Diamagnetic materials are magnetised (A) Strongly (B) Only slightly (C) With eddy currents only (D) In a direction opposite to that of the applied field

Diamagnetic materials are magnetised
(A) Strongly
(B) Only slightly
(C) With eddy currents only
(D) In a direction opposite to that of the applied field
by

1 Answer

Answer :

(D) In a direction opposite to that of the applied field
by

Related questions

Diamagnetic materials (A) Are magnetised by eddy currents only (B) Are non-magnetic and cannot be magnetised (C) Are magnetised in direction opposite to the magnetic field (D) Can be magnetised in one direction only

Description : Diamagnetic materials (A) Are magnetised by eddy currents only (B) Are non-magnetic and cannot be magnetised (C) Are magnetised in direction opposite to the magnetic field (D) Can be magnetised in one direction only

Last Answer : (C) Are magnetised in direction opposite to the magnetic field

Brush sparking during commutation may be caused by ________. A. eddy currents in the armature core B. laminations in the generator field pieces C. induced current opposite to coil inductance D. coil inductance discharge occurring at commutation

Description : Brush sparking during commutation may be caused by ________. A. eddy currents in the armature core B. laminations in the generator field pieces C. induced current opposite to coil inductance D. coil inductance discharge occurring at commutation

Last Answer : Answer: D

A material which is slightly repelled by a magnetic field is known as (a) ferromagnetic material (b) diamagnetic material (c) paramagnetic material (d) conducting material

Description : A material which is slightly repelled by a magnetic field is known as (a) ferromagnetic material (b) diamagnetic material (c) paramagnetic material (d) conducting material

Last Answer : (b) diamagnetic material

Reversing the current flow through a coil will ___________. A. reduce the amount of flux produced B. have no effect on the eddy currents produced C. reduce the power consumed D. reverse its two-pole field

Description : Reversing the current flow through a coil will ___________. A. reduce the amount of flux produced B. have no effect on the eddy currents produced C. reduce the power consumed D. reverse its two-pole field

Last Answer : Answer: D

If overloading a DC machine becomes necessary in an emergency, you should ____________. A. cool the machine with portable blowers and fans B. hold thermal overload relays open with blocks of wood C. inject small amounts of CO2 into the windings for cooling D. increase the residual magnetism value of windings to reduce eddy currents

Description : If overloading a DC machine becomes necessary in an emergency, you should ____________. A. cool the machine with portable blowers and fans B. hold thermal overload relays open with blocks of ... the windings for cooling D. increase the residual magnetism value of windings to reduce eddy currents

Last Answer : Answer: A

Transformer cores are laminated to reduce _____________. A. eddy currents B. secondary flux C. leakage flux D. all of the above

Description : Transformer cores are laminated to reduce _____________. A. eddy currents B. secondary flux C. leakage flux D. all of the above

Last Answer : Answer: A

On tank vessels with an electrically-driven capstan, the motor should be meggered periodically to test _____________. A. insulation resistance B. eddy currents C. capacitance D. armature reactance

Description : On tank vessels with an electrically-driven capstan, the motor should be meggered periodically to test _____________. A. insulation resistance B. eddy currents C. capacitance D. armature reactance

Last Answer : Answer: A

Currents that flow in circles inside a disc are known as A. eddy currents B. circular currents C. air currents D. alternating curent

Description : Currents that flow in circles inside a disc are known as A. eddy currents B. circular currents C. air currents D. alternating curent

Last Answer : eddy currents

69 In case there are burrs on the edges of the laminations of the transformer, it is likely to result in A. Vibrations B. Noise C. Higher eddy currents loss D. Higher hysteresis loss

Description : 69 In case there are burrs on the edges of the laminations of the transformer, it is likely to result in A. Vibrations B. Noise C. Higher eddy currents loss D. Higher hysteresis loss

Last Answer : C. Higher eddy currents loss

Eddy currents are induced in the pole shoes of a D.C. machine due to?

Description : Eddy currents are induced in the pole shoes of a D.C. machine due to?

Last Answer : Eddy currents are induced in the pole shoes of a D.C. machine due to relative rotation between field and armature.

(2) experience collision less frequently Explanation: When an electric field is applied, both the valence electrons and the free electrons move in the same direction. The hole direction is opposite to that of valence electron but the mobility is the same. Even for the same electric field, valence electrons cannot move as freely as the free electrons because its movement is restricted due to collisions. Therefore, the velocity of valence electrons is less compared to free electrons. In other words, the velocity of holes is less compared to free electrons. This means mobility is also less for a hole compared to free electron.

Description : (2) experience collision less frequently Explanation: When an electric field is applied, both the valence electrons and the free electrons move in the same direction. The hole direction is opposite to that ... to free electrons. This means mobility is also less for a hole compared to free electron.

