Name the products obtained when anisole is treated with HI.

Name the products obtained when anisole is treated with HI.
by

1 Answer

Answer :

Ans. Phenol and methyl iodide. 
by

Related questions

What is the main product obtained when vapours of t-butyl alcohol are passed over copper at 300° ?

Description : What is the main product obtained when vapours of t-butyl alcohol are passed over copper at 300° ?

Last Answer : Ans. Isobutylene (2-Methyl propene) 

Ortho and paranitrophenols are more acidic than phanel. Draw the resonance structures of the corresponding phonoxide ion.

Description : Ortho and paranitrophenols are more acidic than phanel. Draw the resonance structures of the corresponding phonoxide ion.

Last Answer : Ans:- Electronwithdrawal by nitro group makes the plenoxide ion more resonance stabilized and so the strength of phenel increases.

Why phenol is acidic ?

Description : Why phenol is acidic ?

Last Answer :  Ans: In phenol dissociation takes place as follows.   The conjugate base of phenol ie. Phenoxide ion is resonance stabilized. This is why the negative charge on oxygen atom is ... ion has less tendency to form undissociated phenol molecule and equilibrium lies towards right direction.  

Why is it that secondary alcohols can only undergo a single oxidation step in contrast to primary alcohols?

Description : Why is it that secondary alcohols can only undergo a single oxidation step in contrast to primary alcohols?

Last Answer : 1. Once the oxidation has reached the ketone stage, (primary alcohols on oxidation yield aldehyde where as secondary alcohols on oxidation yield a ketone), it is impossible to put more oxygen atoms on the relevant carbon atom without rupturing the backbone of the molecule.

Alcohols acts as weak bases. Explain.

Description : Alcohols acts as weak bases. Explain.

Last Answer : The oxygen atom of the hydroxyl group has two lone pairs of electrons. Therefore alcohols accept a proton from strong mineral acid to form oxonium ions. Hence act as weak bases.

Phenols do not undergo substitution of the — OH group like alcohols. Explain.

Description : Phenols do not undergo substitution of the — OH group like alcohols. Explain.

Last Answer : The C — O bond in phenols has some double bond character due to resonance and hence cannot be easily cleaved by a nucleophile. In contrast, the C — O bond in alcohols is a pure single bond and hence can be easily cleaved by a nucleo phile.

Ethers are cleaved by acids not by based. Why ?

Description : Ethers are cleaved by acids not by based. Why ? 

Last Answer : The C - O - C bond in ethers like the C - OH bond in alcohols is quite strong. In order to weaken it, the oxygen atom must be protonated. A subsequent nucleophile attack by a strong ... protonation of O atom of ether and therefore only acids can bring about the cleavage of ethers and not bases.

How an — OH group attached to carbon in the benzene ring activates benzene towards electrophilic substitution ?

Description : How an — OH group attached to carbon in the benzene ring activates benzene towards electrophilic substitution ?

Last Answer : The lone pair of electrons present on oxygen atom enter into resonance with the benzene ring. As a result, the electron density becomes higher at o- and p- position and due to higher electron density, the ring gets activated towards electrophilic substitution.

While separating a mixture of ortho and para-nitro phenols by steam distillation, name the isomer which will be steam volatile. Give reasons.

Description : While separating a mixture of ortho and para-nitro phenols by steam distillation, name the isomer which will be steam volatile. Give reasons.

Last Answer : In o-nitrophenol, there is intramolecular hydrogen bonding as follows : In p-nitrophenol, there is intramolecular hydrogen bonding as follows :   Due to intermolecular H ... -nitrophenol. Hence o-nitraphenol due to its lower b. p. is steam volatile while pnitrophenol is not.

Di-tert butyl ether cannot be made by Williamson’s synthesis. Explain why ?

Description : Di-tert butyl ether cannot be made by Williamson’s synthesis. Explain why ?

Last Answer : Ans. To prepare di tert-butyl ether by Williamson's synthesis, we need tert-butyl bromide and Sodium tertiary butoxide. Since tert-butyl bromide being 3°-alkyl halide prefers to ... rather than substitution, therefore the product obtained is isobutylene rather than ditertiary butyl ether.

