Creep is not exhibited at low temperature by (A) Rubber (B) Acrylics (C) Lead (D) Plastics

Creep is not exhibited at low temperature by
(A) Rubber
(B) Acrylics
(C) Lead
(D) Plastics
by

1 Answer

Answer :

(C) Lead
by

Related questions

Visco-elastic behaviour exhibited by plastics is a __________ like behaviour. (A) Solid (B) Liquid (C) Combination of solid & liquid (D) Neither solid nor liquid

Description : Visco-elastic behaviour exhibited by plastics is a __________ like behaviour. (A) Solid (B) Liquid (C) Combination of solid & liquid (D) Neither solid nor liquid

Last Answer : (C) Combination of solid & liquid

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

Lead alone is not used in storing equipment, because it (A) Is very costly (B) Corrodes easily (C) Is having low creep strength (D) None of these

Description : Lead alone is not used in storing equipment, because it (A) Is very costly (B) Corrodes easily (C) Is having low creep strength (D) None of these

Last Answer : (C) Is having low creep strength

Interchain forces are the weakest in case of (A) Plastics (B) Fibres (C) Elastomers (D) Both rubber & elastomers

Description : Interchain forces are the weakest in case of (A) Plastics (B) Fibres (C) Elastomers (D) Both rubber & elastomers

Last Answer : (D) Both rubber & elastomers

Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making(C) Copper has poor weldability(D) Reinforced plastics are made from both thermoplastic as well asthermosetting plastics

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making

Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to the decrease in electron movement (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal

Which of the following are conductors? a) Ceramics b) Plastics c) Mercury d) Rubber

Description : Which of the following are conductors? a) Ceramics b) Plastics c) Mercury d) Rubber

Last Answer : c) Mercury

Plastics as a material of construction suffer from the drawback of low (A) Machinability (B) Density (C) Strength (D) Plastic deformatio

Description : Plastics as a material of construction suffer from the drawback of low (A) Machinability (B) Density (C) Strength (D) Plastic deformatio

Last Answer : Option C

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450

Description : Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450

Last Answer : (B) 150

Plastics are (A) Used in very high temperature applications (B) Non-biodegradable (C) Not suitable for drainage pipe manufacture (D) All (A), (B) & (C)

Description : Plastics are (A) Used in very high temperature applications (B) Non-biodegradable (C) Not suitable for drainage pipe manufacture (D) All (A), (B) & (C)

Last Answer : (B) Non-biodegradable

Exposure to __________ accelerates the degradation of plastics. (A) Ultraviolet radiation (B) High atmospheric temperature (C) High ambient temperature (D) Damp atmosphere

Description : Exposure to __________ accelerates the degradation of plastics. (A) Ultraviolet radiation (B) High atmospheric temperature (C) High ambient temperature (D) Damp atmosphere

Last Answer : A) Ultraviolet radiation

A material is capable of resisting softening at high temperature, because of its property termed as (A) Hot temper (B) Hot hardness (C) Fatigue (D) Creep

Description : A material is capable of resisting softening at high temperature, because of its property termed as (A) Hot temper (B) Hot hardness (C) Fatigue (D) Creep

Last Answer : (B) Hot hardness

Would a low-temp glue gun be better than a high-temp glue gun for plastics?

Description : Would a low-temp glue gun be better than a high-temp glue gun for plastics?

Last Answer : A low temperature glue gun would be best because there would be less damage to the plastic from the heated glue.

Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Description : Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) ... fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Last Answer : Answer: Option D

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because – (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because - (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : (3) metals are good conductors of heat Explanation: On a chilly day, the room temperature is lower than our body temperature. Since metals have a higher coefficient of thermal conductivity than plastic, they ... from our fingers will flow to the metal cap much more quickly than to the plastic body.

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : metals are good conductors of heat

Polymorphism is not exhibited by (A) Carbon (B) Iron (C) Phosphorous (D) None of these

Description : Polymorphism is not exhibited by (A) Carbon (B) Iron (C) Phosphorous (D) None of these

Last Answer : (D) None of these

High copper amalgam lasts longer than low copper amalgam because of:** A. Increased compressive strength B. Increased corrosion resistance C. High creep D. Increased tensile strength E. Decreased setting expansion

Description : High copper amalgam lasts longer than low copper amalgam because of:**  A. Increased compressive strength  B. Increased corrosion resistance  C. High creep  D. Increased tensile strength  E. Decreased setting expansion 

Last Answer : A. Increased compressive strength 

Synthetic rubber (A) Deforms, if stretched to double of its original dimension (B) Is brittle at low temperature (C) Is softer at higher temperature (D) Is highly permeable to air & water and is readily attacked by chemicals & atmospheric gases

Description : Synthetic rubber (A) Deforms, if stretched to double of its original dimension (B) Is brittle at low temperature (C) Is softer at higher temperature (D) Is highly permeable to air & water and is readily attacked by chemicals & atmospheric gases

Last Answer : (D) Is highly permeable to air & water and is readily attacked by chemicals & atmospheric gases

Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Description : Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Last Answer : (A) Decorative paint

__________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion

Description : __________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion

Last Answer : (C) Transfer

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication(C) Develop new improved properties not present in the original resin(D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resin (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Molecular weights of plastics ranges from (A) 1000 to 5000 (B) 5000 to 1000 (C) 20000 to 25000 (D) 10 9 to 10

Description : Molecular weights of plastics ranges from (A) 1000 to 5000 (B) 5000 to 1000 (C) 20000 to 25000 (D) 10 9 to 10

Last Answer : (C) 20000 to 25000

Which of the following additives are added to plastics to make it impervious to X-rays? (A) Asbestos (B) Barium salt (C) Carborundum (D) Phthalic acid

Description : Which of the following additives are added to plastics to make it impervious to X-rays? (A) Asbestos (B) Barium salt (C) Carborundum (D) Phthalic acid

Last Answer : (B) Barium salt

__________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Description : __________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Last Answer : (C) Injection

Visco-elastic behaviour of materials which is time dependent is common in (A) Plastics (B) Crystalline solid (C) Non-crystalline solids (D) Non-crystalline organic polymer

Description : Visco-elastic behaviour of materials which is time dependent is common in (A) Plastics (B) Crystalline solid (C) Non-crystalline solids (D) Non-crystalline organic polymer

Last Answer : (D) Non-crystalline organic polymer

Hard pitch is used for making (A) Pulverised fuel (B) Perfumes (C) Insecticides (D) Plastics

Description : Hard pitch is used for making (A) Pulverised fuel (B) Perfumes (C) Insecticides (D) Plastics

Last Answer : (A) Pulverised fuel

Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Description : Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Last Answer : (B) Gear

Molecular weight of plastics ranges from (A) 5000 to 10000(B) 20000 to 250000 (C) 500 to 5000 (D) 106 to 109

Description : Molecular weight of plastics ranges from (A) 5000 to 10000 (B) 20000 to 250000 (C) 500 to 5000 (D) 106 to 109

Last Answer : (B) 20000 to 250000

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ammonium chloride solution is stored/ treated in __________ vessels/pipes. (A) Plain carbon steel (B) Stainless steel (C) Rubber or durmet-20 lined (D) Lead

Description : Ammonium chloride solution is stored/ treated in __________ vessels/pipes. (A) Plain carbon steel (B) Stainless steel (C) Rubber or durmet-20 lined (D) Lead

Last Answer : (C) Rubber or durmet-20 lined

In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Last Answer : (B) Cast iron

Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron

Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron

Last Answer : (A) Rubber lined mild steel

Hydrochloric acid is stored in a __________ steel vessel. (A) Lead lined (B) Rubber lined (C) Glass lined (D) Stainless

Description : Hydrochloric acid is stored in a __________ steel vessel. (A) Lead lined (B) Rubber lined (C) Glass lined (D) Stainless

Last Answer : (B) Rubber lined

Liners of a ball mill are never made of (A) Lead (B) Alloy steel (C) Rubber or ceramic material (D) Cast iron

Description : Liners of a ball mill are never made of (A) Lead (B) Alloy steel (C) Rubber or ceramic material (D) Cast iron

Last Answer : (A) Lead

Brine solution is stored/treated in __________ lined vessels/pipes. (A) Rubber (B) Lead (C) Glass (D) Nickel

