Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron

Which of the following has the least carbon percentage?
(A) Low carbon steel
(B) Mild steel
(C) Wrought iron
(D) White cast iron
by

1 Answer

Answer :

(C) Wrought iron
by

Related questions

Carbon percentage is the same in cast iron and (A) Wrought iron(B) Pig iron(C) Mild steel(D) High silicon (14%) iron

Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron

Last Answer : (B) Pig iron

Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel

Description : Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel

Last Answer : (B) Pig iron

Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron

Description : Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron

Last Answer : D) Wrought iron

Which one contains the least percentage of carbon?(A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Description : Which one contains the least percentage of carbon? (A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Last Answer : (A) Wrought iron

Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel

Description : Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel

Last Answer : (D) High carbon steel

Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel

Description : Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel

Last Answer : Answer: Option B

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Last Answer : (C) Cast iron

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Last Answer : Option B

Which of the following has the poorest weldability? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) High-carbon steel

Description : Which of the following has the poorest weldability? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) High-carbon steel

Last Answer : (D) High-carbon steel

Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : (1) Cast iron Explanation: Cast Iron is a hard, brittle, nonmalleable iron-carbon alloy, cast into shape, containing 2 to 4.5 percent carbon. Steels contain less than 2% and usually less than 1% carbon, ... percent carbon. Wrought iron is an iron alloy with very low carbon (0.04 to 0.08%) content.

Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : Cast iron

An alloy of iron containing 4% carbon is called (A) High carbon steel (B) Wrought iron (C) Mild steel (D) None of these

Description : An alloy of iron containing 4% carbon is called (A) High carbon steel (B) Wrought iron (C) Mild steel (D) None of these

Last Answer : (D) None of these

Which of the following will have the highest melting point? (A) Pig iron (B) Mild steel (C) Wrought iron (D) High carbon stee

Description : Which of the following will have the highest melting point? (A) Pig iron (B) Mild steel (C) Wrought iron (D) High carbon stee

Last Answer : (C) Wrought iron

The shovel of seed drill is made up of: A. Cast iron B. Mild steel C. White metal D. Carbon steel

Description : The shovel of seed drill is made up of: A. Cast iron B. Mild steel C. White metal D. Carbon steel

Last Answer : Carbon steel

The steel used in R.C.C. work is (A) Stainless steel (B) Mild steel (C) High carbon steel (D) Wrought iron

Description : The steel used in R.C.C. work is (A) Stainless steel (B) Mild steel (C) High carbon steel (D) Wrought iron

Last Answer : Answer: Option B

In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Description : In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Last Answer : (B) Stainless steel

Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Last Answer : (C) Mild steel

Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Last Answer : Option C

__________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel

Description : __________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel

Last Answer : Option D

Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel

Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel

Last Answer : a. Soft centre steel

Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Last Answer : (D) Plain carbon

Which of the following is the easiest to bend? (A) Steel (B) Stainless steel (C) Cast iron (D) Wrought iron

Description : Which of the following is the easiest to bend? (A) Steel (B) Stainless steel (C) Cast iron (D) Wrought iron

Last Answer : (D) Wrought iron

Which has the maximum melting point out of the following? (A) Steel (B) Cast iron (C) Stainless steel (D) Wrought iron

Description : Which has the maximum melting point out of the following? (A) Steel (B) Cast iron (C) Stainless steel (D) Wrought iron

Last Answer : (D) Wrought iron

Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Last Answer : (B) Stainless steel or glass lined vessel

Which of the following undergoes granular fracture? (A) Wrought iron (B) Steel (C) Cast iron (D) None of these

Description : Which of the following undergoes granular fracture? (A) Wrought iron (B) Steel (C) Cast iron (D) None of these

Last Answer : (B) Steel

Material of construction of pipe generally used for conveying water in India is (A) Stainless steel (B) Cast iron (C) Wrought iron (D) Lead lined steel

Description : Material of construction of pipe generally used for conveying water in India is (A) Stainless steel (B) Cast iron (C) Wrought iron (D) Lead lined steel

Last Answer : (B) Cast iron

Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)

Description : Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)

Last Answer : Answer: Option D

Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Description : Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Last Answer : (B) Wrought iron cannot be easily forged and welded

Cupola produces __________ iron. (A) Pig (B) Cast (C) Wrought (D) Carbon free

Description : Cupola produces __________ iron. (A) Pig (B) Cast (C) Wrought (D) Carbon free

Last Answer : (B) Cast

__________ iron is produced, when molten pig iron is chilled suddenly. (A) White cast (B) Grey cast (C) Wrought (D) None of these

