The knuckle joint is made up of... A. Cast iron B. stainless Steel C. Teflon D. All of the above

The knuckle joint is made up of...

A. Cast iron

B. stainless Steel

C. Teflon

D. All of the above
by

1 Answer

Answer :

D. All of the above
by

Related questions

100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Last Answer : (C) Aluminium, tin and rubber

Teflon can be used for manufacturing of knuckle joints. A. True B. False

Description : Teflon can be used for manufacturing of knuckle joints. A. True B. False

Last Answer : A. True

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

The diameter of knuckle pin in the knuckle joint is usually... A. 0.5 d B. 0.8 d C. 1.5 d D. d

Description : The diameter of knuckle pin in the knuckle joint is usually... A. 0.5 d B. 0.8 d C. 1.5 d D. d

Last Answer : D. d

To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

The real application of knuckle joint is used to connect three rods - two with forks and a third with the eye. A. True B. False

Description : The real application of knuckle joint is used to connect three rods - two with forks and a third with the eye. A. True B. False

Last Answer : A. True

The knuckle joint is used two joint between the tie bars in roof trusses. A. True B. False

Description : The knuckle joint is used two joint between the tie bars in roof trusses. A. True B. False

Last Answer : A. True

Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False

Description : Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False

Last Answer : A. True

Which of the following are parts of knuckle joint. A. Eye B. Pin C.Fork D. All of the above

Description : Which of the following are parts of knuckle joint. A. Eye B. Pin C.Fork D. All of the above

Last Answer : D. All of the above

Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Maximum rod connecting limit by using knuckle joint is . A. 2 B. 3 C. 4 D. 5

Description : Maximum rod connecting limit by using knuckle joint is . A. 2 B. 3 C. 4 D. 5

Last Answer : B. 3

The knuckle joint is used to connect the... A. Two roads whose Axes are coincide or intersecting and lies in single plane. B. Two roads whose Axes are coincide or intersecting and lies in multiple plane. C. Two roads whose Axes are parallel or intersecting and lies in single plane. D. None of the above

Description : The knuckle joint is used to connect the... A. Two roads whose Axes are coincide or intersecting and lies in single plane. B. Two roads whose Axes are coincide or intersecting and lies in multiple ... Two roads whose Axes are parallel or intersecting and lies in single plane. D. None of the above

Last Answer : A. Two roads whose Axes are coincide or intersecting and lies in single plane.

In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

A knuckle joint can be used in valve mechanism of a reciprocating engine. a) Yes b) No c) Yes but there are stress probles d) No as it is very dangerous to use

Description : A knuckle joint can be used in valve mechanism of a reciprocating engine. a) Yes b) No c) Yes but there are stress probles d) No as it is very dangerous to use

Last Answer : a) Yes

Which of the following are important parts of knuckle joint? a) Eye b) Pin c) Fork d) Each of the mentioned

Description : Which of the following are important parts of knuckle joint? a) Eye b) Pin c) Fork d) Each of the mentioned

Last Answer : d) Each of the mentioned

A knuckle joint is also called socket pin joint. a) True b) False

Description : A knuckle joint is also called socket pin joint. a) True b) False

Last Answer : b) False

A maximum of how many roads may be connected using a knuckle joint? a) 2 b) 3 c) 4 d) 5

Description : A maximum of how many roads may be connected using a knuckle joint? a) 2 b) 3 c) 4 d) 5

Last Answer : b) 3

A knuckle joint is unsuitable for two rotating shafts, which transmit torque a) True b) False

Description : A knuckle joint is unsuitable for two rotating shafts, which transmit torque a) True b) False

Last Answer : a) True

Knuckle Joint can’t be used to connect two intersecting rods. a) Yes b) No, it can’t be used c) It can be used with some modificatios d) It is expensive and hence isn’t used

Description : Knuckle Joint can’t be used to connect two intersecting rods. a) Yes b) No, it can’t be used c) It can be used with some modificatios d) It is expensive and hence isn’t used

Last Answer : b) No, it can’t be used

Flywheel are generally made from (A) Cast Iron (B) High strength steel (C) Ceramics (D) All of the above

Description : Flywheel are generally made from (A) Cast Iron (B) High strength steel (C) Ceramics (D) All of the above

