Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps
Last Answer : C. 320 bps
Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200
Last Answer : b. 800
Description : If digitaldata rateof 9600 bps is encoded using 8-level phaseshift keying (PSK) method, the modulation rate is A. 1200 bands B. 3200 bands C. 4800 bands D. 9600 bands E. None of the above
Last Answer : 3200 bands
Description : What arethe most commonly used transmission speeds in BPS usedin datacommunication? A. 300 B. 1200 C. 2400 D. 9600 E. None of the above
Last Answer : 9600
Description : If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200
Last Answer : 1000
Description : If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200
Last Answer : 1200
Description : f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200
Description : How many characters per sec (7 bits + 1 parity ) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start and 1 stop bit)?
Last Answer : 1. 300 2. 240 3. 250 4. 275 Ans- 2400/(7+1+2) 240
Description : How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)? A) 300 B) 240 C) 250 D) 275
Last Answer : How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)? 300
Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above
Last Answer : (B) 3 bits/baud
Description : A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? a. 50 b. 200 c. 400 d. 800
Last Answer : c. 400
Description : In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable
Last Answer : c. 20 metres of cable.
Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps
Last Answer : a. 2 Mbps
Description : Iridium satellites can provide data communications of up ____ bps data rate. A. 1200 B. 4800 C. 2400 D. 3840
Last Answer : C. 2400
Description : A terminal multiplexer has six 1200 bps terminals and ‘n’ 300 bps terminals connected to it. If the outgoing line is 9600 bps, what is the value of n ? (A) 4 (B) 8 (C) 16 (D) 28
Last Answer : (B) 8
Description : The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is ... to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above
Last Answer : 0.009
Description : In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps
Last Answer : (C) 1000 bps
Description : If delaysare recorded as 10 bit numbers in a 50 router network, and delay vectorsare exchanged twicea second,how muchbandwidth per fill duplex line is occupied by the distributedrouting algorithm? A. 500 bps B. 1500 bps C. 5 bps D. 1000 bps
Last Answer : 1000 bps
Description : How many bits are used to represent Unicode, ASCII, UTF-16, and UTF-8 characters?
Last Answer : Ans. Unicode requires 16 bits and ASCII require 7 bits. Although the ASCII character set uses only 7 bits, it is usually represented as 8 bits. UTF-8 represents characters using 8, 16, and 18 bit patterns. UTF-16 uses 16-bit and larger bit patterns.
Description : The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called a. ASCII b. EBCDIC c. BCD d. All of above
Last Answer : ASCII
Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps
Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps
Description : Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ... ...... (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps
Last Answer : Answer: Marks given to all
Description : If the baudrate is400 for a QPSK signal, thebit rate is ________ bps. A) 100 B) 400 C) 800 D) 1600
Last Answer : 800
Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps
Last Answer : d. 3200 bps
Description : A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? (A) 50 (B) 200 (C) 400 (D) 800
Last Answer : (C) 400 Explanation: 1,00,000 characters = 1,00,000 x 8 bits = 8,00,000 bits 8,00,000 bits/2000 bps = 400 seconds
Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5
Last Answer : b. 2
Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps
Last Answer : b. 2 Mbps
Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes
Last Answer : b. 12,000 bytes
Description : An ASCII is a character-encoding scheme that is employed by personal computers in order to represent various characters, numbers and control keys that the computer user selects on the ... C) American Standard Code for Information Integrity (D) American Standard Code for Isolated Information
Last Answer : (A) American Standard Code for Information Interchange
Description : How many address bits are required to represent 4K memory (A) 5 bits. (B) 12 bits. (C) 8 bits. (D) 10 bits.
Last Answer : (B) 12 bits.
Description : How many address bits are required to represent a 32 K memory (A) 10 bits. (B) 12 bits. (C) 14 bits. (D) 16 bits.
Last Answer : (D) 16 bits.
Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov
Last Answer : 1518
Description : a computer which CPU speed around 100 million instruction per second and with the word length of around 64 bits is known as a. Super computer b. Mini computer c. Micro computer d. Macro computer
Last Answer : Super computer
Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C
Last Answer : B) Baud
Description : Consider a source computer(S) transmitting a file of size 106 bits to a destination computer (D)over a network of two routers (R1 and R2) and three links(L1, L2, and L3). L1connects S to R1; L2 connects R1 to ... file from S to D? a. 1005 ms b. 1010 ms c. 3000 ms d. 3003 ms Answer: Option(a)
Last Answer : a. 1005 ms
Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000
Last Answer : d. 20000
Description : The VPIof an NNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24
Last Answer : 12
Description : The VPIof a UNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24
Last Answer : 8
Description : A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate? A. 3 Kbps B. 6 Kbps C. 12 Kbps D. 24 Kbps
Last Answer : 6 Kbps
Description : In the international standard ASCII encoding, each character needs 7 bits of storage; however, in an ASCII string one byte (8 bits) is usually used for each character. Explain why this is done?
Last Answer : Welcome to ask-public. I don’t want to do your homework for you, but I will get you started. The extra bit is called a parity bit. If you don’t know what that means, you can do some Web searching to learn more. If you are still stuck, I can explain further.
Description : What is the commonly used unit for measuring the speed of data transmission ? (1) Mega Hertz (2) Characters per second (3) Bits per second (4) Nano seconds
Last Answer : Bits per second
Description : If the frequency spectrum of a signal has a bandwidth of500 Hz with thehighest frequency at 600 Hz, what shouldbe the samplingrate, according to the Nyquist theorem? A) 200 samples/s B) 500 samples/s C) 1000 samples/s D) 1200 samples/s
Last Answer : 1200 samples/s
Description : The number of strings of length 4 that are generated by the regular expression (0|∈) 1+2* (3|∈), where | is an alternation character, {+, *} are quantification characters, and ∈ is the null string, is: (A) 08 (B) 10 (C) 11 (D) 12
Last Answer : (D) 12
Description : The number of strings of length 4 that are generated by the regular expression (0+1 +|2+3 + )*, where | is an alternation character and {+, *} are quantification characters, is: (A) 08 (B) 09 (C) 10 (D) 12
Last Answer : (C) 10
Description : A father runs after his son, who is 1000 meters ahead. The father runs at a speed of 1 kilometre every 8 minutes, and the son runs at a speed of 1 kilometer every 12 minutes. How much distance has ... father overtakes him? a) 2500 meters b) 2000 meters c) 1500 meters d) 1000 meters e) 1200 meters
Last Answer : Time taken is same for both father and son Let x be the distance son travelled before being overtaken by his father Time taken by son = x/5 km/hour Time taken by father = (1000 + x) / 7.5 km/hr Since, time taken is same x/5 = (1000 + x) / 7.5 or x = 2000m Answer: b)
Description : A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame
Last Answer : 10,000 B frame
Description : In a four stroke I.C engine completing 3000rpm the natural frequency of vibration of the exhaust valve should be a. 1200 Hz b. 1000 Hz c. 600 Hz d. 120 Hz
Last Answer : b. 1000 Hz
Description : Explain the speed of 9600 bps . ?
Last Answer : 9600 bps Speed is the voice band. 9600 bps means 9600 bits of data is transferred per second . Voice bands typically transfer data up to 9600 bps . This bandwidth is used in telephone lines. This bandwidth is also used to transfer data to computers and peripheral devices.
Description : Processor’s speed of a computer is measured in (1) BPS (2) MIPS (3) Baud (4) Hertz
Last Answer : Million instructions per second (MIPS)