Plastics are (A) Used in very high temperature applications (B) Non-biodegradable (C) Not suitable for drainage pipe manufacture (D) All (A), (B) & (C)

Plastics are
(A) Used in very high temperature applications
(B) Non-biodegradable
(C) Not suitable for drainage pipe manufacture
(D) All (A), (B) & (C)
by

1 Answer

Answer :

(B) Non-biodegradable
by

Related questions

_________ pipe is the most suitable for carrying sanitary drainage. (A) Stainless steel (B) Reinforced cement concrete (C) Cast iron (D) Asbestos cement

Description : _________ pipe is the most suitable for carrying sanitary drainage. (A) Stainless steel (B) Reinforced cement concrete (C) Cast iron (D) Asbestos cement

Last Answer : C) Cast iron

Which of the following is a biodegradable waste? (1) Wool (2) Polythene bags (3) Plastics (4) Nylon

Description : Which of the following is a biodegradable waste? (1) Wool (2) Polythene bags (3) Plastics (4) Nylon

Last Answer : (1) Wool

Which of the following statement is false? (1) Polystyrene was discovered in 1839 by Edward Simon (2) It is used for making plastics and CD cases (3) It is not biodegradable (4) None of these

Description : Which of the following statement is false? (1) Polystyrene was discovered in 1839 by Edward Simon (2) It is used for making plastics and CD cases (3) It is not biodegradable (4) None of these 

Last Answer : None of these

Which of the following is a biodegradable waste ? (1) Wool (2) Polythene bags (3) Plastics (4) Nylon

Description : Which of the following is a biodegradable waste ? (1) Wool (2) Polythene bags (3) Plastics (4) Nylon

Last Answer : Wool

Aerobic biological oxidation ponds used for the purification of polluted water (A) Destroys/removes pathogen from the sewage (B) Is not very effective for non-biodegradable substances (e.g. ABS) containing effluents (C) Destroys/removes pathogen much more effectively if the sewage is chlorinated (D) All (A), (B) & (C)

Description : Aerobic biological oxidation ponds used for the purification of polluted water (A) Destroys/removes pathogen from the sewage (B) Is not very effective for non-biodegradable substances (e.g. ABS) containing effluents (C) ... much more effectively if the sewage is chlorinated (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Exposure to __________ accelerates the degradation of plastics. (A) Ultraviolet radiation (B) High atmospheric temperature (C) High ambient temperature (D) Damp atmosphere

Description : Exposure to __________ accelerates the degradation of plastics. (A) Ultraviolet radiation (B) High atmospheric temperature (C) High ambient temperature (D) Damp atmosphere

Last Answer : A) Ultraviolet radiation

What happens if I suspect roots might be entering a drainage pipe?

Description : What happens if I suspect roots might be entering a drainage pipe?

Last Answer : Tree roots in drains gain access via the pipe joints, fractures, cracks and through inspection chamber walls and benching. The majority of the drainage systems within the UK are constructed ... reason, we recommend that you have your drains thoroughly investigated with a pre-purchase survey before

What pipe for water drainage in the cottage?

Description : I need to concretize the pipe that will lead the water from the roof to the pond. Can I concrete a plastic pipe? Or rather tin? What is better?

Last Answer : both go, but the metal one will rust and disappear over time ...

Visco-elastic behaviour of materials which is time dependent is common in (A) Plastics (B) Crystalline solid (C) Non-crystalline solids (D) Non-crystalline organic polymer

Description : Visco-elastic behaviour of materials which is time dependent is common in (A) Plastics (B) Crystalline solid (C) Non-crystalline solids (D) Non-crystalline organic polymer

Last Answer : (D) Non-crystalline organic polymer

Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature (C) Double pipe heat exchangers are mostly used in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

Visco-elastic behaviour exhibited by plastics is a __________ like behaviour. (A) Solid (B) Liquid (C) Combination of solid & liquid (D) Neither solid nor liquid