Alcohols are easily protonated than phenols. Justify.

Description : Alcohols are easily protonated than phenols. Justify.

Last Answer : Ans. In phenols lone pair of electrons on the oxygen atom are delocalised over the benzene ring due to resonance and hence are not easily available for protonation. In contrast in alcohols, ... oxygen atom are localized due to absence of resonance and hence are easily available for protonation. 

Why are Grignard reagents soluble in ether but not in benzene ?

Description : Why are Grignard reagents soluble in ether but not in benzene ? 

Last Answer : Ans. Grignard reagents from co-ordination complexes with ether but not benzene since the former has lone pair of electrons but the later does not.

Phenol has smaller dipole moment than methanol. (OR) Why are dipole moments of phenols smaller than dipole moments of alcohols ?

Description : Phenol has smaller dipole moment than methanol. (OR) Why are dipole moments of phenols smaller than dipole moments of alcohols ?

Last Answer : Due to electron-withdrawing effect of the benzene ring, the C — O bond in phenol is less polar but in case of methanol due to electron-donating effect of — CH3 group, C — O bond is more polar.

What is usually added to ethyl alcohol to make it unfit for drinking purposes ?

Description : What is usually added to ethyl alcohol to make it unfit for drinking purposes ?

Last Answer : Ans. Methanol and Pyridine. 

Anisole on heating with concentrated HI gives (a) Iodobenzene (b) Phenol + CH3I (c) Iodobenzene + CH3OH (d) Phenol + CH3OH

Description : Anisole on heating with concentrated HI gives (a) Iodobenzene (b) Phenol + CH3I (c) Iodobenzene + CH3OH (d) Phenol + CH3OH

Last Answer : Phenol + CH3I

Anisole is formed when phenol is treated with (a) CH3I/NaOH (b) CH3CH2I/NaOH (c) CHCl3/NaOH (d) Acetic anhydride

Description : Anisole is formed when phenol is treated with (a) CH3I/NaOH (b) CH3CH2I/NaOH (c) CHCl3/NaOH (d) Acetic anhydride

Last Answer : CH3I/NaOH

Which of the following is the strongest acid? (a) Ethanol (b) Phenol (c) Anisole (d) Benzoic acid

Description : Which of the following is the strongest acid? (a) Ethanol (b) Phenol (c) Anisole (d) Benzoic acid

Last Answer : Benzoic acid

Which of the following compounds reacts most rapidly with HNO3/H2SO4? (a) toluene (b) anisole (c) nitrobenzene(d) benzonitrile

Description : Which of the following compounds reacts most rapidly with HNO3/H2SO4? (a) toluene (b) anisole (c) nitrobenzene (d) benzonitrile

Last Answer : anisole

When dipentyl ether is treated with excess HI, through what type of mechanism(s) does the major product result? (a) SN2 (b) SN1 (c) E1(d) E2

Description : When dipentyl ether is treated with excess HI, through what type of mechanism(s) does the major product result? (a) SN2 (b) SN1 (c) E1 (d) E2

Last Answer : SN2

In the following compounds, anisole (I), benzene (II) and nitrobenzene (III), the ease of reaction with electrophiles is:

Description : In the following compounds, anisole (I), benzene (II) and nitrobenzene (III), the ease of reaction with electrophiles is:

Last Answer : In the following compounds, anisole (I), benzene (II) and nitrobenzene (III), the ease of reaction ... . `IIIgtIIgtI` C. `IIgtIgtIII` D. `IgtIIgtIII`

Anisole with conc. `HNO_(3)` and conc. `H_(2)SO_(4)` gives

Description : Anisole with conc. `HNO_(3)` and conc. `H_(2)SO_(4)` gives

Last Answer : Anisole with conc. `HNO_(3)` and conc. `H_(2)SO_(4)` gives A. Phenol B. Nitrobenzene C. O - and - P - Nitroanisole D. O- Nitroanisole

