A hollow circular pipe with non-reflective inner surface is cut into 5 pieces and arranged as shown in the figure below. If it is illuminated from below using a torch as shown in the figure, what would be the profile of the light falling on the sheet kept above?

A hollow circular pipe with non-reflective inner surface is cut into 5 pieces and arranged as shown in the figure below. If it is illuminated from below using a torch as shown in the figure, what would be the profile of the light falling on the sheet kept above?

Image 1057 - .jpg

by

1 Answer

Answer :

A
by

Related questions

Lead pipe is (A) Especially resistant to solutions containing H2SO4 (B) Usually joined by burning (e.g. by melting to adjacent pieces with a torch) (C) Having very low elastic limit resulting in permanent deformation from either mechanical or thermal strain (D) All (A), (B) and (C)

Description : Lead pipe is (A) Especially resistant to solutions containing H2SO4 (B) Usually joined by burning (e.g. by melting to adjacent pieces with a torch) (C) Having very low elastic limit resulting in permanent deformation from either mechanical or thermal strain (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C

A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Description : A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Last Answer : (c) outer surface of shaft

Sohan wants to show gratitude towards his teacher by giving her a card made by him. He has three pieces of trapezium pasted one above the other as shown in fig. These pieces are arranged in a way that AB||HC || GD || FE. Also BC=CD=DE, and GF=6 cm. He wants to decorate the card by putting up a colored tape on the non-parallel sides of the trapezium.. -Maths 9th

Description : Sohan wants to show gratitude towards his teacher by giving her a card made by him. He has three pieces of trapezium pasted one above the other as shown in fig. These pieces are arranged in a way that ... the card by putting up a colored tape on the non-parallel sides of the trapezium.. -Maths 9th

Last Answer : Let us consider the following lay out of the greeting card. Trapeziums are arranged in such a way that AB || HC || GD || FE. Also BC=CD=DE and GF=6 cm and DE = 4cm. If three parallel lines make equal ... HG+GF+BC+CD+DE = 6+6+6+4+4+4=30 cm. (b) The values are: Happiness, beauty, Knowledge.

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

The outer and inner diameters of a circular pipe are 6 cm and 4 cm respectively. If its length is 10 cm, then what is the total surface -Maths 9th

Description : The outer and inner diameters of a circular pipe are 6 cm and 4 cm respectively. If its length is 10 cm, then what is the total surface -Maths 9th

Last Answer : answer:

The figure below shows the structure of a mitochondrion with its four parts labelled A, B, C and D. Select the part correctly matched with its function. D B A C (a) D (outer membrane) – gives rise to inner membrane by splitting (b) B (inner membrane) – forms infoldings called cristae (c) C (crista) – possesses single circular DNA molecule and ribosomes (d) A (matrix) – major site for respiratory chain enzyme

Description : The figure below shows the structure of a mitochondrion with its four parts labelled A, B, C and D. Select the part correctly matched with its function. D B A C (a) D (outer ... possesses single circular DNA molecule and ribosomes (d) A (matrix) - major site for respiratory chain enzyme

Last Answer : (b) B (inner membrane) – forms infoldings called cristae

A colliodal solution is kept in dark and is illuminated by a beam of light then brightness appears at the right angle of direction of light. This effe

Description : A colliodal solution is kept in dark and is illuminated by a beam of light then brightness appears at the right angle of direction of light. This effe

Last Answer : A colliodal solution is kept in dark and is illuminated by a beam of light then brightness appears at ... C. Hardy schalze effect D. None of these

A wire whose resistance is 90 ohm is cut into 3 pieces of equal lengths which are then arranged in parallel. Calculate the resistance of the combinati

Description : A wire whose resistance is 90 ohm is cut into 3 pieces of equal lengths which are then arranged in parallel. Calculate the resistance of the combinati

Last Answer : A wire whose resistance is 90 ohm is cut into 3 pieces of equal lengths which are then ... in parallel. Calculate the resistance of the combination.