Last Answer : Carbon dioxide is called a greenhouse gas because - (1) its concentration remains always higher than other gases (2) it is used in photosynthesis (3) it absorbs infrared radiation (4) it emits visible radiation

A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor magnets to lock in with the rotating flux of the stator C. the stator poles are dragged around due to the flux created by the excitation current D. the stator flux rotates in the opposite direction

Description : A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor ... the flux created by the excitation current D. the stator flux rotates in the opposite direction

Last Answer : Answer: B

If an electric field is applied to a colloidal sol, the dispersed phase particles are found to move towards the electrode of opposite charge. If however, the dispersed phase is made stationary, the dispersion medium is found to move in the opposite direction. What is the term used for such movement of dispersion medium ?

Description : If an electric field is applied to a colloidal sol, the dispersed phase particles are found to move towards the electrode of opposite charge. If however, the dispersed phase is made stationary, the ... move in the opposite direction. What is the term used for such movement of dispersion medium ?

Last Answer : Ans. Electro osmosis. 

Three coils are placed infront of each other as shown currents in 1 and 2 are in same direction while that in 3 is in opposite direction. Match the fo

Description : Three coils are placed infront of each other as shown currents in 1 and 2 are in same direction while that in 3 is in opposite direction. Match the fo

Last Answer : Three coils are placed infront of each other as shown currents in 1 and 2 are in same ... 3 is in opposite direction. Match the following table

In the process of magnetisation of a bar (1) The entire bulk of the bar gets magnetised (2) Only the surface of the bar gets magnetised (3) Only the ends of the bar get magnetised (4) Only some parts of the outer layers of the bar get magnetised

Description : In the process of magnetisation of a bar (1) The entire bulk of the bar gets magnetised (2) Only the surface of the bar gets magnetised (3) Only the ends of the bar get magnetised (4) Only some parts of the outer layers of the bar get magnetised

Last Answer : The entire bulk of the bar gets magnetised

The temperature at which ferromagnetic material can no longer be magnetised by the outside forces, is termed as the (A) Critical point (B) Curie temperature (C) Inversion temperature (D) Eutectic temperature

Description : The temperature at which ferromagnetic material can no longer be magnetised by the outside forces, is termed as the (A) Critical point (B) Curie temperature (C) Inversion temperature (D) Eutectic temperature

Last Answer : (B) Curie temperature

What are the properties of diamagnetic materials ?

Description : What are the properties of diamagnetic materials ?

Last Answer : 1. They are repelled by magnets. 2. They are solid , liquid and pliable. 3. They have no religion of magnetic gravity. 4. They have no point. 5. Their magnetism or tendency is negative. . They have no hysteria. . Their magnetic penetration is u

The materials having very small susceptibility at all temperatures are a) Antiferromagnetic b) Diamagnetic c) Ferromagnetic d) Paramagnetic

Description : The materials having very small susceptibility at all temperatures are a) Antiferromagnetic b) Diamagnetic c) Ferromagnetic d) Paramagnetic

Last Answer : a) Antiferromagnetic

In which materials the magnetic anisotropy is followed? a) Diamagnetic b) Paramagnetic c) Ferromagnetic d) Ferromagnetic

Description : In which materials the magnetic anisotropy is followed? a) Diamagnetic b) Paramagnetic c) Ferromagnetic d) Ferromagnetic

Last Answer : c) Ferromagnetic

The relative permeability is less than unity is case of (a) ferromagnetic materials (b) ferrites (c) non-ferrous materials (d) diamagnetic materials

Description : The relative permeability is less than unity is case of (a) ferromagnetic materials (b) ferrites (c) non-ferrous materials (d) diamagnetic materials

Last Answer : (d) diamagnetic materials

Ferrites are materials. (a) paramagnetic (b) diamagnetic (c) ferromagnetic (d) none of the above

Description : Ferrites are materials. (a) paramagnetic (b) diamagnetic (c) ferromagnetic (d) none of the above

Last Answer : (c) ferromagnetic

Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Description : Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Last Answer : (A) ferromagnetic material.

Two parallel long wires carry currents `i_(1) "and" i_(2)` with `i_(1) gt i_(2)`.When the currents are in the same direction then the magnetic field m

Description : Two parallel long wires carry currents `i_(1) "and" i_(2)` with `i_(1) gt i_(2)`.When the currents are in the same direction then the magnetic field m

Last Answer : Two parallel long wires carry currents `i_(1) "and" i_(2)` with `i_(1) gt i_(2)`.When the currents are in the same ... 4` B. `5:3` C. `7:11` D. `11:7`

In a coaxial, straight cable, the central conductor and the outer conductor carry equal currents in opposite directions. The magnetic field is zero.