Description : Visco-elastic behaviour exhibited by plastics is a __________ like behaviour. (A) Solid (B) Liquid (C) Combination of solid & liquid (D) Neither solid nor liquid

Last Answer : (C) Combination of solid & liquid

Interchain forces are the weakest in case of (A) Plastics (B) Fibres (C) Elastomers (D) Both rubber & elastomers

Description : Interchain forces are the weakest in case of (A) Plastics (B) Fibres (C) Elastomers (D) Both rubber & elastomers

Last Answer : (D) Both rubber & elastomers

Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450

Description : Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450

Last Answer : (B) 150

Creep is not exhibited at low temperature by (A) Rubber (B) Acrylics (C) Lead (D) Plastics

Description : Creep is not exhibited at low temperature by (A) Rubber (B) Acrylics (C) Lead (D) Plastics

Last Answer : (C) Lead

Pick up the in-correct statement from the following: A. Manholes are provided in sewer pipes at suitable intervals B. Catch basins are generally provided in sewers for carrying drainage discharge C. Inlets are generally provided in all sewers D. None of these

Description : Pick up the in-correct statement from the following: A. Manholes are provided in sewer pipes at suitable intervals B. Catch basins are generally provided in sewers for carrying drainage discharge C. Inlets are generally provided in all sewers D. None of these

Last Answer : ANS: C

For shear strength, triaxial shear test is suitable because (A) It can be performed under all three drainage conditions (B) Precise measurement of the pore pressure and volume change during the test is possible (C) Stress distribution on the failure plane, is uniform (D) All the above

Description : For shear strength, triaxial shear test is suitable because (A) It can be performed under all three drainage conditions (B) Precise measurement of the pore pressure and volume change during the test is possible (C) Stress distribution on the failure plane, is uniform (D) All the above

Last Answer : (D) All the above

The most suitable method for drainage of fine grained cohesive soils is (A) Well point system (B) Vacuum method (C) Deep well system (D) Electro-osmosis method

Description : The most suitable method for drainage of fine grained cohesive soils is (A) Well point system (B) Vacuum method (C) Deep well system (D) Electro-osmosis method

Last Answer : Answer: Option D

Presence of volatile compounds like gasoline, oil, alcohol, ether etc. in municipal sewers may cause (A) Explosion(B) Non biodegradable foam(C) Undesirable plant growth(D) Corrosion

Description : Presence of volatile compounds like gasoline, oil, alcohol, ether etc. in municipal sewers may cause (A) Explosion (B) Non biodegradable foam (C) Undesirable plant growth (D) Corrosion

Last Answer : (A) Explosion

Presence of non-biodegradable substances, like alkyl benzene sulphonate (ABS) from the detergents in polluted water stream causes (A) Fire hazards (B) Explosion hazards (C) Persistent foam (D) Depletion of dissolved oxygen

Description : Presence of non-biodegradable substances, like alkyl benzene sulphonate (ABS) from the detergents in polluted water stream causes (A) Fire hazards (B) Explosion hazards (C) Persistent foam (D) Depletion of dissolved oxygen

Last Answer : (C) Persistent foam

Why not get a small chipper and chip non-recyclable plastics into small pieces before dumping?

Description : Why not get a small chipper and chip non-recyclable plastics into small pieces before dumping?

Last Answer : Because a landfill full of sharp plastic shards is not good for the enviroment. Also given that it won't speed up the rate decomposition I think it isn't worth the effort. Add on ... overall it's probably worsefor the enviroment. It would be better to boycot companies that use plastic packaging.

Differentiate between any five of the following: a) Thermoplastics and thermosetting plastics b) Lunar eclipse and solar eclipse c) Asteroid and meteorite d) Renewable and non-renewable energy resources e) Endothermic and exothermic reactions f) Star and planet g) Nuclear fission and nuclear fusion

Description : Differentiate between any five of the following: a) Thermoplastics and thermosetting plastics b) Lunar eclipse and solar eclipse c) Asteroid and meteorite d) Renewable and non-renewable energy resources e) Endothermic and exothermic reactions f) Star and planet g) Nuclear fission and nuclear fusion

Last Answer : a) Thermoplastics and thermosetting plastics: Thermoplastics: Thermoplastics can be repeatedly softened by heating and hardened by cooling.Thermoplastic molecules, which are linear or slightly branched, do ... or explode in midair. Remains of meteoroids that reach the surface are called meteorites.

