Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel
Last Answer : (C) Mild steel
Description : The shafts are made of a. mild steel b. alloy steel c. copper alloys d. cast iron.
Last Answer : d. cast iron.
Description : An alloy of iron containing 4% carbon is called (A) High carbon steel (B) Wrought iron (C) Mild steel (D) None of these
Last Answer : (D) None of these
Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron
Last Answer : (B) Pig iron
Description : Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel
Last Answer : (D) High carbon steel
Description : Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel
Last Answer : Answer: Option B
Description : Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese
Last Answer : d. Steel having approx. 0.4% carbon and 0.8% manganese
Description : ______is extensively used for those portions of magnetic circuit which carry steady flux and need superior mechanical properties ? (a) Grey cast-iron (b) Cast steel (c) High carbon steel (d) Stainless steel
Last Answer : (b) Cast steel
Description : Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron
Last Answer : (C) Wrought iron
Description : Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel
Description : Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy
Last Answer : (A) Low carbon
Description : The shovel of seed drill is made up of: A. Cast iron B. Mild steel C. White metal D. Carbon steel
Last Answer : Carbon steel
Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel
Last Answer : a. Soft centre steel
Description : The temperature of oxyacetylene flame is around – (1) 2800°C (2) 3200°C (3) 4000°C (4) 1500°C
Last Answer : (2) 3200°C Explanation: Flames are formed when a fuel gas, like acetylene, reacts with a support has such as oxygen. This reaction creates a lot of heat and light, which we see as a flame. ... flame temperature to allow localized melting of the work piece material (e.g. steel) in a room environment.
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain
Last Answer : (C) Aluminium, tin and rubber
Description : Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks
Last Answer : (B) Mild steel
Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel
Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon
Description : Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel
Last Answer : (B) Carbide
Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel
Last Answer : (B) Cast iron
Description : Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron
Last Answer : D) Wrought iron
Description : Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)
Last Answer : Answer: Option D
Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron
Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron
Last Answer : (A) Rubber lined mild steel
Description : Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel
Last Answer : (C) Refractory blocks
Description : The digester of a Gobar gas plant is a (A) Mild steel drum (B) Stainless steel vessel (C) Masonry well (D) Cast iron vessel
Last Answer : (C) Masonry well
Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel
Last Answer : (C) Karbate
Description : In SO3 absorber (Contact Process), packing material used is of (A) Cast iron (B) Chemical stoneware (C) Karbate (D) Mild steel
Last Answer : (B) Chemical stoneware
Description : Lead is poured into the joint between two- __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement
Last Answer : (C) Cast iron
Description : On being hit with a hammer, __________ will readily fracture. (A) Brass (B) Mild steel (C) Cast iron (D) Lead
Last Answer : C) Cast iron
Description : Lead is poured into the joint between two __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement
Last Answer : Option C
Description : Mild steel is an alloy with carbon content a)0.25%. b)5% c)10%. d)25%
Last Answer : a)0.25%.
Description : Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel
Last Answer : (B) Lead
Description : Liners of a ball mill are never made of (A) Lead (B) Alloy steel (C) Rubber or ceramic material (D) Cast iron
Last Answer : (A) Lead
Description : Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes
Last Answer : (B) Wrought iron cannot be easily forged and welded
Description : Carbon is present in the form of __________ in grey cast iron. (A) Spheroids (B) Nodular aggregates of graphite (C) Flakes
Description : The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions
Last Answer : d. Rope and wood
Description : A mould board of MB plough is made of? a Cast iron b Chilled cast iron c Mild steel d Soft centre steel
Last Answer : d Soft centre steel
Description : - Material used for hand slide is (a) chilled cast iron. (b) cast iron (c) mild steel. (d) gun metal
Last Answer : (c) mild steel
Description : Share for use in sandy soils are made of A)chilled cast iron. B)cast iron C)mild steel. D)gun metal
Last Answer : Share for use in sandy soils are made of A)chilled cast iron. B)cast iron C)mild steel. D)gun metal
Description : is usually used for brush rockers (a) Mild steel (b) Copper (c) Aluminium (d) Cast-iron
Last Answer : (d) Cast-iron
Description : _________ pipe is the most suitable for carrying sanitary drainage. (A) Stainless steel (B) Reinforced cement concrete (C) Cast iron (D) Asbestos cement
Description : Alloy steel containing chromium to resist rusting is known as (a) wrought iron (b) cast iron (c) hard steel (d) stainless steel
Last Answer : Ans:(d)
Description : Alloy steel containing chromium, to resist rusting, is known as (a) Wrought iron (b) Cast iron (c) Hard steel (d) Stainless steel
Description : Which of the following has the poorest weldability? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) High-carbon steel
Last Answer : (D) High-carbon steel
Description : Which of the following will have the highest melting point? (A) Pig iron (B) Mild steel (C) Wrought iron (D) High carbon stee
Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded
Last Answer : (D) Mild steel sheet cannot be spot welded
Description : The steel used in steel cored conductors is usually (a) alloy steel (b) stainless steel (c) mild steel (d) high speed steel (e) all of the above