Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.

Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.
by

1 Answer

Answer :

Operation Sheet with correct sequence of operations for the above given component by assuming suitable material and cutting conditions is as shown in below table;

image

by

Related questions

State the importance of operation sheet. How will it help you to improve process planning?

Description : State the importance of operation sheet. How will it help you to improve process planning?

Last Answer : Importance of operation Sheet: [1] A process planning used in the routing which is also known as Route Sheet, Process Sheet or Operation Sheet. [2] It consists of details of operations, sequences, types ... to determine the efficiency of a work centre. [6] It helps to trace the material movement.

How inspection stages are determined? State the significance of operation sheet.

Description : How inspection stages are determined? State the significance of operation sheet.

Last Answer : Following points taken into considerations for determine stages of inspection. 1. Type of production system. i.e. Job, batch or mass etc. 2. Nature of product i.e. complex which consist of more number ... sheet is one of the activity in the process plan, it helps to get a systematic process plan.

State the information required to determine operation sequence.

Description : State the information required to determine operation sequence.

Last Answer : Following information required to determine operation sequence; 1. Specification of raw material. 2. Specification of final product. 3. Time availability for dispatch. 4. Types of machine available. 5 ... 8. Plant layout. 9. Quantity to be manufactured. 10. Tolerance and accuracy.

Prepare outline process chart for replacement of battery in a car.

Description : Prepare outline process chart for replacement of battery in a car. 

Last Answer : Outline process chart for replacement of battery in a car. Task/Job “Replacement battery in a car Charted by: XYZ Chart begins with: Disconnect the electric supply Charted by: ABC Chart ends with: Replace with new battery Date: 18/04/2018

Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Description : Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Last Answer : Four Factors affecting Selection of Material Handling System: [1] Adaptability and Flexibility [2] Type of Material to be handled [3] Type of Layout [4] Type of Production [5] ... [11] Cost of installation and handling Suitable Material Handling Devices for Following Activities:

Define route sheet. Explain a route sheet in detail. Also state significance of it.

Description : Define route sheet. Explain a route sheet in detail. Also state significance of it.

Last Answer : Definition of Route sheet  Route sheet is written document which includes operation number, description of operation, machine used, tools and gauges used and standard time for any particular operation. The ... the efficiency of a work centre. [6] It helps to trace the material movement.

Explain the various steps for planning a process for product from raw material to finished product in an industry.

Description : Explain the various steps for planning a process for product from raw material to finished product in an industry.

Last Answer : 1. Analysis of Product and its specification: - During analysis, following parameter should be considereda. Drawing and specification of product. b. Quality of product. c. Number of parts/components per ... and fixing the rates of payment. 11. Prepare the route sheet and operation sheet.

List down eight important steps for planning a process for a product from raw material to finished product in an industry.

Description : List down eight important steps for planning a process for a product from raw material to finished product in an industry.

Last Answer : Steps for Process Planning for a Product from Raw Material to Finished Product: Specific activities involved in planning a process for a product from raw material to finished product in an ... gauges required for inspection. This operation described in detail, in later section of this chapter.

Explain 3-2-1 principle of locations with suitable example and neat diagram

Description : Explain 3-2-1 principle of locations with suitable example and neat diagram

Last Answer : 3-2-1 Principle of Location used in Jig & Fixtures: It is also known as six pin or six point location principle. In this, the three adjacent locating surfaces of the blank (work piece) are ... [7] Another pin F in the second vertical face of the fixed body, arrests degree of freedom 9.

What is combine operation? Give two examples of combined operations.

Description : What is combine operation? Give two examples of combined operations.

Last Answer : Combined Operation: 1. In order to save the operation and setting time of part, while the part is subjected to machining process, the different operations to be performed are combined together or ... etc. 2. Integration Method: Operation on turret lathe, multi spindle automats, CNC operations etc.

____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Description : ____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Last Answer : A

Explain the need and importance of material handling devices in an industry.

Description : Explain the need and importance of material handling devices in an industry. 