Sohan wants to show gratitude towards his teacher by giving her a card made by him. He has three pieces of trapezium pasted one above the other as shown in fig. These pieces are arranged in a way that AB||HC || GD || FE. Also BC=CD=DE, and GF=6 cm... -Maths 9th

Description : Sohan wants to show gratitude towards his teacher by giving her a card made by him. He has three pieces of trapezium pasted one above the other as shown in fig. These pieces are arranged in a way that AB||HC || GD || FE. Also BC=CD=DE, and GF=6 cm... -Maths 9th

Last Answer : Given : Sohan wants to show gratitude towards his teacher by giving her a card made by him. He has three pieces of trapezium pasted one above the other as shown in the fig. These pieces are arranged ... length of coloured tape required = 30 cm (b) The values are : Happiness, beauty, Knowledge.

Torch is kept at height from top surface of rail head? (i) 30 to 55 mm (ii) 35 to 40 mm (iii) 40 to 45 mm

Description : Torch is kept at height from top surface of rail head? (i) 30 to 55 mm (ii) 35 to 40 mm (iii) 40 to 45 mm

Last Answer : (iii) 40 to 45 mm

. In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with increasing Reynolds number (C) Point of maximum instability exists at a distance of 2r/3 from the pipe wall (r = pipe radius) (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Description : . In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with ... , shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Last Answer : (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

What's the word in English for the path of light on a reflective surface made by a light source above the surface (such as moonlight on the water)? Will accept non-English words as well ;-) Thanks!

Description : What's the word in English for the path of light on a reflective surface made by a light source above the surface (such as moonlight on the water)? Will accept non-English words as well ;-) Thanks!

Last Answer : Reflection? Reflective shimmer?

Thylakoids removed from chloroplasts were kept in illuminated culture having `CO_2` and water. It did not produce sugar because of

Description : Thylakoids removed from chloroplasts were kept in illuminated culture having `CO_2` and water. It did not produce sugar because of

Last Answer : Thylakoids removed from chloroplasts were kept in illuminated culture having `CO_2` and water ... D. Nonfromation of linght assimilatory power

What is the shear stress acting on the outer surface of a hollow shaft subjected to a torque of 100 Nm?(The inner and outer diameter of the shaft is 15 mm and 30 mm respectively.) a. 50.26 N/mm2 b. 40.24 N/mm2 c. 20.120 N/mm2 d. 8.74 N/mm2

Description : What is the shear stress acting on the outer surface of a hollow shaft subjected to a torque of 100 Nm?(The inner and outer diameter of the shaft is 15 mm and 30 mm respectively.) a. 50.26 N/mm2 b. 40.24 N/mm2 c. 20.120 N/mm2 d. 8.74 N/mm2

Last Answer : c. 20.120 N/mm2

Maximum shear stress in a hollow shaft subjected to a torsional moment is at the a. Middle of thickness. b. At the inner surface of the shaft. c. At the outer surface of the shaft. d. At the middle surface of the shaft.

Description : Maximum shear stress in a hollow shaft subjected to a torsional moment is at the a. Middle of thickness. b. At the inner surface of the shaft. c. At the outer surface of the shaft. d. At the middle surface of the shaft.

Last Answer : c. At the outer surface of the shaft.

A hollow METALLIC sphere has an inner radius A and an outer radius B. If charge is placed on the inner surface, that is at radius A, where is the charge located after it has come to rest?

Description : A hollow METALLIC sphere has an inner radius A and an outer radius B. If charge is placed on the inner surface, that is at radius A, where is the charge located after it has come to rest?  

Last Answer : ANSWER: ON THE SPHERE'S OUTER SURFACE or OUTSIDE RADIUS B 

An epithelial tissue which has thin flat cells, arranged edge to edge so as to appear like closely packed tiles, is found to be present at (a) outer surface of ovary (b) inner lining of Fallopian tube (c) inner lining of stomach (d) inner lining of cheeks.

