Enlist the factors affecting on silting of reservoir.

Enlist the factors affecting on silting of reservoir.
by

1 Answer

Answer :

a) Catchment area

b) Shape of catchment

c) Slope of country

d) Nature of surface soil

e) Climatic conditions

f) Rainfall characteristics

g) Vegetation cover

h) Construction of check dam
by

Related questions

The rate of silting in a reservoir (A) Is less in the beginning (B) Remains constant throughout (C) Is more in the beginning (D) is more in the beginning and reduces in the end

Description : The rate of silting in a reservoir  (A) Is less in the beginning  (B) Remains constant throughout  (C) Is more in the beginning  (D) is more in the beginning and reduces in the end 

Last Answer : (D) is more in the beginning and reduces in the end 

Differentiate filtration and clarification. Enlist the different factors affecting the rate of filtration.

Description : Differentiate filtration and clarification. Enlist the different factors affecting the rate of filtration.

Last Answer : Sr.No. Filtration Clarification 1 It is the separation of an insoluble solid from a fluid or gas by means of a porous medium that retain the solid but allow the fluid to pass. ... be filtered. 6. Particle size: 7. Pore size of filter medium: 8. Nature of solid material:

Enlist four factors affecting selection of cleaning process.

Description : Enlist four factors affecting selection of cleaning process.

Last Answer : 1. Type of Contaminants 2. Composition of metal 3. Thickness of rust and scale 4. Degree of cleanliness required 5. Condition of metal 6. Surface finish tolerances 7. Allowable metal loss.

Enlist the factors affecting on selection of survey station or survey line in chain survey.

Description : Enlist the factors affecting on selection of survey station or survey line in chain survey.

Last Answer : Following are the factors affecting on selection of survey station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole ... level ground. 9) The survey lines should run as far as possible nearer to object.

Enlist the types of gates provided to reservoir.

Description : Enlist the types of gates provided to reservoir.

Last Answer : A. Non-automatic Gates: i) Radial ot Taintor gate  ii) Vertical gate: 1) Sliding gate  2) Fixed gate  3) Stony gate  iii) Rolling gate B. Automatic Gate: i) Reynolds Gate  ii) Vishveshrayya gate

The main cause of recurring flood is – (1) Soil erosion (2) Deforestation (3) Silting of river beds (4) All of the above

Description : The main cause of recurring flood is – (1) Soil erosion (2) Deforestation (3) Silting of river beds (4) All of the above

Last Answer : (4) All of the above Explanation: Floods are caused by a variety of factors, both natural and man-made. Apart from soil erosion and silting of river beds which force the water of rivers ... against water flow and in turn protect the underlying soil from getting eroded and then getting washed away.

Which of the following was not a purpose for building Farakka Barrage? (1) Checking water flowing into Bangladesh (2) Checking silting of Kolkata Port (3) Preventing erosion of Kolkata Port (4) Facilitating navigation in Ganga river

Description : Which of the following was not a purpose for building Farakka Barrage? (1) Checking water flowing into Bangladesh (2) Checking silting of Kolkata Port (3) Preventing erosion of Kolkata Port (4) Facilitating navigation in Ganga river

Last Answer : (4) Facilitating navigation in Ganga river Explanation: The Farakka Barrage was created by India in 1975 to divert water from the Ganges River to the Bhagirathi-Hooghly river system. It was ... to flush out the sediment deposition from the Kolkata harbour and thus prevent erosion of Kolkata port.

The increased incidence of floods in recent times in North India is due to – (1) increase in the annual rainfall, (2) increase in the silting of dams, (3) increased deforestation in the catchment area, (4) None of these

Description : The increased incidence of floods in recent times in North India is due to – (1) increase in the annual rainfall, (2) increase in the silting of dams, (3) increased deforestation in the catchment area, (4) None of these

Last Answer : (3) increased deforestation in the catchment area, Explanation: The frequency and severity of flooding in the Gangetic plain has steadily increased in recent years. Deforestation of the Terai appears to be one of the major causes.

