In underdamped system, the body will
A. Come to rest in smallest possible time
B. Immediately come to rest
C. Does not come to rest
D. Take finite time to come to rest

1 Answer

Answer :

D. Take finite time to come to rest

Related questions

Description : The advantage of critical damping is A. That vibrating body come to rest in smallest possible time B. There is no vibration C. That amplitude of vibration is maximum D. The amplitude of vibration is minimum

Last Answer : A. That vibrating body come to rest in smallest possible time

Description : The damping factor is the measure of the relative amount of damping in the existing system with that necessary for the ______ system. (A) underdamped (B) overdamped (C) critical damped (D) all of the above

Last Answer : (C) critical damped

Description : If the damping factor for a vibrating system is unity, then the system will be (A) overdamped (B) underdamped (C) critically damped (D) without vibrations

Last Answer : (C) critically damped

Description : For an underdamped harmonic oscillator, resonance ______. (A) occurs when excitation frequency is greater than the undamped natural frequency (B) occurs when excitation frequency is less than the ... ) occurs when excitation frequency is equal to the undamped natural frequency (D) never occurs

Last Answer : (C) occurs when excitation frequency is equal to the undamped natural frequency

Description : What are discrete parameter systems? *1 point (A) Systems which have infinite number of degree of freedom (B) Systems which have finite number of degree of freedom (C) Systems which have no degree of freedom (D) None of the above

Last Answer : (B) Systems which have finite number of degree of freedom

Description : What are discrete parameter systems? A. Systems which have infinite number of degree of freedom B. Systems which have finite number of degree of freedom C. Systems which have no degree of freedom D. None of the above

Last Answer : B. Systems which have finite number of degree of freedom

Description : What are discrete parameter systems?a. Systems which have infinite number of degree of freedom b. Systems which have finite number of degree of freedom c. Systems which have no degree of freedom d. None of the above

Last Answer : b. Systems which have finite number of degree of freedom

Description : If a position servo system does not respond to small changes of the input, is the system overdamped or underdamped?

Last Answer : Overdamped.

Description : If a position servo system tends to oscillate whenever a new position is selected, is the system overdamped or underdamped?

Last Answer : Underdamped

Description : Calculate critical damping coefficient in Ns/m from the following data. mass = 200Kg ω = 20rad/sa) 25,132 b) 26,132 c) 27,132 d) Not possible

Last Answer : d) Not possible

Description : The reciprocal of the interval of time by a vibrating body to complete a cycle is called A Period B Frequency C Resonance D None of the mentioned

Last Answer : B Frequency

Description : When a body moves with simple harmonic motion, the product of its periodic time and frequency is equal to A. Zero B. One C. π/2 D. 2π

Last Answer : B. One

Description : The time period of a simple pendulum does not depend upon the mass of the body suspended at the free end of the string. This statement is known as ___________ . (A) law of gravity (B) law of mass (C) law of isochronism (D) law of length

Last Answer : (B) law of mass

Description : When the body vibrates under the influence of external force, then the body is said to be under ___________ . * 1 point (A) free vibrations (B) natural vibrations (C) forced vibrations (D) damped vibrations

Last Answer : (C) forced vibrations

Description : When a rigid body is suspended vertically and it oscillates with a small amplitude under the action of the force of gravity, the body is known as * 1 point (A) simple pendulum (B) torsional pendulum (C) compound pendulum (D) second’s pendulum

Last Answer : (C) compound pendulum

Description : A seismometer is a device used to measure the ___________ of a vibrating body. (A) displacement (B) velocity (C) acceleration (D) all of the above

Last Answer : (A) displacement

Description : Which of the following instruments measure the amplitude of a vibrating body? (A) Vibrometers (B) Seismometer (C) Both (a) and (b) (D) None of these

Last Answer : (C) Both (a) and (b)

Description : When there is a reduction in amplitude over every cycle of vibration, then the body is said to have A Free vibration B Forced vibration C Damped vibration D None of the mentioned

Last Answer : C Damped vibration

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be A Shear stress B Bending stress C Tensile stress D Compressive stress

Last Answer : B Bending stress

Description : Longitudinal vibrations are said to occur when the particles of a body moves A Perpendicular to its axis B Parallel to its axis C In a circle about its axis D None of the mentioned

Last Answer : B Parallel to its axis

Description : If the mass of body increases A Frequency increases 4 times B Frequency decreases 4 times C Frequency become half D Frequency become double

Last Answer : C Frequency become half

Description : Calculate logarithmic decrement if the amplitude of the vibrating body reduces to half in two cycles A 0.346 B 0.693 C 0.301 D 0.150

Last Answer : A 0.346

Description : If the mass of body increases 4 times A Frequency increases 4 times B Frequency decreases 4 times C Frequency become half D Frequency become double

Last Answer : C Frequency become half

Description : When a rigid body is suspended vertically and it oscillates with a small amplitude under the action of the force of gravity, the body is known as A. simple pendulum B. torsional pendulum C. compound pendulum D. second’s pendulum

