Description : The Federal Communications Commission (FCC) allows ______kHz for each AM station. A) 5 B) 10 C) 20 D) none of the above
Last Answer : 0
Description : What organization has published safety guidelines for the maximum limits of RF energy near the human body? A. The American National Standards Institute (ANSI). B. The Environmental Protection ... Communications Commission (FCC). D. The Institute Of Electrical and Electronics Engineers (IEEE).
Last Answer : A. The American National Standards Institute (ANSI).
Description : Which organization has authority over interstate andinternational commerce in the communications field? A) ITU-T B) IEEE C) FCC D) ISOC
Last Answer : FCC
Description : What's involved in establishing a low power FM station? The FCC materials are lawyer-speak to me.
Last Answer : Join a local amateur ham-radio club in your area they will gladly help you out. Or just cruise your neighbor hood and look for the tall radio towers in someones back yard and knock on their door. ... of people. You could seach for a club here http://www.arrl.org/FandES/field/club/clubsearch.phtml
Description : What frequency range is used for FM radio transmission? A. Very Low Frequency : 3 kHz to 30. kHz B. Low Frequency :30 kHz to 300 kHz C. High Frequency :3 MHz to 30 MHz D. Very High Frequency : 30 MHz to 300 MHz E. None of the above
Last Answer : Very High Frequency : 30 MHz to 300 MHz
Description : Did the FCC(Federal Communication Commission) make the correct decision with cellphones?
Last Answer : Okay here is my opinion. I think we would've saved alot of money. I have had 3 different phones, my husband has had 6. I believe we would all be using very sophisticated walkie talkies to speak to each ... they would charge for that. I could be wrong and way off, but thats my opinion such as it is.
Description : What is the approximate bandwidth of an FM system with 10 kHz of modulating frequency and a 150 kHz of frequency deviation? A. 300 kHz B. 320 kHz C. 150 kHz D. 200 kHz
Last Answer : B. 320 kHz
Description : Frequencies above ______ kHz, are referred to as the radio frequencies. A. 20 B. 2 C. 10 D. 200
Last Answer : A. 20
Description : If the FCC had given the license to CB Operators, instead of cellphones, how would this have effected communications as we now know it?
Last Answer : How would that have worked? CB is transceiver to transceiver, and cell/mobile is transceiver to tower and backhaul with a backbone wired network.
Description : What was the purpose of the Federal Communications Commission?
Last Answer : TO license and regulate radio and tevelsion
Description : In a three-stage space division switch, if N = 200, the number of crosspoints is ______. A) 40,000 B) greater than 40,000 C) less than40,000 D) greater than 100,000
Last Answer : ess than40,00
Description : A periodic signal completes onecycle in 0.001 s. What is thefrequency? A) 1 Hz B) 100 Hz C) 1 KHz D) 1 MHz
Last Answer : 1 KHz
Description : ______ cable is used for voice and data communications. A) Coaxial B) Fiber-optic C) Twisted-pair D) none of the above
Last Answer : Twisted-pair
Description : The length of a Marconi antenna to operate with 985 kHz is ______. A. 200 ft B. 500 ft C. 250 ft D. 999 ft
Last Answer : C. 250 ft
Description : In a one-stage space division switch, if N = 200, the number of crosspoints is ______. A) 10,000 B) 20,000 C) 40,000 D) 30,000
Last Answer : 40,000
Description : A class A FM station is limited in antenna height of ______ feet above average terrain.