Description : In a coaxial, straight cable, the central conductor and the outer conductor carry equal currents in opposite directions. The magnetic field is zero.

Last Answer : In a coaxial, straight cable, the central conductor and the outer conductor carry equal currents ... outer conductor D. in between the two conductors

Which of the following input device is used in Banks to read magnetised characters on a Cheque? A. OCR B. MICR C. Bar Code reader D. Magnetic Stripe reader

Description : Which of the following input device is used in Banks to read magnetised characters on a Cheque? A. OCR B. MICR C. Bar Code reader D. Magnetic Stripe reader

Last Answer : B. MICR

A transformer at 25 Hz develops 20 W hysteresis loss and 50 W eddy current loss. If the applied voltage and

Description : A transformer at 25 Hz develops 20 W hysteresis loss and 50 W eddy current loss. If the applied voltage and frequency are doubled, the new core losses are (A) 140 W (B) 180 W (C) 240 W (D) 480 W

Last Answer : A transformer at 25 Hz develops 20 W hysteresis loss and 50 W eddy current loss. If the applied voltage and frequency are doubled, the new core losses are 240 W

The magnetic field which destroys the superconductivity is called a) Diamagnetic field b) Ferromagnetic field c) Ferrimagnetic field d) Critical field

Description : The magnetic field which destroys the superconductivity is called a) Diamagnetic field b) Ferromagnetic field c) Ferrimagnetic field d) Critical field

Last Answer : d) Critical field

The induced current in transformer which produced in the direction perpendicular to flux, is known as: a. Conventional current b. electronic current c. Perpendicular current d. Eddy current

Description : The induced current in transformer which produced in the direction perpendicular to flux, is known as: a. Conventional current b. electronic current c. Perpendicular current d. Eddy current

Last Answer : c. Perpendicular current

Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share

Why four magnetic materials are strongly attracted to the magnet?

Description : Why four magnetic materials are strongly attracted to the magnet?

Last Answer : This is related to the materials having magnetic domains.

1. Which of light are strongly absorbed by plants? 2. ‘Higher than Hopes’ is a biography of which author? 3. How many languages are used on a ten rupee note? 4. Which are the materials that come out of a volcano at the time of eruption? 5. Which ruler from Central Asia conquered North India in 1192?

Description : 1. Which of light are strongly absorbed by plants? 2. Higher than Hopes' is a biography of which author? 3. How many languages are used on a ten rupee note? 4. Which are the materials that ... country? 19. Which is the World's longest river? 20. In which two seets was Jainism divided into?

Last Answer : Answer : 1. Blue and red 2. Nelson Mandela 3. 15 4. Solid, liquid, gaseous 5. Shihabuddin Muhammad Gori 6. Fumaric acid 7. Advocate General 8. Vitamin D 9. Andes 10. Amir Khusarau 11. ... 16. The Council of Ministers 17. Bernoulli's principle 18. Madhya Pradesh 19. Nile 20. Svetambara and Digambara

If the force applied on the body displaces it in the opposite direction of applied force, then the work done is : -Science

Description : If the force applied on the body displaces it in the opposite direction of applied force, then the work done is : -Science

Last Answer : Work can be either positive or negative: if the force has a component in the same direction as the displacement of the object, the force is doing positive work. If the force has a component in the direction opposite to the displacement, the force does negative work.

As shown in the illustration, the direction of electron flow through the component is _______. EL-0079 A. from terminal 'B' to terminal 'A' B. from terminal 'A' to terminal 'B' C. determined by the polarity of the applied voltage D. opposite from that in a resistor

Description : As shown in the illustration, the direction of electron flow through the component is _______. EL-0079 A. from terminal 'B' to terminal 'A' B. from terminal 'A' to terminal 'B' C. determined by the polarity of the applied voltage D. opposite from that in a resistor

Last Answer : Answer: B

When heavy rotating masses are connected by a shaft and equal and opposite torques are applied to these masses (rotors) A. The rotors vibrate torsionally in the same direction. B. The rotors vibrate torsionally in the opposite direction. C. There is one point on the axis of shaft which remains undisturbed by vibration. D. Both (B) and (C)

Description : When heavy rotating masses are connected by a shaft and equal and opposite torques are applied to these masses (rotors) A. The rotors vibrate torsionally in the same direction. B. The rotors vibrate torsionally ... on the axis of shaft which remains undisturbed by vibration. D. Both (B) and (C)

Last Answer : D. Both (B) and (C)

Assertion Two infinitely long wires `A` and `B` carry unequal currents both in inward direction. Then, there is only point (excluding the ponts at inf

Description : Assertion Two infinitely long wires `A` and `B` carry unequal currents both in inward direction. Then, there is only point (excluding the ponts at inf

Last Answer : Assertion Two infinitely long wires `A` and `B` carry unequal currents both in inward direction. Then ... . If Assertion is false but Reason is true.