Last Answer : C. compound pendulum

Description : Frequency of centrifugal pendulum absorber is always proportional to A) Oscillating motion B) Transfer motion C) Speed of rotating body D) All of the above

Last Answer : C) Speed of rotating body

Description : If the particle of a body vibrate along a circular arc, whose centre lies on the axis of the shaft then the body is said to have A) Transverse vibration B) Longitudinal vibration C) Torsional vibration D) None of the above

Last Answer : C) Torsional vibration

Description : Body having simple harmonic motion is represented by A) x = A sin ωt B) x = A cos ωt C) x = - A sin ωt D) x = - A cos ωt

Last Answer : A) x = A sin ωt

Description : When there is a reduction in amplitude over every cycle of vibration, then the body is said to have ( A ) Free vibration ( B ) Forced vibration ( C ) Damped vibration ( D ) None of the mentioned

Last Answer : ( C ) Damped vibration

Description : When a body is subjected to transverse vibrations, the stress induced in a body B will be (A) Shear stress (B) Bending stress (C) Tensile stress (D)Compressive stress

Last Answer : (B) Bending stress

Description : Longitudinal vibrations are said to occur when the particles of a body moves (A) Perpendicular to its axis B (B) Parallel to its axis (C) In a circle about its axis (D) None of the mentioned

Last Answer : (B) Parallel to its axis

Description : The damping is used to control the __________ of body. A. Force B. Viscosity C. Motion D. None

Last Answer : C. Motion

Description : SHM is the motion in which acceleration of the body is proportional to its displacement and directed towards the mean position. A. True B. False C. Neither True Nor False D. None

Last Answer : A. True

Description : The vibrations of the body with no resistance to its motion known as A. Damped Vibrations B. Undamped Vibrations C. Both D. None

Last Answer : B. Undamped Vibrations

Description : When no external force is acting on the vibrating body, the vibrations are said to be A. Free Vibrations B. Forced Vibrations C. Loaded Vibrations D. Undamped Vibrations

Last Answer : A. Free Vibrations

Description : When the external force is acting on the vibrating body, the vibrations are said to be A. Natural Vibrations B. Forced Vibrations C. Loaded Vibrations D. Undamped Vibrations

Last Answer : B. Forced Vibrations

Description : The instrument that measures the displacement of a vibrating body is called__________ a. seismometer b. transducer c. accelerometer

Last Answer : a. seismometer

Description : The instrument that measures the acceleration of a vibrating body is called___________

Last Answer : Ans- Accelerometer

Description : When there is a reduction in amplitude over every cycle of vibration, then the body is said to have a) free vibration b) forced vibration c) damped vibrationd) under damped vibration

Last Answer : c) damped vibration

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Last Answer : b) bending stress

Description : Which of the following statements is/are true for coulomb damping? 1. Coulomb damping occurs due to friction between two lubricated surfaces2. Damping force is opposite to the direction of motion of vibrating body ... 2, 3 and statement 4 c. Only statement 2 d. All the above statements are true

Last Answer : c. Only statement 2

Description : Determine logarithmic decrement, if the amplitude of a vibrating body reduces to 1/6 th in tw cycles. a. 0.223 b. 0.8958 c. 0.3890 d. None of the above

Last Answer : b. 0.8958

Description : Longitudinal vibrations are said to occur when the particles of a body moves a) perpendicular to its axis b) parallel to its axis c) in a circle about its axis d) none of the mentioned

Last Answer : b) parallel to its axis

Description : In vibrometer, the relative motion between the mass and vibrating body is converted into proportional ________. (A) current (B) voltage (C) resistance (D) ampere

Last Answer : (B) voltage

Description : A seismometer is a device used to measure the ___________ of a vibrating body. (A) displacement (B) velocity (C) acceleration (D) all of the above

Last Answer : (A) displacement

Description : The instruments which are used to measure the ___________ of a vibrating body are called vibration measuring instrument. (A) displacement (B) velocity (C) acceleration (D) all of the above

Last Answer : (D) all of the above

Description : Which of the following instruments measure the amplitude of a vibrating body? (A) Vibrometers (B) Seismometer (C) Both (a) and (b) (D) None of these

Last Answer : (C) Both (a) and (b)

Description : When a rigid body is suspended vertically and it oscillates with a small amplitude under the action of the force of gravity, the body is known as (A) simple pendulum B) torsional pendulum (C) compound pendulum (D) second’s pendulum

Last Answer : (C) compound pendulum

Description : A body of mass 20 kg is suspended from a spring which deflects 20mm under this load. Calculate the frequency of free vibrations in Hz. a) 3.5 b) 5 c) 6 d) 7

Last Answer : a) 3.5

Description : The resistance to the motion of the body is provided by ______ a) Medium of vibration b) Speed of vibration c) Length of the material d) External friction

Last Answer : a) Medium of vibration

Description : When there is a reduction in amplitude over every cycle of vibration, then the body is said to have a) free vibration b) forced vibration c) damped vibration d) under damped vibration

Last Answer : c) damped vibration