Last Answer : Need of material handling devices: Material handling is an important activity in the industries. A large part of indirect labour employed in an industry is engaged in handling of materials. It has ... material handling and provides proper working conditions. 6. Reduced in process inventory.

Write any one application for each of following material handling equipments: (i) Bucket Conveyors (ii) Fork Lift Trucks (iii) Jib Crane (iv) Gravity Chutes

Description : Write any one application for each of following material handling equipments: (i) Bucket Conveyors (ii) Fork Lift Trucks (iii) Jib Crane (iv) Gravity Chutes

Last Answer : Applications of MH Equipments:

Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Description : Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Last Answer : Types of material handling devices 1.Trucks : i) Power lift : a. Fork lift b. elevating platform ii) Hand Lift. iii) Porters trolley. 2.Tractors and trailers 3. Hoist and cranes: ... bands can also be used. 5. Speed of belt normally ranges from 1 m/s to 70 m/s.

Suggest appropriate material handling device for

Description : Suggest appropriate material handling device for 

Last Answer : (i) Transporting coal in thermal power plant - Belt Conveyor. (ii) Transporting cotton in ginning unit - Trucks, Tractors and trailers. (iii) Transporting pallets - Fork lift truck, hand lift ... packed boxes of biscuits within industry - Hand wheel barrow or hand trolley or Porter's trolley.

Write stepwise procedure for converting raw material into finished product.

Description : Write stepwise procedure for converting raw material into finished product.

Last Answer : Planning of process from raw material to finished product:- Steps involved in process planning: 1. Analysis of Product and its specification: - During analysis, following parameter should be considered, ... fixing the rates of payment. 11. Prepare the route sheet and operation sheet.

Name the material handling devices for following activities:

Description : Name the material handling devices for following activities:

Last Answer : (i) To move and stack material at height:- Fork lift truck (ii) To lift heavy stones at height:- Cranes (iii) To move cement bags at a short and fixed distance:- Conveyor (iv) To move chemical from store to storage tank:- Pipelines

Describe various principles of material handling in details.

Description : Describe various principles of material handling in details.

Last Answer : A) Related to planning. - All activity should be planned. - Plan a system which include all the handling activities & co-coordinating the operations. - Simplification ... Performance efficiency principle: Determine efficiency of material handling performance in terms of expense per unit handled.

Explain with neat sketch any two material handling devices used in mass production.

Description : Explain with neat sketch any two material handling devices used in mass production.

Last Answer : 1.Roller conveyors may be gravity aided or powered and are employed for transporting products having flat bottoms. Bigger jobs can be handled as they are, whereas small items are put in boxes, tins ... and unloading of the products.   4.Screw Conveyor, Pneumatic Conveyor, Elevated Conveyor . 

Define productivity index. State it with respect to labour, material and machine.

Description : Define productivity index. State it with respect to labour, material and machine.

Last Answer : Productivity Index:- It is used to compare the productivity during the current year with the productivity during the base year. Base year is any year which the company users or comparative study. ... key actor in economic production/operation..It is Number o units produced per cost o material.

Explain any six factors on which selection of material handling device depends.

Description : Explain any six factors on which selection of material handling device depends.

Last Answer : Factors Affecting the selection of Materials Handling Devices/Equipment: [1] Adaptability: The load carrying and movement characteristics of the equipment should fit the materials handling problem. [2] ... The consideration of the cost of the MH Equipment is an obvious factor in its selection

List four material handling devices and also write one application of each.

Description : List four material handling devices and also write one application of each.

Last Answer : 1. Fork lift truck - To move and stack material at height. 2. Cranes - To lift heavy stones at height. 3. Conveyor - To move cement bags at a short and fixed distance. 4. Pipelines - To move chemical from store to storage tank. 

Explain the principles considered for selection of material handling equipment.

Description : Explain the principles considered for selection of material handling equipment.

Last Answer : 1. Planning :All activity should be planned. Plan a system which include all the handling activities & co-coordinating the operations. 2. Simplification principle: Reduced or eliminate ... 10. Maintenance principle: Plan for preventing maintenance and schedule repair of all handling equipment

What are the factors to be considered to determine stages of inspection during process planning?