With self cleansing velocity in sewers A. Silting occurs at bottom B. Scouring occurs at bottom C. Both silting and scouring occur at bottom D. Neither silting nor scouring occurs at bottom

Description : With self cleansing velocity in sewers A. Silting occurs at bottom B. Scouring occurs at bottom C. Both silting and scouring occur at bottom D. Neither silting nor scouring occurs at bottom

Last Answer : ANS: D

Clogging of sewers, is caused due to A. Silting B. Low discharge C. Greasy and oily matters D. All the above

Description : Clogging of sewers, is caused due to A. Silting B. Low discharge C. Greasy and oily matters D. All the above

Last Answer : ANS: D

In sewers designed with self cleansing velocity, A. The bottom is silted B. The bottom is scoured C. Both silting and scouring occur at the bottom D. Neither silting nor scouring occurs at the bottom

Description : In sewers designed with self cleansing velocity, A. The bottom is silted B. The bottom is scoured C. Both silting and scouring occur at the bottom D. Neither silting nor scouring occurs at the bottom

Last Answer : ANS: D

Economic height of a dam is the height corresponding to which (A) Cost of the dam per unit of storage is minimum (B) Amount of silting is less (C) Cost of dam per unit storage is maximum (D) Free board provided is least

Description : Economic height of a dam is the height corresponding to which  (A) Cost of the dam per unit of storage is minimum  (B) Amount of silting is less  (C) Cost of dam per unit storage is maximum  (D) Free board provided is least 

Last Answer : (A) Cost of the dam per unit of storage is minimum 

A river bend characterized by silting (A) Scouring on concave side (B) Silting on convex side (C) Scouring on convex side and on concave side (D) Scouring on concave side and silting on convex side

Description : A river bend characterized by silting (A) Scouring on concave side (B) Silting on convex side (C) Scouring on convex side and on concave side (D) Scouring on concave side and silting on convex side

Last Answer : Answer: Option D

An aggrading river is a (A) Silting river (B) Scouring river (C) Both silting and scouring river (D) Neither silting nor scouring river

Description : An aggrading river is a (A) Silting river (B) Scouring river (C) Both silting and scouring river (D) Neither silting nor scouring river

Last Answer : Answer: Option A

Soundings are required for (A) Making nautical charts for navigation (B) Ascertaining the areas subject to scour or silting (C) Obtaining detailed information for construction (D) All the above

Description : Soundings are required for (A) Making nautical charts for navigation (B) Ascertaining the areas subject to scour or silting (C) Obtaining detailed information for construction (D) All the above

Last Answer : (D) All the above

Two different channels, M and N, in two different sites are designed based on Lacey’s theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) Channel M will have steeper longitudinal slope b) Channel N will have steeper longitudinal slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Description : Two different channels, M and N, in two different sites are designed based on Lacey's theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) ... slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Last Answer : b) Channel N will have steeper longitudinal slope

The removal of top soil by water or wind is called (1) Soil wash (2) Soil erosion (3) Soil creep (4) Silting of soil

Description : The removal of top soil by water or wind is called (1) Soil wash (2) Soil erosion (3) Soil creep (4) Silting of soil

Last Answer : (2) Soil erosion

Justify the remedial measures for the following defects in earthen road: i) Formation of dust during dry weather ii) Growth of vegetation inside drains and their silting up

Description : Justify the remedial measures for the following defects in earthen road: i) Formation of dust during dry weather ii) Growth of vegetation inside drains and their silting up

Last Answer : i) Formation of dust during dry weather: The dust nuisance may be remedied by the following methods: Frequent sprinkling of water Treatment with calcium chloride Use of other dust palliatives Use of ... the drain. Silting up of weeds, plants, bushes etc. causes obstruction in the flow of water.