The plastics prepared from Vinyl resin are (A) Odourless (B) Non-toxic (C) Transparent (D) All of these

Description : The plastics prepared from Vinyl resin are (A) Odourless (B) Non-toxic (C) Transparent (D) All of these

Last Answer : civil-engineering

Pick up the non-inflammable plastic from the following: (A) Cellulose acetate plastics (B) Polyvinyl chloride plastics (C) Phenol formaldehyde plastic (D) Urea formaldehyde plastic

Description : Pick up the non-inflammable plastic from the following: (A) Cellulose acetate plastics (B) Polyvinyl chloride plastics (C) Phenol formaldehyde plastic (D) Urea formaldehyde plastic

Last Answer : Answer: Option B

During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Description : During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on ... be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Last Answer : (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced)

Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable (C) Gypsum (CaSO4 . 2H2O) is obtained as a by-product in the wet process for manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Description : Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India ... manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate

Last Answer : (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable

A river with an inflow of domestic sewage rich in organic waste may result in (a) an increased production of fish due to biodegradable nutrients (b) death of fish due to lack of oxygen (c) drying of the river very soon due to algal bloom (d) increased population of aquatic food web organisms.

Description : A river with an inflow of domestic sewage rich in  organic waste may result in  (a) an increased production of fish due to  biodegradable nutrients (b) death of fish due to lack of oxygen ( ... of the river very soon due to algal bloom (d) increased population of aquatic food web  organisms.

Last Answer : (d) increased population of aquatic food web  organisms.

A river with an inflow of domestic sewage rich in organic waste may result in (a) an increased production of fish due to biodegradable nutrients (b) death of fish due to lack of oxygen (c) drying of the river very soon due to algal bloom (d) increased population of aquatic food web organisms.

Description : A river with an inflow of domestic sewage rich in organic waste may result in (a) an increased production of fish due to biodegradable nutrients (b) death of fish due to lack of oxygen (c) drying of the river very soon due to algal bloom (d) increased population of aquatic food web organisms.

Last Answer : (b) death of fish due to lack of oxygen

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because – (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because - (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : (3) metals are good conductors of heat Explanation: On a chilly day, the room temperature is lower than our body temperature. Since metals have a higher coefficient of thermal conductivity than plastic, they ... from our fingers will flow to the metal cap much more quickly than to the plastic body.

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : metals are good conductors of heat

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Differentiate Biodegradable and Non-biodegradable waste. -SST 10th

Description : Differentiate Biodegradable and Non-biodegradable waste. -SST 10th

Last Answer : Biodegradable Non-biodegradable The biodegradable wastes break down and decompose by microorganism like bacteria and fungi in the soil. e.g. Wood, Paper etc. Non-biodegradable waste includes that material which does not breakdown or decompose in the soil. e.g. Plastics, Poly- bags etc.

What are the problems caused by the non-biodegradable wastes that we generate? -Biology

Description : What are the problems caused by the non-biodegradable wastes that we generate? -Biology

Last Answer : (i) Non-biodegradable wastes persist in the environment for a long time and cause greater harm to the various members of the ecosystem by causing biological magnification. (ii) Non-biodegradable ... the soil chemistry. in turn affects the fertility of soil and subsequently reduces the crop yield.

Give any two ways in which non-biodegradable substances would affect the environment. -Biology

Description : Give any two ways in which non-biodegradable substances would affect the environment. -Biology

Last Answer : These inert substances simply persist in the environment. This means that these substances require land area for dumping. Excess of fertilizers, pesticides and other chemicals changes soil ... chemicals and heavy metal are easily absorbed by the organisms. This causes biological magnification.