When a megohmmeter is being used to test insulation resistance, current leakage along the surface of the insulation is indicated by the megohmmeter pointer _____________. A. fluctuating around a constant resistance reading B. dipping towards 'zero', then rising slowly C. kicking slightly downscale as voltage is applied D. continually rising as the test voltage is applied

Description : When a megohmmeter is being used to test insulation resistance, current leakage along the surface of the insulation is indicated by the megohmmeter pointer _____________. A. fluctuating around a ... slightly downscale as voltage is applied D. continually rising as the test voltage is applied

Last Answer : Answer: C

When a megohmmeter is being used to test insulation resistance, current leakage along the surface of the insulation is indicated by the megohmmeter's pointer _____________. A. dipping toward zero then raising slowly B. continually rising as test voltage is applied C. kicking slightly down scale as voltage is applied D. fluctuating around a constant resistance reading

Description : When a megohmmeter is being used to test insulation resistance, current leakage along the surface of the insulation is indicated by the megohmmeter's pointer _____________. A. dipping toward ... kicking slightly down scale as voltage is applied D. fluctuating around a constant resistance reading

Last Answer : Answer: C

The ability of materials to become polarized under an applied electric field is called _______

Description : The ability of materials to become polarized under an applied electric field is called _______ A) Ferroelectricity B) Paraelectricity C) Polectricity D) None of these

Last Answer : The ability of materials to become polarized under an applied electric field is called Paraelectricity

A circular loop which is in the form of a major arc of a constant magnetic field B is applied in the vertical direction such that the magnetic lines o

Description : A circular loop which is in the form of a major arc of a constant magnetic field B is applied in the vertical direction such that the magnetic lines o

Last Answer : A circular loop which is in the form of a major arc of a constant magnetic field B is applied in the ... `2 BIR sin(alpha//2)` D. None of these

As an armature revolves within a magnetic field, friction is developed between the rotated magnetized particles as they pass through each magnetization cycle. This results in ____________. A. copper loss B. eddy-current loss C. hysteresis loss D. armature reaction

Description : As an armature revolves within a magnetic field, friction is developed between the rotated magnetized particles as they pass through each magnetization cycle. This results in ____________. A. copper loss B. eddy-current loss C. hysteresis loss D. armature reaction

Last Answer : Answer: C

Paramagnetic materials have relative permeability (a) slightly less than unity (b) equal to unity (c) slightly more than unity (d) equal to that ferromagnetic mate rials

Description : Paramagnetic materials have relative permeability (a) slightly less than unity (b) equal to unity (c) slightly more than unity (d) equal to that ferromagnetic mate rials

Last Answer : (c) slightly more than unity

Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than the original impression C. The strength of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Description : Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than ... of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Last Answer : A. They lack accurate reproduction of surface details

What is happening When light passes through a transparent material it's direction is visually changed slightly?

Description : What is happening When light passes through a transparent material it's direction is visually changed slightly?

Last Answer : That is called "refraction", and it is related to the fact thatlight travels slower in some materials than in others.

Nickel is a __________ material. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Description : Nickel is a __________ material. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Last Answer : (A) Ferromagnetic

A magnetic material becomes __________ above the Curie temperature. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Description : A magnetic material becomes __________ above the Curie temperature. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Last Answer : (C) Paramagnetic

Nickel as a material of construction (A) Is used as an alloying element for both ferrous & non-ferrous alloys (B) Is paramagnetic below 415° C (its Curie temperature) (C) Diamagnetic (D) Has a body centred cubic (bcc) crystal lattice structure

Description : Nickel as a material of construction (A) Is used as an alloying element for both ferrous & non-ferrous alloys (B) Is paramagnetic below 415° C (its Curie temperature) (C) Diamagnetic (D) Has a body centred cubic (bcc) crystal lattice structure

Last Answer : (A) Is used as an alloying element for both ferrous & non-ferrous alloys

Quartz is a __________ material. (A) Diamagnetic (B) Ferromagnetic (C) Ferroelectric (D) Piezoelectric

Description : Quartz is a __________ material. (A) Diamagnetic (B) Ferromagnetic (C) Ferroelectric (D) Piezoelectric

Last Answer : Option D

Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Description : Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Last Answer : Option B

The direction of ocean currents is reversed with season in which ocean? -Do You Know?

Description : The direction of ocean currents is reversed with season in which ocean? -Do You Know?

Last Answer : answer: