Exposure to __________ accelerates the degradation of plastics. (A) Ultraviolet radiation (B) High atmospheric temperature (C) High ambient temperature (D) Damp atmosphere

Exposure to __________ accelerates the degradation of plastics. (A) Ultraviolet radiation
(B) High atmospheric temperature
(C) High ambient temperature
(D) Damp atmosphere
by

1 Answer

Answer :

A) Ultraviolet radiation
by

Related questions

A considerable part of the harmful ultraviolet radiation of the sum does not reach the earth surface, because of the fact that, there is a layer of __________ high above earth's atmosphere, which absorbs it. (A) Hydrogen (B) Carbon dioxide (C) Ozone (D) None of these

Description : A considerable part of the harmful ultraviolet radiation of the sum does not reach the earth surface, because of the fact that, there is a layer of __________ high above earth's atmosphere, which absorbs it. (A) Hydrogen (B) Carbon dioxide (C) Ozone (D) None of these

Last Answer : (C) Ozone

Conversion of a procarcinogen into a carcinogen often requires (A) Proteolysis (B) Microsomal hydroxylation (C) Exposure to ultraviolet radiation (D) Exposure to X-rays

Description : Conversion of a procarcinogen into a carcinogen often requires (A) Proteolysis (B) Microsomal hydroxylation (C) Exposure to ultraviolet radiation (D) Exposure to X-rays

Last Answer : Answer : B

Exposure of DNA to ultraviolet radiation can lead to the formation of (A) Adenine dimers (B) Guanine dimers (C) Thymine dimers (D) Uracil dimers

Description : Exposure of DNA to ultraviolet radiation can lead to the formation of (A) Adenine dimers (B) Guanine dimers (C) Thymine dimers (D) Uracil dimers

Last Answer : Answer : C

A thin, flat & square plate measuring 2 m × 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will remain constant at 30°C, if the convective heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Last Answer : (B) 100

The increasing amount of CO2 in the atmosphere is slowly raising its temperature because it absorbs (a) the infrared part of the solar radiation (b) the ultraviolet part of the solar radiation (c) all the solar radiations (d) the water vapour of the air

Description : The increasing amount of CO2 in the atmosphere is slowly raising its temperature because it absorbs (a) the infrared part of the solar radiation (b) the ultraviolet part of the solar radiation (c) all the solar radiations (d) the water vapour of the air

Last Answer : Ans:(a)

Higher concentration of CO2 in atmosphere (A) Allows visible solar radiation (ultraviolet) of short wave-length to pass through (B) Reflects and absorbs the longer wavelength (infra-red) radiations (C) Prevents solar heat being radiated out completely, resulting in 'heat trap' i.e., global warming (D) All (A), (B) and (C)

Description : Higher concentration of CO2 in atmosphere (A) Allows visible solar radiation (ultraviolet) of short wave-length to pass through (B) Reflects and absorbs the longer wavelength (infra-red) radiations (C) Prevents solar heat being ... in 'heat trap' i.e., global warming (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Green House Effect' means (1) Pollution in houses in tropical region (2) Prevention of ultraviolet radiation by the ozone layer (3) Trapping of solar energy due to atmospheric gases (4) Damage to green painted buildings

Description : Green House Effect' means (1) Pollution in houses in tropical region (2) Prevention of ultraviolet radiation by the ozone layer (3) Trapping of solar energy due to atmospheric gases (4) Damage to green painted buildings

Last Answer : (3) Trapping of solar energy due to atmospheric gases Explanation: The greenhouse effect occurs when Earth's atmosphere traps solar radiation because of the presence of certain gases, causing the ... , nitrous oxide (N2O) and other gases, ac-cording to the Environmental Protection Agency (EPA

Green House Effect’ means (1) Pollution in houses in tropical region (2) Prevention of ultraviolet radiation by the ozone layer (3) Trapping of solar energy due to atmospheric gases (4) Damage to green painted buildings

Description : Green House Effect’ means (1) Pollution in houses in tropical region (2) Prevention of ultraviolet radiation by the ozone layer (3) Trapping of solar energy due to atmospheric gases (4) Damage to green painted buildings

Last Answer : Trapping of solar energy due to atmospheric gases

The ink of a pen leaks out in an airplane because (a) Atmospheric pressure increases (b) Pressure of ink inside is more than the ambient pressure (c) High speed of the aeroplane (d) Temperature difference

Description : The ink of a pen leaks out in an airplane because (a) Atmospheric pressure increases (b) Pressure of ink inside is more than the ambient pressure (c) High speed of the aeroplane (d) Temperature difference

Last Answer : Ans:(b)

Heat transfer by radiation between two bodies at T1 & T2 and in an ambient temperature of Ta °C depends on (A) T1 - T2 (B) T1 - Ta (C) T2 - Ta (D) None of these

