How much tomatoes are required for one kg tomato seeds ?
(a) 50 – 300 kg
(b) 300 — 350 kg(c) 160 — 210 kg
(d) 200 — 250 kg

1 Answer

Answer :

(c) 160 — 210 kg

Related questions

Description : How much tomato average production (q.) may be yield from one hectare ? (A) 100 (B) 105-150 (C) 250 (D) 160-275

Last Answer : (D) 160-275

Description : Match List-I (crops) with List-II (water requirement) and select your answer from the code given below- List-I (a) Jowar (b) Soybean (c) Cotton (d) Groundnut List-II 1. 140 mm - 300 mm 2. 350 mm - 450 mm 3. 200 mm - 300 mm 4. 300 mm - ... (b) (c) (d) (A) 3 1 2 4 (B) 4 2 3 1 (C) 1 4 2 3 (D) 3 1 4 2

Last Answer : (C) 1 4 2 3

Description : Maximum root zone depth for Maize (a) 200-300 mm (b) 400-600 mm (c) 500-600 mm (d) 350- 450 mm

Last Answer : (b) 400-600 mm

Description : Number of meiotic divisions required to produce 200/400 seeds of pea would be (a) 200/400 (b) 400/800 (c) 300/600 (d) 250/500

Last Answer : (d) 250/500.

Description : In organic molecules, fluorescence seldom results from absorption of UV radiation of wavelengths lower than (A) 350 nm (B) 200 nm (C) 300 nm (D) 250 nm

Last Answer : (A) 350 nm

Description : The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300

Last Answer : (B) 1 and 200

Description : Flat rate parcel rates Flat Rate Parcel Boxes size Dimension of boxes (in mm) Weight (in Kg.) Tariff (in Rs.) Small - S 250*50*300 0 to 1 125 Medium - M 250*100*300 Above 1 to 2.5 200 Large - L 300*250*200 Above 2.5 to 5 400

Last Answer : Large - L 300*250*200 Above 2.5 to 5 400

Description : The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Last Answer : Answer: Option D

Description : The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Last Answer : Answer: Option D

Last Answer : Tomato cultivation requires 200 grams of seeds per hectare.

Description : Authorised capital of National Payments Corporation of India (NPCI) is _________ and paid up capital is _______ A. Rs 300 crore and Rs 100 crore B. Rs 350 crore and Rs 50 crore C. Rs 200 crore and Rs 100 crore D. Rs 100 crore and Rs 50 crore

Last Answer : A. Rs 300 crore and Rs 100 crore Explanation: National Payments Corporation of India (NPCI) was incorporated in December 2008 and the Certificate of Commencement of Business was issued in ... dimension and operate on high volume resulting payment services at fraction of the present cost structure.

Description : In a tension test, the yield stress is 300 kg/cm2 , in the octahedral shear stress at the point is: (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm (D) 250 kg/cm2

Last Answer : (A) 100 kg/cm2

Description : Required seed rate for raising tomato nursery is (A) 1000 gm (B) 400 Kg (C) 400 gm (D) 2.0 Kg

Last Answer : (C) 400 gm

Description : What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Last Answer : 250-350 genes

Description : What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Last Answer : .250-350 genes

Description : What is the range of minimum set of genes required for life? A- 50-100 genes B- 250-350 genes C- 1000-1500 genes D- 1500-2000 genes

Last Answer : 250-350 genes

Description : What is the recommended minimum range of illumination required by BS EN 970 for inspection of a welded surface? a) 90 to 125 lux b) 150 to 250 lux c) 350 to 500 lux d) 35 to 50 lux

Last Answer : c) 350 to 500 lux

Description : How much cloves of garlic is required for one hectare (a) 400 kg (b) 500 kg (c) 600 kg (d) 300 kg

Last Answer : (a) 400 kg

Description : X is a working and Y is sleeping partners in a business. X puts in Rs. 2500 and Y puts in Rs.3000. X receives 25/2% of the profit for managing the business and the rest is divided in proportion to their capital. What does Y get out of a profit of Rs. 440? A) 210 B) 200 C) 250 D) 275

Last Answer : Answer: A) Total profit = Rs. 440 X's share for managing the business i.e 25/2 % = {25/ 100}{440/2}=Rs.55 Remaining profit of X and Y as per their capital = 440 - 55= Rs. 385 Ratio of amounts = 2500 : 3000 ... 5}/{11}= Rs.175 X's total share = 175 + 55= Rs. 230 Y's share = 385{6}/{11}=Rs.210

Description : For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of ... C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Last Answer : Answer: Option D

Description : During the night when the F2 layer combines with F1 layer it falls to what approximate height? A. 250 km B. 350 km C. 300 km D. 400 km

Last Answer : C. 300 km

Description : . Molecular weight of petrol may be about (A) 40-60 (B) 100-130 (C) 250-300 (D) 350-400

Last Answer : (B) 100-130

Description : The time taken by Sun to revolve around the center of our galaxy is------? A. 150 million years B. 250 million years (Answer) C. 300 millon years D. 350 millon years

Last Answer : B. 250 million years (Answer)

Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Last Answer : (C) 350-400

Description : India is unique in its characteristics,where over different crops are cultivated in region a) 400. c) 350 b)250 d) 300

Last Answer : 250 

Description : According to IS: 456-2000 Maximum spacing of shear reinforcement in no case shall not exceed [ A ] 250 mm [ B ] 300 mm [ C ] 350 mm [ D ] 450 mm

Last Answer : [ B ] 300 mm

Description : Minimum depth of ballast cushion below the bottom of sleeper at the rail seat on BG group A route should be :- (a) 350 mm. (b) 250 mm. (c) 300 mm.* (d) 325 mm.