The main cause of recurring flood is (1) Soil erosion (2) Deforestation (3) Silting of river beds (4) All of the above

Description : The main cause of recurring flood is (1) Soil erosion (2) Deforestation (3) Silting of river beds (4) All of the above

Last Answer : All of the above

Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Description : Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Last Answer : Four Factors affecting Selection of Material Handling System: [1] Adaptability and Flexibility [2] Type of Material to be handled [3] Type of Layout [4] Type of Production [5] ... [11] Cost of installation and handling Suitable Material Handling Devices for Following Activities:

Enlist factors considered for selecting a testing tool for test automation.

Description : Enlist factors considered for selecting a testing tool for test automation.

Last Answer : The following factors are important during tool selection: i. Assessment of the organization's maturity (e.g. readiness for change); ii. Identification of the areas within the organization where ... the tool is another important point to be considered while selecting and deploying the test tool.

Enlist any two factors on which friction coefficient ‘F’ depends.

Description : Enlist any two factors on which friction coefficient ‘F’ depends.

Last Answer : i. Diameter of pipe ii.Velocity of flow  iii. Reynold’s number of the flow  iv.Roughness condition of the pipe surface

Explain two factors affecting the development of the cotton textile in India. -Geography

Description : Explain two factors affecting the development of the cotton textile in India. -Geography

Last Answer : Two factors affecting the development of the cotton textile in India are : 1. Competition with synthetic textile. 2. Obsolete Machinery.

Explain any five factors affecting the location of an industry. -SST 10th

Description : Explain any five factors affecting the location of an industry. -SST 10th

Last Answer : Five factors that affect the location of an industry: 1. Raw material: Availability of raw material is very important for the location as it is one of the basic inputs required. 2. ... Market: A nearby market place makes it much easier to sell goods produced and reduces transportation cost.

State any two factors affecting the economic viability of mineral reserves. -SST 10th

Description : State any two factors affecting the economic viability of mineral reserves. -SST 10th

Last Answer : (i) The mineral content of the ore must be in sufficient concentration to make its extraction commercially viable. (ii) The type of formation or structure in which minerals are found determines the relative ease with which mineral ores may be mined. This also determines the cost of extraction.

Explain any five factors affecting the location of an industry. -SST 10th

Description : Explain any five factors affecting the location of an industry. -SST 10th

Last Answer : The factors affecting the location of an industry: (i) Availability of raw material. (ii) Availability of cheap labour. (iii) Availability of capital and bank facilities. (iv) Availability ... . (v) Proximity to markets. (vi) Availability of adequate and swift means of transport.

name the Factors affecting perspectives in communication -Other

Description : name the Factors affecting perspectives in communication -Other

Last Answer : Factors affecting Perspectives in Communication Factor How the factor can become a barrier Language In case of use of incorrect words, unfamiliar language and lack of detail, language can act as a ... thumb may mean ‘good job’ done for some people but may be insulting to others.

What are the factors affecting the rate of diffusion? -Biology

Description : What are the factors affecting the rate of diffusion? -Biology

Last Answer : answer:

Internal factors affecting the rate of respiration plants? -Biology

Description : Internal factors affecting the rate of respiration plants? -Biology

Last Answer : answer:

Environmental factors affecting the rate of respiration. -Biology

Description : Environmental factors affecting the rate of respiration. -Biology

Last Answer : answer:

Factors affecting plant growth. -Biology

Description : Factors affecting plant growth. -Biology

Last Answer : answer:

Factors affecting health. -Biology

Description : Factors affecting health. -Biology

Last Answer : answer:

Factors affecting vernalization. -Biology

Description : Factors affecting vernalization. -Biology

Last Answer : answer:

Factors affecting vernalization. -Biology

Description : Factors affecting vernalization. -Biology

Last Answer : answer:

what are the factors affecting rates of transpiration???? -Biology

Description : what are the factors affecting rates of transpiration???? -Biology

Last Answer : answer:

what are the factors affecting rates of transpiration???? -Biology

Description : what are the factors affecting rates of transpiration???? -Biology

Last Answer : answer:

What are the factors affecting evaporation? Explain how rate of evaporation affects by them. -Maths 9th

Description : What are the factors affecting evaporation? Explain how rate of evaporation affects by them. -Maths 9th

Last Answer : Factors That Affect the Rate of Evaporationtemperature of the liquid. A cup of hot water will evaporate more quickly than a cup of cold water.exposed surface area of the liquid. ...presence or ... substances in the liquid. ...air movement. ...concentration of the evaporating substance in the air.