Description : Heat transfer by radiation between two bodies at T1 & T2 and in an ambient temperature of Ta °C depends on (A) T1 - T2 (B) T1 - Ta (C) T2 - Ta (D) None of these

Last Answer : (D) None of these

A considerable part of the harmful ultraviolet radiation of the sun does not reach the surface of earth. This is because in the upper atmosphere, ther

Description : A considerable part of the harmful ultraviolet radiation of the sun does not reach the surface of earth. This is because in the upper atmosphere, ther

Last Answer : A considerable part of the harmful ultraviolet radiation of the sun does not reach the surface of earth. This is because ... ` C. `O_(3)` D. `NH_(3)`

In which of the following layer of atmosphere the absorption and scattering of the solar ultraviolet radiation takes place? (1) Troposphere (2) Stratosphere (3) Mesosphere (4) Thermosphere

Description : In which of the following layer of atmosphere the absorption and scattering of the solar ultraviolet radiation takes place? (1) Troposphere (2) Stratosphere (3) Mesosphere (4) Thermosphere

Last Answer : (2) Stratosphere Explanation: Solar ultraviolet radiation undergoes absorption and scattering as it passes through the stratospheric layer of the earth's atmosphere. The ozone layer, a region of Earth's ... result, no UV radiation at wavelengths shorter than 290 nm reaches the surface of the earth.

Ozone layer in the upper parts of the atmosphere serves as a protective shield against harmful (1) solar ultraviolet radiation (2) solar infrared radiation (3) CO2 in the air (4) SO2 in the air

Description : Ozone layer in the upper parts of the atmosphere serves as a protective shield against harmful (1) solar ultraviolet radiation (2) solar infrared radiation (3) CO2 in the air (4) SO2 in the air

Last Answer : (1) solar ultraviolet radiation Explanation: Ozone layer serves as a protective shield against harmful solar ultraviolet radiation.

Ozone layer prevents ------- radiation from entering the atmosphere? A. Infra-red B. Ultraviolet (Answer) C. X-rays

Description : Ozone layer prevents ------- radiation from entering the atmosphere? A. Infra-red B. Ultraviolet (Answer) C. X-rays

Last Answer : B. Ultraviolet (Answer)

Ozone layer in the upper parts of the atmosphere serves as a protective shield against harmful (1) solar ultraviolet radiation (2) solar infrared radiation (3) CO2 in the air (4) SO2 in the air

Description : Ozone layer in the upper parts of the atmosphere serves as a protective shield against harmful (1) solar ultraviolet radiation (2) solar infrared radiation (3) CO2 in the air (4) SO2 in the air

Last Answer : solar ultraviolet radiation

In which of the following layer of atmosphere the absorption and scattering of the solar ultraviolet radiation takes place? (1) Troposphere (2) Stratosphere (3) Mesosphere (4) Thermosphere

Description : In which of the following layer of atmosphere the absorption and scattering of the solar ultraviolet radiation takes place? (1) Troposphere (2) Stratosphere (3) Mesosphere (4) Thermosphere

Last Answer : Stratosphere

Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is retained in ETC iii) heat loss due to conduction back to atmosphere from ETC is high iv) performance of evacuated tube is highly dependent upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Description : Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is ... upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Last Answer : d) i & ii

Standard air is the: a. Mass of 1 cubic meter of dry air at 20°C and atmospheric pressure b. Mass of a cubic meter of air at atmospheric conditions c. Volume of air at ambient temperature and atmospheric pressure d. Volume of 1 kg of dry air at 21°C and atmospheric pressure at sea level or 101.325 kPa e. Volume of 1 kg of air at 15°C and 100 kPa

Description : Standard air is the: a. Mass of 1 cubic meter of dry air at 20°C and atmospheric pressure b. Mass of a cubic meter of air at atmospheric conditions c. Volume of air at ambient temperature and atmospheric pressure ... pressure at sea level or 101.325 kPa e. Volume of 1 kg of air at 15°C and 100 kPa

Last Answer : Answer: D

A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction of the engines for the supply of air (c) Two-cycle engines are not rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Description : A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction ... rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Last Answer : (a) The ambient atmospheric pressure is less at higher altitudes

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

There are five concentric layers within the atmosphere which is differentiated on the basis of temperature. The atmospheric layer which lies close to the earth's surface in which human being along with other organisms live is called troposphere. The rate at which air temperature in the troposphere gradually decreases with height is about __________ °C/km. (A) 0.05 (B) 1 (C) 6.5 (D) 15

Description : There are five concentric layers within the atmosphere which is differentiated on the basis of temperature. The atmospheric layer which lies close to the earth's surface in which human being along with other organisms live is called ... is about __________ °C/km. (A) 0.05 (B) 1 (C) 6.5 (D) 15