What are the problems caused by the non-biodegradable wastes that we generate ? -Biology

Description : What are the problems caused by the non-biodegradable wastes that we generate ? -Biology

Last Answer : The problems caused by the non-biodegradable wastes are : If the quantity of non-biodegradable matter increases in the nature then bio-magnification of poisonous chemicals in our body ... for new organisms. The increasing quantity of non-biodegradable waste will cause imbalance of ecosystem.

Give any two ways in which non-biodegradable substances would effect the environment. -Biology

Description : Give any two ways in which non-biodegradable substances would effect the environment. -Biology

Last Answer : (i) They cause air, water and soil pollution. (ii) They may cause bio-magnification in the food chain and end up in humans.

Why are some substances biodegradable and some non-biodegradable ? -Biology

Description : Why are some substances biodegradable and some non-biodegradable ? -Biology

Last Answer : The microorganism like bacteria and other decomposer organisms (called saprophytes) present in our environment are specific in their action. They break down the materials or products made from ... in their action that some waste materials are biodegradable, whereas others are non-biodegradable.

Examples of non biodegradable wastes. -Biology

Description : Examples of non biodegradable wastes. -Biology

Last Answer : answer:

What are non biodegradable pollutants? -Biology

Description : What are non biodegradable pollutants? -Biology

Last Answer : answer:

Examples of non biodegradable wastes. -Biology

Description : Examples of non biodegradable wastes. -Biology

Last Answer : answer:

What are non biodegradable pollutants? -Biology

Description : What are non biodegradable pollutants? -Biology

Last Answer : answer:

Which industry produces the most non-biodegradable wastes? -Do You Know?

Description : Which industry produces the most non-biodegradable wastes? -Do You Know?

Last Answer : answer:

Which industry produces the most non-biodegradable wastes? -Do You Know?

Description : Which industry produces the most non-biodegradable wastes? -Do You Know?

Last Answer : answer:

Which of the following statements are correct ? (i) Benzene hexachloride (BHC) is a non-biodegradable pollutant. (ii) Anthropogenic air pollutants are

Description : Which of the following statements are correct ? (i) Benzene hexachloride (BHC) is a non-biodegradable pollutant. (ii) Anthropogenic air pollutants are

Last Answer : Which of the following statements are correct ? (i) Benzene hexachloride (BHC) is a non-biodegradable pollutant. (ii) ... b B. a,c C. b,c D. c,d

Which one is non-biodegradable

Description : Which one is non-biodegradable

Last Answer : Which one is non-biodegradable A. DDT B. Sewage C. Livestock waste D. Market garbage.

Non-biodegradable pollutants are extremly harmful because they

Description : Non-biodegradable pollutants are extremly harmful because they

Last Answer : Non-biodegradable pollutants are extremly harmful because they A. Undergo biomagnification B. Remain in position ... not get recycled D. Both B and C

Non-biodegradable pollutants are extremly harmful because they

Description : Non-biodegradable pollutants are extremly harmful because they

Last Answer : Non-biodegradable pollutants are extremly harmful because they A. Undergo bimagnification B. Remain in position ... not get recyled D. Both B and C

Is a human hair non-biodegradable or biodegradable?

Description : Is a human hair non-biodegradable or biodegradable?

Last Answer : A human hair is biodegradable.

One of the best solutions to get rid of non-biodegradable wastes is - (1) Burning (2) Dumping (3) Burying (4) Recycling

Description : One of the best solutions to get rid of non-biodegradable wastes is - (1) Burning (2) Dumping (3) Burying (4) Recycling

Last Answer : (4) Recycling Explanation: The best way of getting rid of non-biodegradable waste such as plastic is by recycling them. Burning may release toxic gas into the atmosphere. Burying and dumping will hardly solve anything.

Which industry produces the most non-biodegradable wastes?

Description : Which industry produces the most non-biodegradable wastes?

Last Answer : Thermal power plants