Last Answer : (D) All of the above

Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Last Answer : (A) High silicon iron, Kel-F and Teflon

Which of the following is (are) true? (A) Cast iron has poor tensile strength compared to steel (B) Failure of cast iron flywheel is sudden and total (C) Machinability of cast iron flywheel is poor compared to steel flywheel (D) All of the above

Description : Which of the following is (are) true? (A) Cast iron has poor tensile strength compared to steel (B) Failure of cast iron flywheel is sudden and total (C) Machinability of cast iron flywheel is poor compared to steel flywheel (D) All of the above

Last Answer : (D) All of the above

Maximum shear stress theory is used for (A) Cast iron shafts (B) Steel shafts (C) Flexible shafts (D) Plastic shafts

Description : Maximum shear stress theory is used for (A) Cast iron shafts (B) Steel shafts (C) Flexible shafts (D) Plastic shafts

Last Answer : (B) Steel shafts

Maximum principle stress theory is used for (A) Cast iron shafts (B) Steel shafts (C) Aluminum shafts (D) Plastic shafts

Description : Maximum principle stress theory is used for (A) Cast iron shafts (B) Steel shafts (C) Aluminum shafts (D) Plastic shafts

Last Answer : (A) Cast iron shafts

Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Description : Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Last Answer : (B) Cast iron

The carbonating tower used in Solvay process of soda ash manufactureis made of(A) Cast iron(B) Stainless steel(C) Karbate(D) Lead lined steel

Description : The carbonating tower used in Solvay process of soda ash manufactureis made of (A) Cast iron (B) Stainless steel (C) Karbate (D) Lead lined steel

Last Answer : (A) Cast iron

Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron

Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron

Last Answer : (B) Cast iron

In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Last Answer : (B) Cast iron

Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Description : Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Last Answer : (C) Steel or cement-brick lined

Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Description : Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Last Answer : (A) Steel with top section nickel clad or stainless steel

Water gas generator is made of (A) Carbon steel-brick lined (B) Stainless steel-lead lined (C) Cast iron (D) High carbon steel-porcelain lined

Description : Water gas generator is made of (A) Carbon steel-brick lined (B) Stainless steel-lead lined (C) Cast iron (D) High carbon steel-porcelain lined

Last Answer : (A) Carbon steel-brick lined

Urea autoclave is made of (A) Cast iron (B) Refractory blocks (C) Stainless steel (D) Lead lined steel

Description : Urea autoclave is made of (A) Cast iron (B) Refractory blocks (C) Stainless steel (D) Lead lined steel

Last Answer : (C) Stainless steel

Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel

Description : Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel

Last Answer : (C) Refractory blocks

Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Last Answer : (A) PTFE and porcelain

In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Description : In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Last Answer : (B) Stainless steel

Balls in a ball mill are usually made of (A) Steel (B) Cast iron (C) Stainless steel (D) Bronze

Description : Balls in a ball mill are usually made of (A) Steel (B) Cast iron (C) Stainless steel (D) Bronze

Last Answer : (A) Steel

In a plate type heat exchanger, heat transfer plates are never made of (A) Stainless steel (B) Cast iron (C) Titanium (D) Hastelloy C

Description : In a plate type heat exchanger, heat transfer plates are never made of (A) Stainless steel (B) Cast iron (C) Titanium (D) Hastelloy C

Last Answer : (B) Cast iron

Spray dryer for evaporating milk to produce milk powder is made of (A) Lead lined steel (B) Stainless steel (C) Aluminium (D) Cast iron

Description : Spray dryer for evaporating milk to produce milk powder is made of (A) Lead lined steel (B) Stainless steel (C) Aluminium (D) Cast iron

Last Answer : (B) Stainless steel

Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel

Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel

Last Answer : (C) Karbate

Ball bearings are generally made of (A) Plain carbon steel (B) Chrome carbon steel (C) Stainless steel (D) Malleable cast iron

Description : Ball bearings are generally made of (A) Plain carbon steel (B) Chrome carbon steel (C) Stainless steel (D) Malleable cast iron

Last Answer : (B) Chrome carbon steel

Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Last Answer : (B) Stainless steel or glass lined vessel

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined

Description : Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined

Last Answer : (C) Stainless steel-glass lined

The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Description : The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Last Answer : Option C