Description : An epithelial tissue which has thin flat cells, arranged edge to edge so as to appear like closely packed tiles, is found to be present at (a) outer surface of ovary (b) inner lining of Fallopian tube (c) inner lining of stomach (d) inner lining of cheeks.

Last Answer : (d) inner lining of cheeks.

How many 10cm square pieces can be cut with 2m rectangular sheet?

Description : How many 10cm square pieces can be cut with 2m rectangular sheet?

Last Answer : What is the answer ?

A child accidentally drops a square ceramic tile. It breaks into smaller pieces as shown in Figure P. To avoid a scolding, she plans to compose a mural of broken pieces to gift to her mother. Which figure out of the given options could she make?

Description : A child accidentally drops a square ceramic tile. It breaks into smaller pieces as shown in Figure P. To avoid a scolding, she plans to compose a mural of broken pieces to gift to her mother. Which figure out of the given options could she make?

Last Answer : C 

In case of thin film of non-uniform thickness, when illuminated with white light, the film appears colored. This is due to change of what factor? (a) Conditions for path difference at different points of film (b) Change in optical path difference at different points of film (c) Thickness of film is different at different points of film (d) All of above

Description : In case of thin film of non-uniform thickness, when illuminated with white light, the film appears colored. This is due to change of what factor? (a) Conditions for path difference at different points of ... of film (c) Thickness of film is different at different points of film (d) All of above

Last Answer : (d) All of above

The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm for an eccentric load 100 t for non-development of tension, is (A) 2.75 cm (B) 3.00 cm (C) 3.50 cm (D) 4.25 cm

Description : The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm  for an eccentric load 100 t for non-development of tension, is  (A) 2.75 cm  (B) 3.00 cm  (C) 3.50 cm  (D) 4.25 cm

Last Answer : (D) 4.25 cm

Which of the following is the best revision of the inflated language example below The contemplation of the illuminated object on the wall for the vertical movement apparatus will render your position on the first floor irrelevant, until you make the....?

Description : Which of the following is the best revision of the inflated language example below The contemplation of the illuminated object on the wall for the vertical movement apparatus will render your position on the first floor irrelevant, until you make the....?

Last Answer : You should push the button to call the elevator to the first floor.

A vertically immersed surface is shown in the below figure. The distance of its centre of pressure from the water surface is (A) (bd²/12) + (B) (d²/12 ) + (C) b²/12 + (D) d²/12 +

Description : A vertically immersed surface is shown in the below figure. The distance of its centre of pressure from the water surface is (A) (bd²/12) + (B) (d²/12 ) + (C) b²/12 + (D) d²/12 +

Last Answer : Answer: Option B

Four equal sized maximum circular plates are cut off from a square sheet of area 784 cm2. What is the circumference of each plate? a) 22 cm b) 44 cm c) 42 cm d) 40cm

Description : Four equal sized maximum circular plates are cut off from a square sheet of area 784 cm2. What is the circumference of each plate? a) 22 cm b) 44 cm c) 42 cm d) 40cm

Last Answer : b) 44 cm

Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.

Description : Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.

Last Answer : Operation Sheet with correct sequence of operations for the above given component by assuming suitable material and cutting conditions is as shown in below table;

The blastomeres in the blastocyst are arranged into an outer layer `____A____` and inner group of cells attached to trophoblast called the `___B____`.

Description : The blastomeres in the blastocyst are arranged into an outer layer `____A____` and inner group of cells attached to trophoblast called the `___B____`.