Description : __________ iron is produced, when molten pig iron is chilled suddenly. (A) White cast (B) Grey cast (C) Wrought (D) None of these

Last Answer : (A) White cast

__________ iron is produced, when molten pig iron is allowed to cool gradually. (A) White cast (B) Grey cast (C) Wrought (D) None of these

Description : __________ iron is produced, when molten pig iron is allowed to cool gradually. (A) White cast (B) Grey cast (C) Wrought (D) None of these

Last Answer : (B) Grey cast

Out of the following __________ iron has the best capability to bear sudden & excessive shocks. (A) White (B) Cast (C) Wrought (D) Pig

Description : Out of the following __________ iron has the best capability to bear sudden & excessive shocks. (A) White (B) Cast (C) Wrought (D) Pig

Last Answer : (C) Wrought

Alloy steel containing chromium to resist rusting is known as (a) wrought iron (b) cast iron (c) hard steel (d) stainless steel

Description : Alloy steel containing chromium to resist rusting is known as (a) wrought iron (b) cast iron (c) hard steel (d) stainless steel

Last Answer : Ans:(d)

Alloy steel containing chromium, to resist rusting, is known as (a) Wrought iron (b) Cast iron (c) Hard steel (d) Stainless steel

Description : Alloy steel containing chromium, to resist rusting, is known as (a) Wrought iron (b) Cast iron (c) Hard steel (d) Stainless steel

Last Answer : Ans:(d)

The purest form of Iron is : (1) Cast iron (2) Steel (3) Pig iron (4) Wrought iron

Description : The purest form of Iron is : (1) Cast iron (2) Steel (3) Pig iron (4) Wrought iron

Last Answer : (4) Wrought iron Explanation: Wrought iron is an iron alloy with a very low carbon content in Contrast to steel, and has fibrous inclusions, known as slag. This is what gives it a " ... qualifies because current standards for commercially pure iron require a carbon content of less than 0.008 wt%.

Which is the purest form of iron? (1) Steel (2) Cast iron (3) Pig iron (4) Wrought iron

Description : Which is the purest form of iron? (1) Steel (2) Cast iron (3) Pig iron (4) Wrought iron

Last Answer : (4) Wrought iron Explanation: Iron is a chemical element with the symbol Fe and atomic number 26. It is a metal in the first transition series. It is the most common element (by mass) forming the ... the Earth's crust. Wrought iron is the purest form of iron. It contains less than 0.25% carbon.

A ferrous metal is (A) Cast iron (B) Wrought iron (C) Steel (D) All the above

Description : A ferrous metal is (A) Cast iron (B) Wrought iron (C) Steel (D) All the above

Last Answer : Answer: Option D

Bessemer process is used for the manufacture of (A) Pig iron (B) Cast iron (C) Wrought iron D) Steel

Description : Bessemer process is used for the manufacture of (A) Pig iron (B) Cast iron (C) Wrought iron D) Steel

Last Answer : Answer: Option D

Depending on the chemical composition and mechanical properties, iron may be classified as (A) Cast iron (B) Wrought iron (C) Steel (D) All the above

Description : Depending on the chemical composition and mechanical properties, iron may be classified as (A) Cast iron (B) Wrought iron (C) Steel (D) All the above

Last Answer : Answer: Option D

The purest form of Iron is : (1) Cast iron (2) Steel (3) Pig iron (4) Wrought iron

Description : The purest form of Iron is : (1) Cast iron (2) Steel (3) Pig iron (4) Wrought iron

Last Answer : Wrought iron

Which is the purest form of iron ? (1) Steel (2) Cast iron (3) Pig iron (4) Wrought iron

Description : Which is the purest form of iron ? (1) Steel (2) Cast iron (3) Pig iron (4) Wrought iron

Last Answer : Wrought iron 

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron

Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron

Last Answer : (B) Cast iron

Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron

Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron

Last Answer : (A) Rubber lined mild steel

Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel

Description : Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel

Last Answer : (C) Refractory blocks

The digester of a Gobar gas plant is a (A) Mild steel drum (B) Stainless steel vessel (C) Masonry well (D) Cast iron vessel

Description : The digester of a Gobar gas plant is a (A) Mild steel drum (B) Stainless steel vessel (C) Masonry well (D) Cast iron vessel

Last Answer : (C) Masonry well

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Last Answer : (B) Cast iron

100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Last Answer : (C) Aluminium, tin and rubber

Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel

Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel

Last Answer : (C) Karbate