Description : What are the factors to be considered to determine stages of inspection during process planning?

Last Answer : Factors to be considered to determine stages of Inspection during Process Planning: 1. Type of Production System 2. Type of Facility Layout 3. Type (Nature) of Product/Components 4. ... /Equipments used 5. Application of the Product/Components etc. 6. Strength/characteristics of the product

State the information required to do process planning. What is working drawing?

Description : State the information required to do process planning. What is working drawing?

Last Answer : Information required to do process planning: [1] Assembly and Part drawings and Bill of Materials [2] Technical Details of Machine/Equipment to be used [3] Standard Times for operation ... their functional positions or as an exploded view where we relate the parts to their functional positions.

Explain in brief steps involved in process planning.

Description : Explain in brief steps involved in process planning.

Last Answer : Steps involved in process planning: 1. Analysis of Product and its specification: - During analysis, following parameter should be considered, a. Drawing and specification of product. b. Quality of ... and fixing the rates of payment. 11. Prepare the route sheet and operation sheet.

State the different factors affecting process planning.

Description : State the different factors affecting process planning. 

Last Answer : Factors affecting process planning. a. Size and shape of part: The size and shape of many components decides the basic operations for the manufacturing of pert. For example : For manufacturing ... give process engineer sufficient time to go details of each aspect to select most economical process.

Differentiate between product layout and process layout on the basis of 1) Initial investment cost. 2) Cycle Time. 3) Types of machines used. 4) Skill of labour required. 5) Inventory level. 6) Arrangement of machine.

Description : Differentiate between product layout and process layout on the basis of 1) Initial investment cost. 2) Cycle Time. 3) Types of machines used. 4) Skill of labour required. 5) Inventory level. 6) Arrangement of machine. 

Last Answer : Parameter Product layout Process layout 1) Initial investment cost. It requires higher initial investment. Less initial investment 2) Cycle Time. Less cycle time for ... similar operation are grouped together to make a section, like lathe section, milling section etc.

Define process planning. State the factors affecting process planning and explain it.

Description : Define process planning. State the factors affecting process planning and explain it.

Last Answer : Definition of Process planning: Process planning can be defined as the systematic determination of the process by which a product is to be manufactured economically and competitively. Factors ... process engineer sufficient time to go details of each aspect to select most economical process.

Explain the factor affecting process planning.

Description : Explain the factor affecting process planning.

Last Answer : Factors affecting process planning. a. Size and shape of part: The size and shape of many components decides the basic operations for the manufacturing of pert. For example : For manufacturing ... process engineer sufficient time to go details of each aspect to select most economical process. 

Define process planning and explain the steps in process planning.

Description : Define process planning and explain the steps in process planning.

Last Answer : Process Planning is the selection of a systematic method or process by which the product is to be manufactured economically and competitively. Steps: 1) Study of part drawings and its specifications. ... product. 10) Preparation of route and operation sheet which is also called process sheet.  

Explain the different recording techniques used in method study. Also outline process chart for checking diameter of 50mm of shaft.

Description : Explain the different recording techniques used in method study. Also outline process chart for checking diameter of 50mm of shaft.

Last Answer : Different recording techniques used in method study: Process charts are used to record the data systematically so that none of the information needed for study and analysis is missed. A. Chart indicating ... area. However, there is no indication of the direction or speed of motion.

Explain in brief product and process type layout

Description : Explain in brief product and process type layout

Last Answer : Product Layout:- It is also known as line layout. It implies that various operations on raw materials are performed in a sequence and the machines are placed along the product flow line i.e. machines are ... lathes will be at one place, all milling machines will be at one place etc

Define process planning and state its functions

Description : Define process planning and state its functions

Last Answer : Process Planning  Process planning can be defined as the systematic determination of the methods by which a product is to be manufactured, economically and competitively. Process planning consists of devising, selecting ... generation of NC part program. [8] To design the Jig and Fixture.

Construct a two handed process chart for an activity of replacing old refill from the ball pen with summary.

Description :  Construct a two handed process chart for an activity of replacing old refill from the ball pen with summary.