Last Answer : The blastomeres in the blastocyst are arranged into an outer layer `____A____` and inner group of ... are trophoblast D. Both are inner cell masses

Large diameter sewers subjected to external pressure alone, are reinforced A. Near the inner surface of the pipe B. Near the outer surface of the pipe C. Both A. and B. D. With elliptical cage

Description : Large diameter sewers subjected to external pressure alone, are reinforced A. Near the inner surface of the pipe B. Near the outer surface of the pipe C. Both A. and B. D. With elliptical cage

Last Answer : ANS: D

If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque when t attains maximum shear stress fs the ratio of inner diameter to outer diameter, is 17/64 (fs/N) (A) 1/2 (B) 1/3 (C) 1/4 (D) 1/5

Description : If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque  when t attains maximum shear stress fs  the ratio of inner diameter to outer diameter, is 17/64  (fs/N)  (A) 1/2  (B) 1/3  (C) 1/4  (D) 1/5

Last Answer : (C) 1/4 

The inner diameter of a circular well is 3.5m. It is 10m deep. Find (i) its inner curved surface area, (ii) the cost of plastering this curved surface at the rate of Rs. 40 per m2. -Maths 9th

Description : The inner diameter of a circular well is 3.5m. It is 10m deep. Find (i) its inner curved surface area, (ii) the cost of plastering this curved surface at the rate of Rs. 40 per m2. -Maths 9th

Last Answer : Inner radius of circular well, r = 3.5/2m = 1.75m Depth of circular well, say h = 10m (i) Inner curved surface area = 2πrh = (2 (22/7 ) 1.75 10) = 110 Therefore, the inner curved surface ... area = Rs (110 40) = Rs.4400 Therefore, the cost of plastering the curved surface of the well is Rs. 4400.

The outer and the inner radii of a hollow sphere are 12 cm and 10 cm. Find its volume. -Maths 9th

Description : The outer and the inner radii of a hollow sphere are 12 cm and 10 cm. Find its volume. -Maths 9th

Last Answer : This answer was deleted by our moderators...

The outer and the inner radii of a hollow sphere are 12 cm and 10 cm. Find its volume. -Maths 9th

Description : The outer and the inner radii of a hollow sphere are 12 cm and 10 cm. Find its volume. -Maths 9th

Last Answer : This answer was deleted by our moderators...

(A)______ muscles are located in the inner walls of hollow visceral organs of the body like the alimentary canal, reproductive tract etc. they do not

Description : (A)______ muscles are located in the inner walls of hollow visceral organs of the body like the alimentary canal, reproductive tract etc. they do not

Last Answer : (A)______ muscles are located in the inner walls of hollow visceral organs of the body like the alimentary ... (B)____ and are in (C)____ appearance.

Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the ma

Description : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the ma

Last Answer : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2 ... the material is `2.0xx10^(-8)(Omega)m`.

Heat flow across a hollow sphere of inner radius 'r1' and outer radius 'r2' is directly proportional to (A) (r2- r1)/r1. r2 (B) r1. r2/(r2- r1) (C) (r2 + r1)/r1. r2 (D) r1. r2/(r2 + r1)

Description : Heat flow across a hollow sphere of inner radius 'r1' and outer radius 'r2' is directly proportional to (A) (r2- r1)/r1. r2 (B) r1. r2/(r2- r1) (C) (r2 + r1)/r1. r2 (D) r1. r2/(r2 + r1)

Last Answer : (B) r1. r2/(r2- r1)

A hollow shaft has an inner diameter of 3.7 cm and an outer diameter of 4.0 cm. A 1 kN-m torque is applied to this shaft. What is the shear stress at the mid-radius of this shaft? (a) 117Mpa (b) 178 Mpa (c) 286 Mpa (d) 363 Mpa

Description : A hollow shaft has an inner diameter of 3.7 cm and an outer diameter of 4.0 cm. A 1 kN-m torque is applied to this shaft. What is the shear stress at the mid-radius of this shaft? (a) 117Mpa (b) 178 Mpa (c) 286 Mpa (d) 363 Mpa

Last Answer : (c) 286 Mpa

A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum permissible angle of twist in the shaft is 1o. The inner diameter of the shaft is 0.7 times the outer diameter. The modulus of rigidity is 80 GPa. The outside diameter (in mm) of the shaft is _______. (a) 43 to 45 (b) 50to 60 (c) 70 to 80 (d) 85 to 100