Last Answer : 2000
Description : What is the spectrum of stereophonic FM signal? A. 19 to 38 kHz B. 30 to 53 kHz C. 59.5 to 74.5 kHz D. 88 to 108 MHz
Last Answer : B. 30 to 53 kHz
Description : Cellular radios use FM with a maximum deviation of A. ±30 khz B. ±75 khz C. ±25 khz D. ±12 khz
Last Answer : D. ±12 khz
Description : What is the deviation ratio for an FM-phone signal having a maximum frequency swing of plus or minus 5 kHz and accepting a maximum modulation rate of 3kHz? A. 60 B. 0.16 C. 0.6 D. 1.66
Last Answer : D. 1.66
Description : The frequency spectrum of the stereophonic FM signal. A. 67 kHz B. 59.5 to 74.5 kHz C. 19 to 38 kHz D. 30 to 53 kHz
Last Answer : D. 30 to 53 kHz
Description : The carrier swing necessary to provide 80% modulation in the FM broadcasting band is __________. A. 150 kHz B. 120 kHz C. 60 kHz D. 75 kHz
Last Answer : B. 120 kHz
Description : For AM, fc =500kHz , fm = 5 kHz Determine: (i) Upper and lower sideband frequencies (ii) Bandwidth
Last Answer : Given data fc = 500KHz , fm = 5KHz USB =fc+fm USB = 500+5 =505 KHz. LSB =fc – fm LSB = 500 – 5 =495 KHz Bandwidth = 2fm . = 2* 5 =10 KHz
Description : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: - a) 2 b) 5 c) 3 d) 4
Last Answer : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: - 5
Description : A radio station is broadcasting at 3750 khz (kilohertz). This station would be found in which radio band? w) 20 meter x) 40 meter y) 80 meter z) 160 meter
Last Answer : ANSWER: Y -- 80 METER
Description : In acoustics, if the volume of the room is 200 m3 then at what frequency the coefficient of absorption is measured? A. 120 kHz B. 120 Hz C. 100 Hz D. 150 Hz
Last Answer : B. 120 Hz
Description : What is the typical frequency used for communicating to submerged submarines? A. 100 Hz B. 500 Hz C. 4 kHz D. 200 Hz
Last Answer : A. 100 Hz
Description : How wide is the spectrum bandwidth of a single GSM carrier? A. 100 kHz B. 200 kHz C. 50 kHz D. 16 kHz
Last Answer : B. 200 kHz
Description : Which of the following frequencies is normally used for distress and safety communications? A. 4209.5 kHz B. 490 kHz C. 518 kHz D. 2174.5 kHz
Last Answer : D. 2174.5 kHz
Description : Industrial noise frequency is between _________. A. 200 to 3000 Mhz B. 15 to 160 Mhz C. 0 to 10 Khz D. 20 Ghz
Last Answer : B. 15 to 160 Mhz
Description : In ______, the chanceof collisioncan be reduced if a station senses the medium beforetrying touse it. A) MA B) CSMA C) FDMA D) CDMA
Last Answer : CSMA
Description : When internet data leaves your campus, it normallygoes toa(n) ______ before moving towardits destination. A) Internet backbone B) Networkaccesspoint C) Base station D) Communication system
Last Answer : Networkaccesspoint
Description : How many users or voice channels are supported for each 200 KHz channel in GSM? a) Eight b) Three c) Sixty four d) Twelve
Last Answer : a) Eight
Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58
Last Answer : b. 0.184
Description : Which does not use vertical polarization antenna? A. AM Broadcasting B. FM Broadcasting C. Mobile Communications D. Satellite Communications
Last Answer : B. FM Broadcasting
Description : Given an AM radio signal with abandwidth of10 KHzand the highest-frequency component at 705 KHz, what is the frequency of the carrier signal? A) 700 KHz B) 705 KHz C) 710 KHz D) Cannot bedetermined from giveninformation
Last Answer : 700 KHz
Description : What is the bandwidth ofa signal that ranges from 1 MHz to4 MHz? A) 4 MHz B) 1 KHz C) 3 MHz D) none of the above
Last Answer : 3 MHz
Description : If the bandwidth of a signal is 5 KHz and thelowest frequency is 52 KHz, what is the highest frequency? A) 5 KHz B) 10 KHz C) 47 KHz D) 57 KHz
Last Answer : 57 KHz
Description : A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate? A. 3 Kbps B. 6 Kbps C. 12 Kbps D. 24 Kbps
Last Answer : 6 Kbps
Description : The _______ protocol allows the administrator toassign acost, called the metric, to each route. A) OSPF B) RIP C) BGP D) none of the above
Last Answer : OSPF
Description : In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above
Last Answer : PM
Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above
Last Answer : FM
Description : In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above
Last Answer : AM
Description : Which of the following is not an analog-to-analog conversion? A) AM B) PM C) FM D) QAM
Last Answer : QAM
Description : AM and FM are examplesof ________ conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digita
Last Answer : analog-to-analog
Description : A super heterodyne AM receiver is tuned to a station operating at 1200 KHz .Find local oscillator frequency and image frequency.
Last Answer : A super heterodyne AM receiver is tuned to a station operating at 1200 KHz Intermediate frequency is 455KHz. IF frequency=f0-fs Local oscillator frequency is f0=IF +fs=455K+1200K=1655kHz The image frequency which gives the same IF is f0+2*IF=2110KHz
Description : Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B ... What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320
Last Answer : b. 40
Description : Avalanche photodiode receivers can detect bits of transmitted data by receiving a. 100 photons b. 200 photons c. 2000 photons d. 300 photons
Last Answer : 200 photons
Description : Avalanche photodiode receivers candetect hits of transmitted databy receiving A. 100 photons B. 200 photons C. 300 photons D. 400 photons E. None of the above
Description : The maximum length of a "thick" Ethernet cable is ……….. A. 100 meters B. 200 meters C. 500 meters D. 1000meters
Last Answer : C. 500 meters
Description : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is: (1) 25 (2) 50 (3) 100 (4) 200
Last Answer : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is: 200.