Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper
Last Answer : (A) Molybdenum stainless steel
Description : The best material for the core of a transformer is – (1) stainless steel (2) mild steel (3) hard steel (4) soft iron
Last Answer : (4) soft iron Explanation: Iron has a very large magnetic response: it greatly amplifies an applied magnetic field. The transformer's ability to transfer energy depends on the strength of the magnetic ... field is amplified. The input energy can then be lower while still having the same effect.
Description : The best material for the core of a transformer is (1) stainless steel (2) mild steel (3) hard steel (4) soft iron
Last Answer : soft iron
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel
Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon stee
Last Answer : (C) Carbides
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon steel
Last Answer : (A) Mild steel
Description : Which of the following metals is used in the electromagnets? (a) Soft iron (b) Stainless steel (c) Cobalt (d) Copper
Last Answer : Ans:(a)
Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron
Last Answer : (B) Cast iron
Description : Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel
Last Answer : (C) Refractory blocks
Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain
Last Answer : (C) Aluminium, tin and rubber
Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel
Last Answer : (C) Karbate
Description : The digester of a Gobar gas plant is a (A) Mild steel drum (B) Stainless steel vessel (C) Masonry well (D) Cast iron vessel
Last Answer : (C) Masonry well
Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel
Description : Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel (B) 18/8 stainless steel (C) Mild steel (D) High silicon iron (14% Si)
Description : __________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel
Last Answer : Option D
Description : A mould board of MB plough is made of? a Cast iron b Chilled cast iron c Mild steel d Soft centre steel
Last Answer : d Soft centre steel
Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel
Last Answer : a. Soft centre steel
Description : The steel used in R.C.C. work is (A) Stainless steel (B) Mild steel (C) High carbon steel (D) Wrought iron
Last Answer : Answer: Option B
Description : Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)
Last Answer : (C) Reinforced concrete lined with lead
Description : Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper
Last Answer : (B) Stainless steel
Description : The knuckle joint is made up of... A. Cast iron B. stainless Steel C. Teflon D. All of the above
Last Answer : D. All of the above
Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature
Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal
Description : Lead is poured into the joint between two- __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement
Last Answer : (C) Cast iron
Description : Lead is poured into the joint between two __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement
Last Answer : Option C
Description : Gas holder of a gobar (cow-dung) gas plant is made of (A) Molybdenum stainless steel (B) Tin (C) Mild steel (D) Aluminium
Last Answer : (C) Mild steel
Description : In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel
Last Answer : (C) High speed steel
Description : The shafts are made of a. mild steel b. alloy steel c. copper alloys d. cast iron.
Last Answer : d. cast iron.
Description : Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron
Last Answer : D) Wrought iron
Description : Indicate which of the following material does not retain magnetism permanently. (a) Soft iron (b) Stainless steel (e) Hardened steel (d) None of the above
Last Answer : (a) Soft iron
Description : Which of the following is a low melting point metal? (A) Stainless steel (B) Wrought iron (C) Tin (D) Copper
Last Answer : (C) Tin
Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel
Last Answer : (B) Lead
Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility
Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)
Description : The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions
Last Answer : d. Rope and wood
Description : is usually used for brush rockers (a) Mild steel (b) Copper (c) Aluminium (d) Cast-iron
Last Answer : (d) Cast-iron
Description : The substances used in the manufacture of stainless steel are 1. Chromium 2. Iron 3. Copper 4. Steel The correct answers are: (a) 1 and 4 (b) 1, 2, 3 and 4 (c) 2, 3 and 4 (d) 1, 2 and 4
Description : The steel generally used in R.C.C. work, is (A) Stainless (B) Mild steel (C) High carbon steel (D) High tension steel
Description : The steel used for the manufacture of rails, is (A) Bessemer steel (B) Mild steel (C) Cast steel (D) Stainless steel
Last Answer : Answer: Option A
Description : The steel used in steel cored conductors is usually (a) alloy steel (b) stainless steel (c) mild steel (d) high speed steel (e) all of the above
Last Answer : (c) mild steel
Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.
Last Answer : Answer: B
Description : What is an advantage of using a resistance soldering iron when soldering wire to a connector?
Last Answer : The soldering tips are hot only during the brief period of soldering the connection, thus minimizing the chance of burning the wire insulation or connector inserts.
Description : Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass
Last Answer : (B) Copper
Description : Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel
Last Answer : (C) Stainless steel
Description : Heat exchanger tubes are never made of (A) Plain carbon steel (B) Stainless steel (C) Lead (D) Copper
Last Answer : (C) Lead
Description : Earth wire or ground wire is made of: a) copper b) aluminium c) iron d) galvanized steel
Last Answer : Ans: D
Description : Which of the following would be most suitable for making an electromagnet? (a) Copper (b) Tungsten (c) Soft iron (d) Steel
Last Answer : Ans:(c)
Description : State Magneto-striction. Draw Hysteresis loop for : (i) High silicon steel (ii) Copper (iii) Soft iron (iv) Wood
Last Answer : Magneto-striction: It is the change in dimensions of ferro magnetic material when it is magnetized for eg. Silicon steel, iron or any ferromagnetic material. i) Hysteresis loop for High silicon steel : ... loop for Soft iron : iv) Hysteresis loop for Copper and Wood :
Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron
Last Answer : (A) Rubber lined mild steel
Description : Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks
Last Answer : (B) Mild steel