What are the factors affecting diffusion? -Maths 9th

Description : What are the factors affecting diffusion? -Maths 9th

Last Answer : FactorReasonThe concentration gradientThe greater the difference in concentration, the quicker the rate of diffusion.The temperatureThe higher the temperature, the more kinetic energy the particles will have, so they will move and mix more quickly.

The plant or internal factors affecting photosynthesis are dependent on the (A)_____ and the (B)____ of the plant.

Description : The plant or internal factors affecting photosynthesis are dependent on the (A)_____ and the (B)____ of the plant.

Last Answer : The plant or internal factors affecting photosynthesis are dependent on the (A)_____ and the (B)____ of the plant.

Mention factors affecting adsorption of gas on solids.

Description : Mention factors affecting adsorption of gas on solids.

Last Answer : Mention factors affecting adsorption of gas on solids.

Factors affecting demand?

Description : Factors affecting demand?

Last Answer : Economies

What are the factors affecting viscosity?

Description : What are the factors affecting viscosity?

Last Answer : Temperature, concentration, sometimes also internal fluid velocity. Moreover density, type of liquid, surface where it flows, viscous drag.

Factors affecting enzyme activity: (A) Concentration (B) pH (C) Temperature (D) All of these

Description : Factors affecting enzyme activity: (A) Concentration (B) pH (C) Temperature (D) All of these

Last Answer : Answer : D

What are the factors affecting the selection of Maximum flux density?

Description : What are the factors affecting the selection of Maximum flux density?

Last Answer : 1. Net core weight: Higher the flux density lesser net weight of core. 2.Saving in copper:Higher the flux density lesser mean turn of windings. 3.Overall economy: Higher the flux ... High Flux density results in high losses and hence efficiency decreases 8.Hence high temperature rise and noise

What are the factors affecting voltage regulation?

Description : What are the factors affecting voltage regulation?

Last Answer : Load current Equivalent resistance Equivalent reactance power factor

Name four factors affecting rate of reduction.

Description : Name four factors affecting rate of reduction. 

Last Answer : 1) Nature of reactants 2) Temperature 3) Concentration 4) Catalyst

What are the factors affecting the mobility in electrophoresis?

Description : What are the factors affecting the mobility in electrophoresis?

Last Answer : Net charge on the particles (pI of proteins), mass and shape of the particles, the pH of the medium, strength of electrical field, and properties of the supporting medium.

Which of the following factors or conditions is an auditor least likely to plan an audit to discover? a. High turnover of senior management. b. Inadequate monitoring of significant controls. c. Inability to generate positive cash flows from operations. d. Financial pressures affecting employees

Description : Which of the following factors or conditions is an auditor least likely to plan an audit to discover? a. High turnover of senior management. b. Inadequate monitoring of significant controls. c. Inability to generate positive cash flows from operations. d. Financial pressures affecting employees

Last Answer : Financial pressures affecting employees

PSA 315 requires that the auditor should obtain an understanding' of relevant industry, regulatory and other external factors including the applicable financial reporting framework. Which of the following is not an example of matters relating to regulatory environment that the auditor would usually consider? a. Regulatory framework for a regulated industry. b. Product technology relating to the entity's product. c. Legislation and regulation significantly affecting the entity's operationd. Taxation

Description : PSA 315 requires that the auditor should obtain an understanding' of relevant industry, regulatory and other external factors including the applicable financial reporting framework. Which of the ... product. c. Legislation and regulation significantly affecting the entity's operation d. Taxation

Last Answer : Product technology relating to the entity's product

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate.(b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum. (c) Tomato is a greenhouse crop which can be grown in CO2-enriched atmosphere for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate. ( ... for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Last Answer : (b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum