The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called a. ASCIIb. EBCDICc. BCDd. All of above

The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system
is called
a. ASCII
b. EBCDIC
c. BCD
d. All of above
by

1 Answer

Answer :

ASCII
by

Related questions

The commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called A) ASCII B) EBCDIC C) BCD D) All of above

Description : The commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called A) ASCII B) EBCDIC C) BCD D) All of above

Last Answer : Answer : D

The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called A) ASCII B) EBCDIC C) BCD D) All of above

Description : The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called A) ASCII B) EBCDIC C) BCD D) All of above

Last Answer : Answer : A

The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called a. ASCII b. EBCDIC c. BCD d. All of above

Description : The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called a. ASCII b. EBCDIC c. BCD d. All of above

Last Answer : a. ASCII

The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called a. ASCII b. EBCDIC c. BCD d. All of above

Description : The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called a. ASCII b. EBCDIC c. BCD d. All of above

Last Answer : a. ASCII

Which code used to represent numbers, letters, punctuation marks as well as control characters: a. ASCII b. EBCDIC c. Both d. None of these

Description : Which code used to represent numbers, letters, punctuation marks as well as control characters: a. ASCII b. EBCDIC c. Both d. None of these

Last Answer : a. ASCII

sare the codes that represent alphabetic characters, punctuation marks and other special characters: a. Alphanumeric codes b. ASCII codes c. EBCDIC codes d. All of these

Description : sare the codes that represent alphabetic characters, punctuation marks and other special characters: a. Alphanumeric codes b. ASCII codes c. EBCDIC codes d. All of these

Last Answer : a. Alphanumeric codes

A modern electronic computer is a machine that is meant for a. Doing quick mathematical calculations b. Input, storage, manipulation and outputting of data c. Electronic data processing d. Performing repetitive tasks accuratel

Description : A modern electronic computer is a machine that is meant for a. Doing quick mathematical calculations b. Input, storage, manipulation and outputting of data c. Electronic data processing d. Performing repetitive tasks accuratel

Last Answer : Input, storage, manipulation and outputting of data

This first step inthe transaction processing cycle captures businessdata throughvarious modes suchas optical scanning orat an electronic commerce website– (A) Document and report generation (B) Database maintenance (C) Transaction processing startup (D) Data Entry

Description : This first step inthe transaction processing cycle captures businessdata throughvarious modes suchas optical scanning orat an electronic commerce website– (A) Document and report generation (B) Database maintenance (C) Transaction processing startup (D) Data Entry

Last Answer : Data Entry

An ASCII is a character-encoding scheme that is employed by personal computers in order to represent various characters, numbers and control keys that the computer user selects on the keyboard. ASCII is an acronym for (A) American Standard Code for Information Interchange (B) American Standard Code for Intelligent Information (C) American Standard Code for Information Integrity (D) American Standard Code for Isolated Information

Description : An ASCII is a character-encoding scheme that is employed by personal computers in order to represent various characters, numbers and control keys that the computer user selects on the ... C) American Standard Code for Information Integrity (D) American Standard Code for Isolated Information

Last Answer : (A) American Standard Code for Information Interchange

Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Description : Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Last Answer : 120

Which type of graph displays data with bars that represent numerical amounts?

Description : Which type of graph displays data with bars that represent numerical amounts?

Last Answer : bar

The credit ratings are expressed as____.(a) Alphabetical b) Alpha numerical c) both)

Description : The credit ratings are expressed as____.(a) Alphabetical b) Alpha numerical c) both)

Last Answer : b) Alpha numerical

EBCDIC can code up to how many different characters? a. 256 b. 16 c. 32 d. 64

Description : EBCDIC can code up to how many different characters? a. 256 b. 16 c. 32 d. 64

Last Answer : 256

EBCDIC can code up to how many different characters? a. 256 b. 16 c. 32 d. 64

Description : EBCDIC can code up to how many different characters? a. 256 b. 16 c. 32 d. 64

Last Answer : 256

Printer resolution is a numerical measure of print quality that is measured in _______ A. Pages Per Minute (PPM) B. Lines Per Minute (LPM) C. Characters Per Second (CPS) D. Dots Per Inch (DPI)

Description : Printer resolution is a numerical measure of print quality that is measured in _______ A. Pages Per Minute (PPM) B. Lines Per Minute (LPM) C. Characters Per Second (CPS) D. Dots Per Inch (DPI)

Last Answer : D. Dots Per Inch (DPI)

In the third generation of computers: a. Distributed data processing first became popular b. An operating system was first developed c. High-level prcedu7ral languages were firs used d. On-line, real time systems first became popular

Description : In the third generation of computers: a. Distributed data processing first became popular b. An operating system was first developed c. High-level prcedu7ral languages were firs used d. On-line, real time systems first became popular

Last Answer : On-line, real time systems first became popular

The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code

Description : The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code

Last Answer : A machine that works on binary code

………….. gives defining the flow of the data through and organization or a company or series of tasks that may or may not represent computerized processing. A) System process B) System flowchart C) System design D) Structured System

Description : ………….. gives defining the flow of the data through and organization or a company or series of tasks that may or may not represent computerized processing. A) System process B) System flowchart C) System design D) Structured System

Last Answer : B) System flowchart

The number of characters that can be stored in given physical space is a. Word length b. Byte c. Data density d. Field

Description : The number of characters that can be stored in given physical space is a. Word length b. Byte c. Data density d. Field

Last Answer : Data density

A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? a. 50 b. 200 c. 400 d. 800

Description : A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? a. 50 b. 200 c. 400 d. 800

Last Answer : c. 400

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

What is Software ? Set of computer programs, procedures and possibly associated document concerned with the operation of data processing. A set of compiler instructions A mathematical formula None of above

Description : What is Software ? Set of computer programs, procedures and possibly associated document concerned with the operation of data processing. A set of compiler instructions A mathematical formula None of above

Last Answer : Set of computer programs, procedures and possibly associated document concerned with the operation of data processin

Which most popular input device is used today for interactive processing and for the one line entry of data for batch processing? a. Mouse b. Magnetic disk c. Visual display terminal d. Card punch

Description : Which most popular input device is used today for interactive processing and for the one line entry of data for batch processing? a. Mouse b. Magnetic disk c. Visual display terminal d. Card punch

Last Answer : Mouse

Actual data processing operations are performed in the arithmetic logic section, but not in the “. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the “. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : Primary

A characteristic of card systems is: a. Slowness in processing data b. Using cards as records of transactions c. Needing a larger DP staff d. All of the above

Description : A characteristic of card systems is: a. Slowness in processing data b. Using cards as records of transactions c. Needing a larger DP staff d. All of the above

Last Answer : All of the above

A remote batch-processing operation in which data is solely input to a central computer would require a. telegraphp line b. simplex lines c. mixed bad channel d. all of above

Description : A remote batch-processing operation in which data is solely input to a central computer would require a. telegraphp line b. simplex lines c. mixed bad channel d. all of above

Last Answer : simplex lines

Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half duplex line is a communication line in which data can move in two directions, but not at the same time. c. Teleprocessing combines telecommunications and DP techniques in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

Consider the formula in image processing RD = 1 - (1/CR) Where CR = n1/n2 CR is called as compression ratio n1 and n2 denotes the number of information carrying units in two datasets that represent the same information. In this situation RD is called as relative ................ of the first data set. (A) Data Compression (B) Data Redundancy (C) Data Relation (D) Data Representation

Description : Consider the formula in image processing RD = 1 - (1/CR) Where CR = n1/n2 CR is called as compression ratio n1 and n2 denotes the number of information carrying units in two datasets that represent ... . (A) Data Compression (B) Data Redundancy (C) Data Relation (D) Data Representation

Last Answer : (B) Data Redundancy

ASCII stands for a. American Stable Code for International Interchange b. American Standard Case for Institutional Interchange c. American Standard Code for Information Interchange d. American Standard Code for Interchange Information

Description : ASCII stands for a. American Stable Code for International Interchange b. American Standard Case for Institutional Interchange c. American Standard Code for Information Interchange d. American Standard Code for Interchange Information

Last Answer : American Standard Code for Information Interchange

What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Last Answer : B) Baud

What is the name of the softwarepackage that allows peopleto sendelectronic mail along anetworkof computers and workstations? A. Memory residentpackage B. Project management package C. Data communication package D. Electronic mail package E. None of the above

Description : What is the name of the softwarepackage that allows peopleto sendelectronic mail along anetworkof computers and workstations? A. Memory residentpackage B. Project management package C. Data communication package D. Electronic mail package E. None of the above

Last Answer : Data communication package

The standard ASCII A. is version II of ASC B. is used only in US and Canada C. has 132 characters including 32 control characters D. is subset of 8-bit EBCDIC code

Description : The standard ASCII A. is version II of ASC B. is used only in US and Canada C. has 132 characters including 32 control characters D. is subset of 8-bit EBCDIC code

Last Answer : C. has 132 characters including 32 control characters

What is the commonly used unit for measuring the sped of data transmission? 1) Bits per second 2) Nano seconds 3) Characters per second 4) Mega Hertz