Description : A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum permissible angle of twist in the shaft is 1o. The inner diameter of the shaft is 0.7 times the outer diameter. The modulus of ... shaft is _______. (a) 43 to 45 (b) 50to 60 (c) 70 to 80 (d) 85 to 100

Last Answer : (a) 43 to 45

The torque transmitted by a hollow shaft of outer diameter (D) and inner diameter (d) (a)π/4fs(D2-d2)/D (b) π/4fs(D3-d3)/D (c) π/4fs(D4-d4)/D (d) π/4fs(D4-d4)/D

Description : The torque transmitted by a hollow shaft of outer diameter (D) and inner diameter (d) (a)π/4fs(D2-d2)/D (b) π/4fs(D3-d3)/D (c) π/4fs(D4-d4)/D (d) π/4fs(D4-d4)/D

Last Answer : (c) π/4fs(D4-d4)/D

The polar moment of inertia of a hollow shaft of outer diameter (D) and inner diameter (d) is given by. (a)π/16(D3-d3) (b) π/16(D4-d4) (c) π/16(D4-d4) (d) π/16(D4-d4/d)

Description : The polar moment of inertia of a hollow shaft of outer diameter (D) and inner diameter (d) is given by. (a)π/16(D3-d3) (b) π/16(D4-d4) (c) π/16(D4-d4) (d) π/16(D4-d4/d)

Last Answer : (b) π/16(D4-d4)

Which of the following is incorrect? a. In a solid shaft maximum shear stress occurs at radius = radius of shaft b. In a solid shaft maximum shear stress occurs at center c. In a hollow shaft maximum shear stress occurs at outer radius d. In a hollow shaft minimum shear stress occurs at inner radius

Description : Which of the following is incorrect? a. In a solid shaft maximum shear stress occurs at radius = radius of shaft b. In a solid shaft maximum shear stress occurs at center c. In a hollow ... maximum shear stress occurs at outer radius d. In a hollow shaft minimum shear stress occurs at inner radius

Last Answer : b. In a solid shaft maximum shear stress occurs at center

The ratio of strength of a hollow shaft to that of a solid shaft subjected to torsion if both are of the same material and of the same outer diameters, the inner diameter of hollow shaft being half of the outer diameter is a. 15/16 b. 16/15 c. 7/8 d. 8/7

Description : The ratio of strength of a hollow shaft to that of a solid shaft subjected to torsion if both are of the same material and of the same outer diameters, the inner diameter of hollow shaft being half of the outer diameter is a. 15/16 b. 16/15 c. 7/8 d. 8/7

Last Answer : a. 15/16

An amusement fair was organised in a circular park for the children of slum clusters. Free food was supplied to them at 4 stalls situated at A, B, C and D as shown in the given figure. -Maths 9th

Description : An amusement fair was organised in a circular park for the children of slum clusters. Free food was supplied to them at 4 stalls situated at A, B, C and D as shown in the given figure. -Maths 9th

Last Answer : (i) From figure , it is clear that angle between the lines joining stalls C,D and stalls C, B is ∠BCD . Given, ∠DBC = 60° and ∠BAC = 40° CD is a chord of circle. Here, ∠CBD and ... for society. (iii) Other social issues for which such compaigns are required, are old age home, orphanages, etc.

An amusement fair was organised in a circular park for the children of slum clusters. Free food was supplied to them at 4 stalls situated at A, B, C and D as shown in the given figure. -Maths 9th

Description : An amusement fair was organised in a circular park for the children of slum clusters. Free food was supplied to them at 4 stalls situated at A, B, C and D as shown in the given figure. -Maths 9th

Last Answer : (i) From figure , it is clear that angle between the lines joining stalls C,D and stalls C, B is ∠BCD . Given, ∠DBC = 60° and ∠BAC = 40° CD is a chord of circle. Here, ∠CBD and ... for society. (iii) Other social issues for which such compaigns are required, are old age home, orphanages, etc.