Description : Brine solution is stored/treated in __________ lined vessels/pipes. (A) Rubber (B) Lead (C) Glass (D) Nickel

Last Answer : (D) Nickel

Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with(A) Acidic refractory(B) Rubber(C) Karbate(D) Lead or acid proof bricks

Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid proof bricks

Last Answer : (A) Acidic refractory

Hydrochloric acid is stored in a __________vessel. (A) Lead lined steel (B) Rubber lined steel (C) Stainless steel (D) Cast iron

Description : Hydrochloric acid is stored in a __________vessel. (A) Lead lined steel (B) Rubber lined steel (C) Stainless steel (D) Cast iron

Last Answer : (B) Rubber lined steel

Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks

Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks

Last Answer : (D) Lead or acid-proof bricks

Do you think rape victims are also to blame for their fate because they dressed up/exhibited behaviors that attracted unwanted attention?

Description : Do you think rape victims are also to blame for their fate because they dressed up/exhibited behaviors that attracted unwanted attention?

Last Answer : No.

Do you have a story about someone who has exhibited humility?

Description : Do you have a story about someone who has exhibited humility?

Last Answer : It is really the better kind of person who demonstrates humility, like the Dali Lama and people like that. Maybe it's actually easier to be humble when you are content with who you are because you have ... be humble while working on yourself as a person, but don't let people walk on you at all.

How is plato's synthesis exhibited in the model of the divided line?

Description : How is plato's synthesis exhibited in the model of the divided line?

Last Answer : Cough, homework, cough.

Indicate the types of isomerisms exhibited by the complex [Co(NH3)5 (NO2)] (NO3)2. (At. no. Co = 27) -Chemistry

Description : Indicate the types of isomerisms exhibited by the complex [Co(NH3)5 (NO2)] (NO3)2. (At. no. Co = 27) -Chemistry

Last Answer : It shows ionisation isomerism and linkage isomerism.

Tube in a tube plan is not exhibited by which one of the following phyla ?

Description : Tube in a tube plan is not exhibited by which one of the following phyla ?

Last Answer : Tube in a tube plan is not exhibited by which one of the following phyla ? A. Coelenterata B. Annelida C. Aschelminthes D. Arthropoda

Homology is exhibited by :

Description : Homology is exhibited by :

Last Answer : Homology is exhibited by : A. Wings of butterfly, birds and bat B. Paddel of whale, forearm of ... of monkey and bird D. Sting of scropion and Apis

Which isomerism is exhibited by `[Co(NH_(3))_(6)][Cr(CN)_(6)] and [Cr(NH_(3))_(6)][Co(CN)_(6)]`?

Description : Which isomerism is exhibited by `[Co(NH_(3))_(6)][Cr(CN)_(6)] and [Cr(NH_(3))_(6)][Co(CN)_(6)]`?

Last Answer : Which isomerism is exhibited by `[Co(NH_(3))_(6)][Cr(CN)_(6)] and [Cr(NH_(3))_(6) ... )]`? A. Ionization B. Linkage C. Coordination D. Polymerization.

The highest molar conductivity will be exhibited by the complex .

Description : The highest molar conductivity will be exhibited by the complex .

Last Answer : The highest molar conductivity will be exhibited by the complex . A. `[Cr(NH_(3))_(6)]Cl_(3)` B. `[Cr(NH_(3))_ ... (2)]Cl` D. `[Cr(NH_(3))_(6)Cl_(3)]`

Which kind of isomerism is exhibited by octahedral `[Co(NH_(3))_(4)Br_(2)]Cl` ?

Description : Which kind of isomerism is exhibited by octahedral `[Co(NH_(3))_(4)Br_(2)]Cl` ?

Last Answer : Which kind of isomerism is exhibited by octahedral `[Co(NH_(3))_(4)Br_(2)]Cl` ? A. ... and optical C. Optical and ionization D. Geometrical only

Paramagnetism is exhibited by molecules which

Description : Paramagnetism is exhibited by molecules which

Last Answer : Paramagnetism is exhibited by molecules which A. not attracted into a magnetic field B. ... unpaired electrons D. carrying a positive charge