Which reaction does not yield an ester as one of the products?(a) A carboxylic acid is heated with an alcohol (b) A Grignard reagent is added to a carboxylic acid (c) An acid halide is treated with an alcohol (d) An alkyl halide is heated with the salt of a carboxylic acid

Description : Which reaction does not yield an ester as one of the products? (a) A carboxylic acid is heated with an alcohol (b) A Grignard reagent is added to a carboxylic acid (c) An acid halide is treated with an alcohol (d) An alkyl halide is heated with the salt of a carboxylic acid

Last Answer : A Grignard reagent is added to a carboxylic acid

In the reaction `(CH_(3))_(3)C-O-CH_(2)CH_(3)+underset((1"mole"))(HI)overset(heat)(rarr)` the products formed is (are)

Description : In the reaction `(CH_(3))_(3)C-O-CH_(2)CH_(3)+underset((1"mole"))(HI)overset(heat)(rarr)` the products formed is (are)

Last Answer : In the reaction `(CH_(3))_(3)C-O-CH_(2)CH_(3)+underset((1"mole"))(HI)overset(heat)(rarr)` the products ... (H)underset(|)O^(+)-CH_(2)CH_(3)I^(-)`

The product obtained when 4-hydroxybenzene sulphonic acid is treated with an excess of bromine water is

Description : The product obtained when 4-hydroxybenzene sulphonic acid is treated with an excess of bromine water is

Last Answer : The product obtained when 4-hydroxybenzene sulphonic acid is treated with an excess of bromine water ... sulphonic acid D. 2,4,6-tribromophenol

Para toluidine is treated with `HNO_(2)` at ice cold conditions and then boiled with water. The final product obtained is :

Description : Para toluidine is treated with `HNO_(2)` at ice cold conditions and then boiled with water. The final product obtained is :

Last Answer : Para toluidine is treated with `HNO_(2)` at ice cold conditions and then boiled with water. The final ... acid B. p-cresol C. toluic acid D. phenol

When m-chlorobenzaldehyde is treated with `50% KOH` solution, the product (s) obtained is (are)

Description : When m-chlorobenzaldehyde is treated with `50% KOH` solution, the product (s) obtained is (are)

Last Answer : When m-chlorobenzaldehyde is treated with `50% KOH` solution, the product (s) obtained is (are) A. B. C. D.

A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` released a diatomic gas Q. Find the value

Description : A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` released a diatomic gas Q. Find the value

Last Answer : A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` ... x & y are the molar mass of P and Q.

Reddis-brown gas is obtained when the following are treated with conc. `H_(2)SO_(4)` ?

Description : Reddis-brown gas is obtained when the following are treated with conc. `H_(2)SO_(4)` ?

Last Answer : Reddis-brown gas is obtained when the following are treated with conc. `H_(2)SO_(4)` ? A. `Br^(-)` B. `NO_(2)^(-)` C. `NO_(3)^(-)` D. `SO_(3)^(2-)`

Assertion: A white precipitate is obtained when an aq solution of sodium thiosuphate is treated with `AgNO_(3)` solution and if the precipitate is hea

Description : Assertion: A white precipitate is obtained when an aq solution of sodium thiosuphate is treated with `AgNO_(3)` solution and if the precipitate is hea

Last Answer : Assertion: A white precipitate is obtained when an aq solution of sodium thiosuphate is treated with ... I is not correct and Statement-II is correct

Pick up the incorrect statement from the following: (A) The water entering the slow sand filters should be treated by 9.386 coagulants (B) The depth of water on the filter should be twice the depth of the filter sand (C) When the filter head is 0.75 times the depth of filter sand, the water obtained is purest (D) All the above

Description : Pick up the incorrect statement from the following:  (A) The water entering the slow sand filters should be treated by 9.386 coagulants  (B) The depth of water on the filter should be twice the ... is 0.75 times the depth of filter sand, the water obtained is purest  (D) All the above 

Last Answer : (D) All the above 

Which products will be obtained when lead nitrate is heated simply. Write balanced chemical equation for the reaction? State the type of chemical reaction that occur in the change. -Chemistry

Description : Which products will be obtained when lead nitrate is heated simply. Write balanced chemical equation for the reaction? State the type of chemical reaction that occur in the change. -Chemistry

Last Answer : Answer. Lead monoxide, nitrogen dioxide and oxygen gas will be liberated. It is thermal decomposition reaction.