A circular loop of mass m and radius r in X-Y plane of a horizontal table as shown in figure. A uniform magnetic field B is applied parallel to X-axis

Description : A circular loop of mass m and radius r in X-Y plane of a horizontal table as shown in figure. A uniform magnetic field B is applied parallel to X-axis

Last Answer : A circular loop of mass m and radius r in X-Y plane of a horizontal table as shown in figure. A uniform ... . `(mg)/(2pirB)` D. `(pirB)/(mgl)`

Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure. `otimes` direction indicates a direction perpendicular

Description : Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure. `otimes` direction indicates a direction perpendicular

Last Answer : Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure ... to paper inwards. Match the following table.

Study the given figure below and answer the question that follow important-questions-for-class-12-biology-cbse-fertilisation-pregnancy-and-embryonic-development-t-33-3 (i)Name the stage of human embryo the figure represents. (ii)Identify Ain the figure and mention its function. (iii)Mention the fate of the inner cell mass after implantation in the uterus. (iv)Where are the stem cells located in this embryo? -Biology

Description : Study the given figure below and answer the question that follow important-questions-for-class-12-biology-cbse-fertilisation-pregnancy-and-embryonic-development-t-33-3 (i)Name the stage of human embryo the ... implantation in the uterus. (iv)Where are the stem cells located in this embryo? -Biology

Last Answer : (i)The stage is blastocyst. (ii) A—Trophoblast. It helps in attachment to endometrium during implantation and provides nourishment to developing embryo. (iii) Inner cell mass acts as precursor to embryo ... into ectoderm and endoderm. (iv) Stem cells are located in inner cell mass of embryo.

Figure P shows an isometric view of an object made with a single sheet of cardboard. Figure Q shows the front view of the same object after colouring. Which option shows the object after it is cut open?

Description : Figure P shows an isometric view of an object made with a single sheet of cardboard. Figure Q shows the front view of the same object after colouring. Which option shows the object after it is cut open?

Last Answer : C

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

There are 100 light bulbs lined up in a row in a long room. Each bulb has its own switch and is currently switched off. The room has an entry door and an exit door. There are 100 people lined up outside the entry door. Each bulb is numbered consecutively from 1 to 100. So is each person. Person No. 1 enters the room, switches on every bulb, and exits. Person No. 2 enters and flips the switch on every second bulb (turning off bulbs 2, 4, 6, ...). Person No. 3 enters and flips the switch on every third bulb (changing the state on bulbs 3, 6, 9, ...). This continues until all 100 people have passed through the room. What is the final state of bulb No. 64? And how many of the light bulbs are illuminated after the 100th person has passed through the room? -Riddles

Description : There are 100 light bulbs lined up in a row in a long room. Each bulb has its own switch and is currently switched off. The room has an entry door and an exit door. There are 100 people ... And how many of the light bulbs are illuminated after the 100th person has passed through the room? -Riddles

Last Answer : First think who will operate each bulb, obviously person #2 will do all the even numbers, and say person #10 will operate all the bulbs that end in a zero. So who would operate for example bulb 48: Persons numbered: 1 & 48 ... 100 (1, 4, 9, 16, 25, 36, 49, 64, 81 & 100) hence 10 bulbs remain on.

A soap bubble shows colours when illuminated with white light. This is due to – (1) Diffraction (2) Polarization (3) Interference (4) Reflection

Description : A soap bubble shows colours when illuminated with white light. This is due to – (1) Diffraction (2) Polarization (3) Interference (4) Reflection

Last Answer : (3) Interference Explanation: The iridescent colours of soap bubbles are caused by interfering of (internally and externally) reflected light waves and are determined by the thickness of the film. This phenomenon ... are the same as the phenomenon causing the colours in an oil slick on a wet road.