Last Answer : (c) 300 mm.*

Description : Weight of one cotton bale is (A)170 Kg (B) 160 Kg (C) 180 Kg (D) 190 Kg

Last Answer : (A)170 Kg

Description : The amount of coproporphyrins excreted per day in feces is about (A) 10–50 µgs (B) 100–150 µgs (C) 200–250 µgs (D) 300–1000 µgs

Last Answer : Answer : D

Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Last Answer : (B) 60-70

Description : Which of the following is correct IPv4 address? a. 124.201.3.1.52 b. 01.200.128.123 c. 300.142.210.64 d. 128.64.0.0

Last Answer : d. 128.64.0.0

Description : Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Last Answer : (A) 600-750

Description : Root formation is promoted in softwood cuttings under light intensity of __________ foot candles: a. 100-150 b. 150-200 c. 200-250 d. 250-350

Last Answer : 150-200

Description : As part of National Climate Change Policy, Indian government is planning to raise the installed capacity of renewable energy by the year 2030 to (A) 175 GW (B) 200 GW (C) 250 GW (D) 350 GW

Last Answer : Answer: D

Description : A small dairy farm daily produces 100 kilograms of average quality buffalo milk and sells it to an organised dairy at the rate of Rs. 100 per kilogram of total solids contained in the milk. How much would be the daily gross ... (D) Between Rs. 1,000 and Rs. 1,100 (E) Between Rs. 1,650 and Rs. 1,850

Last Answer : (B) Between Rs. 1,250 and Rs. 1,400

Description : For spawing of 1 Kg of carp, how much water is required in hatchery (a) 1 m3(b) 10 m3 (c) 50 m3 (d) 80 m3

Last Answer : (a) 1 m3

Description : What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600

Last Answer : (B) 200-300

Description : The cost of 2 kg of apples and 1 kg of grapes on a day was found to be Rs 160. After a month, the cost of 4 kg of apples and 2 kg of grapes is Rs 300. Represent the situation algebraically and geometrically. -Maths 10th

Last Answer : y 20 40 60 80Let the cost of 1 kg of apples be x and that of 1 kg be y So the algebraic representation can be as follows: 2x+y=160 4x+2y=300⇒2x+y=150 The situation can be represented ... that the lines do not intersect anywhere, i.e. they are parallel. Hence we can not arrive at a solution.

Description : The following heat engine produces power of 100,000 kW. The heat engine operates between 800 K and 300 K. It has a thermal efficiency equal to 50% of that of the Carnot engine for the same temperature. The rate at which heat is ... is (A) 100,000 kW (B) 160,000 kW (C) 200,000 kW (D) 320,000 kW

Last Answer : (D) 320,000 kW

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free enD. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. A. 575B. 625 C. 525 D. 550

Last Answer : A. 575

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 3 . Determine the static deflection of the shaft in mm. a) 0.147 b) 0.213 c) 0.132 d) 0.112

Last Answer : a) 0.147

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Last Answer : d) 41

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. a) 575 b) 625 c) 525 d) 550

Last Answer : a) 575

Description : The required DC voltage for arc welding is- (1) 6 to 9 V (2) 50 to 60 V (3) 200 to 250 V (4) 90 to 100 V

Last Answer : (3) 200 to 250 V

Description : Horse latitude lies in between north and south latitudinal belt of equator (A)0 to 50 (B) 30 to 35 (C) 20 to 250 (D) 10 to 15

Last Answer : (B) 30 to 35

Description : The average gestation period in buffalo is of how many days? a) 310 b) 210 c) 400d) 345

Last Answer : a) 310

Description : requires high temperature, light rainfall, 210 frost free days and bright sunshine. a. Jute b. Cotton c. Tea d. Coffee e. Rice

Last Answer : b. Cotton

Description : The average gestation period in buffalo is of how many days?a) 310 b) 210 c) 400 d) 345

Last Answer : a) 310

Description : Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year.  60% 70% 80%  Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production ... activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300

Last Answer : (b) Rs 370,300

Description : Two mail trains Pand Q of 300 m and 600m, run at speed of 130 km/hr and 160 km/hr respectively, in the direction opposite direction to each other. Find the time required to cross each other after the moment they met? A) 11.17 sec B) 12sec C) 9.10sec D) 21sec

Last Answer :  ANSWER:A Explanation:  Length of train P = 300 m  Length of train Q = 600 m  Speed of train p = 130 kmph  Convert km/hr into m/s,  Speed of train p =(130 *5/18)m/s  = 650/18 m/s  = 36.11 m/ ... train B)  = (300+600)m = 900 m We know, time =distance /speed  = 900/ 80.55  = 11.17seconds