Last Answer : Two handed process chart Date of charting – 20/11/2019 Activity- Replacing old refill from ball pen charted by - XYZ Chart begins – both hands free before activity Chart ends – both hands free after activity Summary

State and explain various factors affecting process planning.

Description : State and explain various factors affecting process planning.

Last Answer : Factors affecting process planning:  a. Size and shape of part: The size and shape of many components decides the basic operations for the manufacturing of pert. For example : For ... generally do not allow process engineer to select most economical process and tool for economic production. 

Define plant layout. Explain in detail 'Process layout' with neat sketch.

Description : Define plant layout. Explain in detail 'Process layout' with neat sketch.

Last Answer : Definition of Plant layout It is defined as the systematic arranging of various facilities like equipments, machines manpower, and inspection areas, etc and services within the area  of plant ... required for product manufacturing Less cost of investment General purpose machines are used

Assume a two address format specified as source, destination. Examine the following sequence of instruction and explain the addressing modes used and the operation done in every instruction?

Description : Assume a two address format specified as source, destination. Examine the following sequence of instruction and explain the addressing modes used and the operation done in every instruction?

Last Answer : 1. Move (R5) +, R0 2. Add (R5) +, R0. 3. Move (R0), (R5) 4. Move 16(R5), R3 5. Add #40, R5

The output voltage V0 of the Schmitt trigger shown in figure swings between +15V and —1 5V. Assume that

Description : The output voltage V0 ofthe Schmitt trigger shown in figure swings between +15V and -1 5V. Assume that the operational amplifier is ideal. The output will change from +1 5 V to -1 5V when the ... slope only C) Vin the positive and negative slopes D) 3 V in the positive and negative slopes

Last Answer : The output voltage V0 ofthe Schmitt trigger shown in figure swings between +15V and —1 5V. Assume that the operational amplifier is ideal. The output will change from +1 5 V to -1 5V when the instantaneous value of the input sine wave is 5 V in the positive slope only

Assume that the n—channel MOSFET shown in figure is ideal and that its threshold voltage is +1 .0 V.

Description : Assume that the n-channel MOSFET shown in figure is ideal and that its threshold voltage is +1 .0 V. The voltage Vab between nodes a and b is A)5V B)2V C)1V D)0V

Last Answer : Assume that the n-channel MOSFET shown in figure is ideal and that its threshold voltage is +1 .0 V. The voltage Vab between nodes a and b is 0V

The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage of the point with no filling or cutting is (A) (6 + 15) chains (B) (6 + 12) chains (C) (6 + 18) chains (D) None of these

Description : The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage ... 15) chains (B) (6 + 12) chains (C) (6 + 18) chains (D) None of these

Last Answer : (B) (6 + 12) chains

From which of the following is robot programming language. (A) VAL (B) AML(C) ABD (D) Both (A) & (B)

Description : From which of the following is robot programming language. (A) VAL (B) AML (C) ABD (D) Both (A) & (B)

Last Answer : D

____ grippers are used to pick up light weight materials such as paper,cloth etc. (A) Mechanical grippers (B) Adhesive grippers (C) Vacuum cup grippers (D) Magnetic grippers

Description : ____ grippers are used to pick up light weight materials such as paper,cloth etc. (A) Mechanical grippers (B) Adhesive grippers (C) Vacuum cup grippers (D) Magnetic grippers

Last Answer : B

From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Description : From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Last Answer : D

Grippers are used to_____. (A) Hold the objects (B) Sense the objects (C) Move the objects (D) Both (A) & (C)

Description : Grippers are used to_____. (A) Hold the objects (B) Sense the objects (C) Move the objects (D) Both (A) & (C)

Last Answer : D

The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Description : The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Last Answer : A

The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Description : The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Last Answer : C

The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Last Answer : C

Which is also known as work volume of robot. (A) Work envelope (B) Speed of movement(C) Load carrying capacity (D) Precision of movement

Description : Which is also known as work volume of robot. (A) Work envelope (B) Speed of movement(C) Load carrying capacity (D) Precision of movement

Last Answer : A