Last Answer : (C) 6.5

High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ percent. (A) 5 to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Last Answer : (C) 45 to 50

Is a loss of power of a satellite downlink signal due to earth’s atmosphere. A. Atmospheric loss B. Path loss C. Radiation loss D. RFI

Description : Is a loss of power of a satellite downlink signal due to earth’s atmosphere. A. Atmospheric loss B. Path loss C. Radiation loss D. RFI

Last Answer : B. Path loss

The spectral region of the electromagnetic radiation which passes through the atmosphere without much attenuation is known as: (A) Ozone hole (B) Atmospheric window (C) Ozone window (D) Black hole

Description : The spectral region of the electromagnetic radiation which passes through the atmosphere without much attenuation is known as: (A) Ozone hole (B) Atmospheric window (C) Ozone window (D) Black hole

Last Answer : Answer: Option B

Loss of heat from untagged steam pipe to the ambient air is by (A) Conduction (B) Convection (C) Radiation (D) All (A), (B) & (C)

Description : Loss of heat from untagged steam pipe to the ambient air is by (A) Conduction (B) Convection (C) Radiation (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450

Description : Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450

Last Answer : (B) 150

What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Last Answer : (A) 2

Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the vacuum pump c. Is the pressure loss over a given time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Description : Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the vacuum ... time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Last Answer : a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure

Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the vacuum pump c. Is the pressure loss over a given time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Description : Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the ... time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Last Answer : a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure

The minimum temperature to which the water can be cooled in a cooling tower is the __________ temperature of air. (A) Ambient (B) Dry bulb (C) Dew point (D) Wet bulb

Description : The minimum temperature to which the water can be cooled in a cooling tower is the __________ temperature of air. (A) Ambient (B) Dry bulb (C) Dew point (D) Wet bulb

Last Answer : C) Dew point

In the stratosphere, why does temperature increase with increasing height? (a) Conduction. (b) Convection. (c) Greater absorption of ultraviolet radiation at the top of the strato- sphere. (d) The pressure and density rapidly decrease as you go up through the strato- sphere, thus the ideal gas law requires temperature to increase too.

Description : In the stratosphere, why does temperature increase with increasing height? (a) Conduction. (b) Convection. (c) Greater absorption of ultraviolet radiation at the top of the strato- sphere. (d ... you go up through the strato- sphere, thus the ideal gas law requires temperature to increase too.

Last Answer : Greater absorption of ultraviolet radiation at the top of the strato- sphere.

Weather satellites transmit cloud cover and temperature-humidity profiles back to Earth using images of which combination of the electromagnetic radiation types? w) infra-red and visible light x) ultraviolet and nuclear magnetic y) ultraviolet and infra-red z) ultraviolet and visible light

Description : Weather satellites transmit cloud cover and temperature-humidity profiles back to Earth using images of which combination of the electromagnetic radiation types? w) infra-red and visible light x) ultraviolet and nuclear magnetic y) ultraviolet and infra-red z) ultraviolet and visible light

Last Answer : ANSWER: W -- INFRA-RED AND VISIBLE LIGHT

The formation of oxide film on a metal due to atmospheric exposure reduces its (A) Toughness (B) Stiffness (C) Creep limit (D) All (A), (B) & (C)

Description : The formation of oxide film on a metal due to atmospheric exposure reduces its (A) Toughness (B) Stiffness (C) Creep limit (D) All (A), (B) & (C)

Last Answer : (C) Creep limit

A moderator __________ the neutrons. (A) Slows down (B) Absorbs (C) Accelerates (D) Reflects

Description : A moderator __________ the neutrons. (A) Slows down (B) Absorbs (C) Accelerates (D) Reflects

Last Answer : (A) Slows down

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Plastics are (A) Used in very high temperature applications (B) Non-biodegradable (C) Not suitable for drainage pipe manufacture (D) All (A), (B) & (C)

Description : Plastics are (A) Used in very high temperature applications (B) Non-biodegradable (C) Not suitable for drainage pipe manufacture (D) All (A), (B) & (C)

Last Answer : (B) Non-biodegradable

To remove all the moisture from a wet solid it requires exposure to __________ air. (A) Perfectly dry (B) Highly humid (C) High temperature (D) None of these

Description : To remove all the moisture from a wet solid it requires exposure to __________ air. (A) Perfectly dry (B) Highly humid (C) High temperature (D) None of these

Last Answer : (A) Perfectly dry

In order to obtain spectrum from the emitted radiation, the atomic gas or vapour must be excited at a) much less than atmospheric pressure b) much high than atmospheric pressure c) atmospheric pressure d) high pressure and temperature

Description : In order to obtain spectrum from the emitted radiation, the atomic gas or vapour must be excited at a) much less than atmospheric pressure b) much high than atmospheric pressure c) atmospheric pressure d) high pressure and temperature

