer : all of the above

Telephone companiesprovidetwotypes of analog services: analog _______services andanalog _____services. A) switched; in-band B) out-of-band; in-band C) switched; leased D) leased; out-of-band

Description : Telephone companiesprovidetwotypes of analog services: analog _______services andanalog _____services. A) switched; in-band B) out-of-band; in-band C) switched; leased D) leased; out-of-band

Last Answer : switched; leased

_____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Last Answer : WDM

Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Description : Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Last Answer : (a) and (c)

Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Description : Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Last Answer : band-pass