Description : What is the commonly used unit for measuring the sped of data transmission? 1) Bits per second 2) Nano seconds 3) Characters per second 4) Mega Hertz

Last Answer : 1) Bits per second

What is the commonly used unit for measuring the speed of data transmission ? (1) Mega Hertz (2) Characters per second (3) Bits per second (4) Nano seconds

Description : What is the commonly used unit for measuring the speed of data transmission ? (1) Mega Hertz (2) Characters per second (3) Bits per second (4) Nano seconds

Last Answer : Bits per second 

Which are microcomputers commonly used for commercial data processing, desktop publishing and engineering application. a. Digital computer b. Personal computer c. Both d. None of these

Description : Which are microcomputers commonly used for commercial data processing, desktop publishing and engineering application. a. Digital computer b. Personal computer c. Both d. None of these

Last Answer : b. Personal computer

The 'dielectric constant' is a numerical value indicating the effectiveness of a dielectric material in comparison to that of a standard, which is _______________. A. paper or cloth B. glass or mica C. plastic or Teflon D. dry air or a vacuum

Description : The 'dielectric constant' is a numerical value indicating the effectiveness of a dielectric material in comparison to that of a standard, which is _______________. A. paper or cloth B. glass or mica C. plastic or Teflon D. dry air or a vacuum

Last Answer : Answer: D

A modern electronic computer is a machine that is meant for A) Doing quick mathematical calculations B) Input, storage, manipulation and outputting of data C) Electronic data processing D) Performing repetitive tasks accurately

Description : A modern electronic computer is a machine that is meant for A) Doing quick mathematical calculations B) Input, storage, manipulation and outputting of data C) Electronic data processing D) Performing repetitive tasks accurately

Last Answer : Answer : B

Define Electronic Data Processing.

Description : Define Electronic Data Processing.

Last Answer : The process of performing arithmetic and logic operations with the help of computer is known as electronic data processing.

A modern electronic computer is a machine that is meant for a. Doing quick mathematical calculations b. Input, storage, manipulation and outputting of data c. Electronic data processing d. Performing repetitive tasks accurately

Description : A modern electronic computer is a machine that is meant for a. Doing quick mathematical calculations b. Input, storage, manipulation and outputting of data c. Electronic data processing d. Performing repetitive tasks accurately

Last Answer : b. Input, storage, manipulation and outputting of data

With regard to a word processing software, the process of combining static information in a publication together with variable information in a data source to create one merged publication is calle d( A) Electronic mail (B) Data sourcing (C) Mail merge (D) Spam mail

Description : With regard to a word processing software, the process of combining static information in a publication together with variable information in a data source to create one merged publication is calle d( A) Electronic mail (B) Data sourcing (C) Mail merge (D) Spam mail

Last Answer : (C) Mail merge 

Groupingand processing allof a firm's transactionsat one time is called– (A) a database management system (B) batch processing (C) a real-time system (D) an on-line system (E) None of these

Description : Groupingand processing allof a firm's transactionsat one time is called– (A) a database management system (B) batch processing (C) a real-time system (D) an on-line system (E) None of these

Last Answer : batch processing

A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CPS

Description : A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CPS

Last Answer : MIPS

The brain of any computer system is a. Control Unit b. Arithmetic Logic Unit c. Central Processing Unit d. Storage Unit

Description : The brain of any computer system is a. Control Unit b. Arithmetic Logic Unit c. Central Processing Unit d. Storage Unit

Last Answer : Central Processing Unit

Fifth generation computer is also known as a. Knowledge information processing system b. Very large scale integration (VLSI) c. Both of above d. None of above

Description : Fifth generation computer is also known as a. Knowledge information processing system b. Very large scale integration (VLSI) c. Both of above d. None of above

Last Answer : Knowledge information processing system

Numerical indication of how efficiently a PCM code is utilized

Description : Numerical indication of how efficiently a PCM code is utilized

Last Answer : Coding efficiency

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Description : The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Last Answer : DTE/DCE interface

A logical schema A. is the entire database B. is a standard wayof organizing information into accessible parts C. describes how data is actually stored on disk D. All of theabove E. None of the above

Description : A logical schema A. is the entire database B. is a standard wayof organizing information into accessible parts C. describes how data is actually stored on disk D. All of theabove E. None of the above

Last Answer : is a standard wayof organizing information into accessible parts

A ________ is a set of rules that governs data communication. A) forum B) protocol C) standard D) none of the above

Description : A ________ is a set of rules that governs data communication. A) forum B) protocol C) standard D) none of the above

Last Answer : protocol