Which of the following products are formed when 1-propanamine is treated with `NaNO_(2)+HCI`?

Description : Which of the following products are formed when 1-propanamine is treated with `NaNO_(2)+HCI`?

Last Answer : Which of the following products are formed when 1-propanamine is treated with `NaNO_(2)+HCI`? A. B. C. D.

Pick up the incorrect statement from the following: A. The mixture of water and waste products, is called sewage B. The treated sewage effluents, are generally used for irrigating the crops C. The process of collecting, treating and disposing off the sewage, is called sewerage D. The old convergence system was definitely better than water carried sewerage system

Description : Pick up the incorrect statement from the following: A. The mixture of water and waste products, is called sewage B. The treated sewage effluents, are generally used for irrigating the ... is called sewerage D. The old convergence system was definitely better than water carried sewerage system

Last Answer : ANS: D

Arrange the following in order of decreasing reactivity towards alkanes. HCl, HBr, HI, HF

Description : Arrange the following in order of decreasing reactivity towards alkanes. HCl, HBr, HI, HF

Last Answer : Ans. HI> HBr> HCl >HF

Use the information and data given below to answer the questions • Stronger intermolecular forces result in higher boiling point • Strength of London forces increases with the number of electrons in the molecule • Boiling point of HF ,HCl, HBr and HI are 293K,189K,206K and 238K respectively (a) Which type of intermolecular forces are present in the molecules HCl, HBr and HI? (b) Looking at the trend of boiling points of HCl, HBr and HI, explain, out of dipole interaction and London interaction, which one predominant here? (c) Why is the boiling point of HF highest while that of HCl lowest?

Description : Use the information and data given below to answer the questions Stronger intermolecular forces result in higher boiling point Strength of London forces increases with the number of electrons in the molecule ... here? (c) Why is the boiling point of HF highest while that of HCl lowest?

Last Answer : Ans :( a) In the molecules HCl, HBr and HI, dipole-dipole interaction and London forces are present. (b) Dipole moment of HCl > HBr > HI but boiling point of HCl < HBr

Diethyl ether reacts with excess of hot concentrated HI to form (a) CH3CH2I + CH3CH2OH (b) Only CH3CH2OH (c) CH3CH2OH + CH2=CH2 (d) Only CH3CH2

Description : Diethyl ether reacts with excess of hot concentrated HI to form (a) CH3CH2I + CH3CH2OH (b) Only CH3CH2OH (c) CH3CH2OH + CH2=CH2 (d) Only CH3CH2

Last Answer : Only CH3CH2

Diethyl ether on heating with excess concentrated HI gives (a) Methyl iodide (b) Isopropyl iodide (c) Ethyl iodide (d) n-Propyl iodide

Description : Diethyl ether on heating with excess concentrated HI gives (a) Methyl iodide (b) Isopropyl iodide (c) Ethyl iodide (d) n-Propyl iodide

Last Answer : Ethyl iodide

Which of the following reagents readily react with ethyl methyl ether? (a) NaOH (b) Conc HI (c) KMnO4 (d) H2O

Description : Which of the following reagents readily react with ethyl methyl ether? (a) NaOH (b) Conc HI (c) KMnO4 (d) H2O

Last Answer : Conc HI

Ethylene reacts with HI to give (a) Iodoethane (b) 2,2-Diiodoethane (c) 1,1-Diiodoethane (d) None of these

Description : Ethylene reacts with HI to give (a) Iodoethane (b) 2,2-Diiodoethane (c) 1,1-Diiodoethane (d) None of these

