Description : Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood
Last Answer : (C) Steel or cement-brick lined
Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron
Last Answer : (A) Rubber lined mild steel
Description : Hydrochloric acid is stored in a __________vessel. (A) Lead lined steel (B) Rubber lined steel (C) Stainless steel (D) Cast iron
Last Answer : (B) Rubber lined steel
Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel
Last Answer : (B) Lead
Description : The carbonating tower used in Solvay process of soda ash manufactureis made of (A) Cast iron (B) Stainless steel (C) Karbate (D) Lead lined steel
Last Answer : (A) Cast iron
Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain
Last Answer : (C) Aluminium, tin and rubber
Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron
Last Answer : (B) Stainless steel or glass lined vessel
Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium
Last Answer : (A) Stainless steel or glass lined steel
Description : Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined
Last Answer : (C) Stainless steel-glass lined
Description : Water gas generator is made of (A) Carbon steel-brick lined (B) Stainless steel-lead lined (C) Cast iron (D) High carbon steel-porcelain lined
Last Answer : (A) Carbon steel-brick lined
Description : Urea autoclave is made of (A) Cast iron (B) Refractory blocks (C) Stainless steel (D) Lead lined steel
Last Answer : (C) Stainless steel
Description : Spray dryer for evaporating milk to produce milk powder is made of (A) Lead lined steel (B) Stainless steel (C) Aluminium (D) Cast iron
Last Answer : (B) Stainless steel
Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst
Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst
Description : Material of construction of pipe generally used for conveying water in India is (A) Stainless steel (B) Cast iron (C) Wrought iron (D) Lead lined steel
Last Answer : (B) Cast iron
Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid proof bricks
Last Answer : (A) Acidic refractory
Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks
Last Answer : (D) Lead or acid-proof bricks
Description : Hydrochloric acid is stored in a __________ steel vessel. (A) Lead lined (B) Rubber lined (C) Glass lined (D) Stainless
Last Answer : (B) Rubber lined
Description : SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these
Last Answer : (C) Packed steel tower lined with acid proof bricks
Description : Aqueous nitric acid is stored in (A) Steel drum (B) Stainless steel vessel (C) Cast iron vessel lined with acid-proof masonry brick (D) Cast iron vessel
Last Answer : (B) Stainless steel vessel
Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel
Description : In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron
Description : Ammonium chloride solution is stored/ treated in __________ vessels/pipes. (A) Plain carbon steel (B) Stainless steel (C) Rubber or durmet-20 lined (D) Lead
Last Answer : (C) Rubber or durmet-20 lined
Description : Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)
Last Answer : (C) Reinforced concrete lined with lead
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel
Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon
Description : The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain
Last Answer : (B) Glass lined steel
Description : Liners of a ball mill are never made of (A) Lead (B) Alloy steel (C) Rubber or ceramic material (D) Cast iron
Last Answer : (A) Lead
Description : Sulphuric acid pickling tanks are lined with (A) Nickel (B) Rubber (C) Aluminium (D) Glass
Last Answer : (B) Rubber
Description : Rubber lined vessels are corroded by the action of (A) Aqua regia (B) Chloroform (C) Sulphuric acid (95%) (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel
Last Answer : (C) Karbate
Description : Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks
Last Answer : (B) Mild steel
Description : Lead lined equipments & vessels are suitable for handling (A) Hydrochloric acid (10%) (B) Nitric acid (C) Sulphuric acid upto 60°C (D) All (A), (B) and (C)
Last Answer : (C) Sulphuric acid upto 60°C
Description : . Platinum catalyst used in the earlier days of sulphuric acid manufacture by contact process suffers from the drawback like (A) High cost (B) Fragile nature (C) Easy poisoning tendency (D) All (A), (B) and (C)
Description : Double Contact Double Absorption (DCDA) process is the most recent process for the manufacture of (A) Nitric acid (B) Sulphuric acid (C) Ammonium sulphate (D) Hydrochloric acid
Last Answer : (B) Sulphuric acid
Description : Contact process of sulphuric acid manufacture (A) Yields acid of higher concentration than chamber process (B) Yields acids of lower concentration than chamber process (C) Is obsolete (D) Eliminates absorber
Last Answer : (A) Yields acid of higher concentration than chamber process
Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material
Last Answer : (C) Cast iron
Description : The steel used for the manufacture of rails, is (A) Bessemer steel (B) Mild steel (C) Cast steel (D) Stainless steel
Last Answer : Answer: Option A
Description : Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of (A) Bronze (B) Stainless steel (C) Flint or porcelain (D) Concrete
Last Answer : (C) Flint or porcelain
Description : Phenol is not shipped in (A) Nickel lined steel tank cars (B) Galvanised or tin lined drums (C) Boxed glass carboys (D) Cast iron containers
Last Answer : (D) Cast iron containers
Description : Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank
Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron
Description : Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete
Last Answer : (A) Steel with top section nickel clad or stainless steel
Description : Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel
Last Answer : (C) Refractory blocks
Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these
Last Answer : (A) PTFE and porcelain
Description : Balls in a ball mill are usually made of (A) Steel (B) Cast iron (C) Stainless steel (D) Bronze
Last Answer : (A) Steel
Description : In a plate type heat exchanger, heat transfer plates are never made of (A) Stainless steel (B) Cast iron (C) Titanium (D) Hastelloy C
Description : Ball bearings are generally made of (A) Plain carbon steel (B) Chrome carbon steel (C) Stainless steel (D) Malleable cast iron
Last Answer : (B) Chrome carbon steel
Description : The catalyst used in the manufacture of sulphuric acid by contact process is `:
Last Answer : The catalyst used in the manufacture of sulphuric acid by contact process is `: A. `Al_(2)O_(3)` B. `Cr_(2)O_(3)` C. `V_(2)O_(5)` D. `Mn_(3)O_(4)`
Description : The contact process is involved in the manufacture of - (1) Nitric acid (2) Sulphuric acid (3) Ammonia (4) Caustic soda
Last Answer : (2) Sulphuric acid Explanation: It is also a central substance in the chemical industry. It is widely produced by contact process. Now days, sulphuric acid is prepared by contact process all over ... process is based upon the catalytic oxidation of sulfur dioxide (SO2) to sulfur trioxide (SO3).