Last Answer : a) much less than atmospheric pressure

Microbial degradation of nitrates into atmospheric nitrogen is known as- (1) Ammonification (2) Nitrification (3) Denitrification (4) Putrefaction

Description : Microbial degradation of nitrates into atmospheric nitrogen is known as- (1) Ammonification (2) Nitrification (3) Denitrification (4) Putrefaction

Last Answer : (3) Denitrification Explanation: Denitrification is the biological conversion of nitrate to nitrogen gas, nitric oxide or nitrous oxide. It refers to nitrate reduction by bacterial species such as ... (N2). These bacteria use nitrate as an electron acceptor instead of oxygen during respiration.

Microbial degradation of nitrates into atmospheric nitrogen is known as : (1) Ammonification (2) Nitrification (3) Denitrification (4) Putrefaction

Description : Microbial degradation of nitrates into atmospheric nitrogen is known as : (1) Ammonification (2) Nitrification (3) Denitrification (4) Putrefaction

Last Answer : Denitrification

If a person has been exposed to radiation, presenting symptoms, such as nausea, vomiting, loss of appetite, diarrhea, or fatigue can be expected to occur within _______ hours after exposure? a) 48 to 72 The prodromal phase (presenting symptoms) of radiation exposure occurs within 48 to 72 hours after exposure. Signs and symptoms include nausea, vomiting, loss of appetite, diarrhea, and fatigue. With high-dose radiation exposure, the signs and symptoms may include fever, respiratory distress, and increased excitability.

Description : If a person has been exposed to radiation, presenting symptoms, such as nausea, vomiting, loss of appetite, diarrhea, or fatigue can be expected to occur within _______ hours after exposure? ... prodromal phase (presenting symptoms) of radiation exposure occurs within 48 to 72 hours after exposure.

Last Answer : a) 48 to 72 The prodromal phase (presenting symptoms) of radiation exposure occurs within 48 to 72 hours after exposure. Signs and symptoms include nausea, vomiting, loss of appetite, ... radiation exposure, the signs and symptoms may include fever, respiratory distress, and increased excitability.

The lift of a balloon is (A) Increased, as it rises to a higher altitude (B) Due to the weight of the atmospheric air, that it displaces (C) Not dependent on the temperature of the atmosphere (D) None of these

Description : The lift of a balloon is (A) Increased, as it rises to a higher altitude (B) Due to the weight of the atmospheric air, that it displaces (C) Not dependent on the temperature of the atmosphere (D) None of these

Last Answer : (B) Due to the weight of the atmospheric air, that it displaces

Pick out the wrong statement (A) The concentric atmosphere layer just above troposphere is called stratosphere, which is rich in ozone (B) Mesosphere is characterised by very low atmospheric pressure and low temperature (C) Troposphere is a dusty zone containing water vapor and clouds (D) The radio waves used in the long distance radio communication are reflected back to earth by stratosphere

Description : Pick out the wrong statement (A) The concentric atmosphere layer just above troposphere is called stratosphere, which is rich in ozone (B) Mesosphere is characterised by very low atmospheric ... radio waves used in the long distance radio communication are reflected back to earth by stratosphere

Last Answer : (D) The radio waves used in the long distance radio communication are reflected back to earth by stratosphere

The atmospheric temperature during melting of ice/snow (in the atmosphere) (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the altitude where snow melts Answer

Description : The atmospheric temperature during melting of ice/snow (in the atmosphere) (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the altitude where snow melts Answer

Last Answer : A) Decreases

For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Description : For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Last Answer : (A) Water has a high latent heat of evaporation

In upper layer of atmosphere ozone is formed by (1) the action of ultraviolet rays on oxygen (2) the combination of oxygen molecules (3) subjecting oxygen to high pressure (4) the action of nitrogen on oxygen in atmosphere

Description : In upper layer of atmosphere ozone is formed by (1) the action of ultraviolet rays on oxygen (2) the combination of oxygen molecules (3) subjecting oxygen to high pressure (4) the action of nitrogen on oxygen in atmosphere

Last Answer :  the action of ultraviolet rays on oxygen

Visco-elastic behaviour exhibited by plastics is a __________ like behaviour. (A) Solid (B) Liquid (C) Combination of solid & liquid (D) Neither solid nor liquid

Description : Visco-elastic behaviour exhibited by plastics is a __________ like behaviour. (A) Solid (B) Liquid (C) Combination of solid & liquid (D) Neither solid nor liquid

Last Answer : (C) Combination of solid & liquid

__________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion

Description : __________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion

Last Answer : (C) Transfer

__________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Description : __________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Last Answer : (C) Injection

Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Description : Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Last Answer : (B) Gear