Last Answer : Iodoethane

Which of the following is the strongest acid? (a) HI (b) H2O (c) CH4 (d) CH3OH

Description : Which of the following is the strongest acid? (a) HI (b) H2O (c) CH4 (d) CH3OH

Last Answer : HI

Which of the following compounds has the highest boiling point? w) CH4 x) CCL4 y) HI z) IF5

Description : Which of the following compounds has the highest boiling point? w) CH4 x) CCL4 y) HI z) IF5

Last Answer : ANSWER: Z -- IF5

Name four products other than edible oil which are obtained from oilseeds grown in India. -SST 10th

Description : Name four products other than edible oil which are obtained from oilseeds grown in India. -SST 10th

Last Answer : (i) Soaps, (ii) Medicines, (iii) Cattle feed, (iv) Perfumes.

`CH_(3)CH_(2)CH_(2)CONH_(2)` is boiled with aqueous NaOH, then the reaction mixture is acidified with HCl. The products obtained are

Description : `CH_(3)CH_(2)CH_(2)CONH_(2)` is boiled with aqueous NaOH, then the reaction mixture is acidified with HCl. The products obtained are

Last Answer : `CH_(3)CH_(2)CH_(2)CONH_(2)` is boiled with aqueous NaOH, then the reaction mixture is acidified with HCl. The ... CH_(3)CH_(2)CH_(2)COO^(-)+NH_(4)Cl`

`CH_(3)CH_(2)CH_(2)CONH_(2)` is boiled with aqueous NaOH, then the reaction mixture is acidified with HCl. The products obtained are

Description : `CH_(3)CH_(2)CH_(2)CONH_(2)` is boiled with aqueous NaOH, then the reaction mixture is acidified with HCl. The products obtained are

Last Answer : `CH_(3)CH_(2)CH_(2)CONH_(2)` is boiled with aqueous NaOH, then the reaction mixture is acidified with HCl. The ... CH_(3)CH_(2)CH_(2)COO^(-)+NH_(4)Cl`

When chlorine reacts with cold and dilute solution of sodium hydroxide, the products obtained are

Description : When chlorine reacts with cold and dilute solution of sodium hydroxide, the products obtained are

Last Answer : When chlorine reacts with cold and dilute solution of sodium hydroxide, the products obtained are A. (1) `ClO_2^ ... ClO_2^-` D. `ClO^-` and `ClO_3^-`

The products obtained on heating `LiNO_(3)` will be

Description : The products obtained on heating `LiNO_(3)` will be

Last Answer : The products obtained on heating `LiNO_(3)` will be A. `LiNO_(2)+O_(2)` B. `Li_(2)O+NO_(2)+O_(2)` C. `Li_(3)N+O_(2)` D. `Li_(2)O+OH^(-)+O_(2)`

Delicious chilgoza seeds, commercially important products such as turpentine and resin and the drug ephedrine, useful in asthma and other respiratory ailments, are all obtained from plants that are (a) Ferns (b) Algae (c) Monocotyledons and dicotyledons (d) Gymnosperms

Description : Delicious chilgoza seeds, commercially important products such as turpentine and resin and the drug ephedrine, useful in asthma and other respiratory ailments, are all obtained from plants that are (a) Ferns (b) Algae (c) Monocotyledons and dicotyledons (d) Gymnosperms

Last Answer : Ans:(d)

Which of the following is one of the commercial products obtained from Gelidium and Gracilaria and are used to grow microbes and in preparations of icecreams and jellies? (1) Agar (2) Chlorella (3) Spirullina (4) Gymnosperms

Description : Which of the following is one of the commercial products obtained from Gelidium and Gracilaria and are used to grow microbes and in preparations of icecreams and jellies? (1) Agar (2) Chlorella (3) Spirullina (4) Gymnosperms

Last Answer : (1) Agar Explanation: Agar, one of the commercial products obtained from Gelidium and Gracilaria are used to grow microbes and in preparations of ice-creams and jellies.

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

The energy obtained from plant and plant products is called

Description : The energy obtained from plant and plant products is called

Last Answer : bio energy.